压铸新产品工模及样板制作计划进度表常用语
工模排位图(Die location layout)        
平面/实体图(2D/3D drawing)
水口设计(gate design)                     工模设计(mold design)
订料(purchase of die steel)               CNC铜公(electrode made by CNC)
模加工(die fabrication)                     热处理(heat treatment)
磨床加工(grinding by precision grinding machine)                            
淬火后CNC锣(CNC milling after quenching)
 线切割加工(machining by CNC wire-cut machine)                                           电蚀火花加工[machining by electric discharge machine(EDM) ]                               省模(Die polished)                
试模(Die trial)                                       压铸(die casting)          
磨夹口(Removing parting line flash)
 磨光(polishing)      
（水）震机(water/vibrating)
喷油(painting)                                     电镀(E-plating)
扫尼龙(brushed to satin surface)    
包装(packaging)
样板入仓(sample stored  in warehouse)
锌合金压铸工艺常用语
原材料入厂(incoming in warehouse)    来料检验(IQC)
压铸(die casting)      冲水口(degating)
刮项针位批锋(removing burrs round pads of ejector pin )
挤牙(rolled threads)      磨夹口(removing parting line flash)
磨/抛光(polishing/buffing)    外发电镀(to e-plating subcontractor)
外观全检(appearance full-inspection)    包装(packaging)
不合格(NG)      检查报告(inspection report)
退回供应商(return to supplier)  选用或回炉报废(selection or remelting)
自检(self-inspection)
铝合金压铸工艺常用语（中英文双语）
原材料入厂 (incoming in warehouse)    来料抽检 (IQC)
压铸(die casting)    冲水口(degating)
两侧/上下/曲面磨#320砂 (abrasive belt grinding on both sides/top and bottom/curved surface: #320 grit)
手磨边角(manual sanding at edge/corner)replaceable    全检(full-inspection)
QC抽检(QC sampling inspection)    上挂(racking)
超声波除腊(ultrasonic clean)    过水(rinsing)
热浸除油(soak cleaning)    阴极电解除油(electro clean)
巡检(tour-inspection)    沉锌(zinc deposit)
活化(activation)    半光镍(semi-bright nickel)
回收(collection)    哑镍(matte nickel-plating)
光铬(bright chromium-plating)  后处理过水(rinsing after finishing)
烘干(baking)
镁合金压铸工艺常用语
压铸(die casting)
铜丝刷磨面(brushed surface by brass brush wheels)
QC巡检(QC tour-inspection)
剪水口(degating)      冲内窗口(internal frame trimming)
磨四边批锋(removing flash around external frame)
刮顶针批锋(removing burrs round pads of  ejector pin)
锉内窗四边(filing internal frame)
内窗四边磨砂纸(abrading internal frame by abrasive paper)
刮四按钮孔(removing burrs in 4 button holes)    全检(full-inspection)
钻孔(drilling)      攻牙(tapping)      钝化(passivating)
喷油前全检(full-inspection prior to painting)
抹天那水(wiping with toluene)
背面喷面油(applying top coat to bottom surface)
表面喷底油(applying primer coat to top surface)
烘干(baking)    表面喷面油(applying top coat to top surface)
移印/丝印(PAD printing/silk screening)    抽检(sampling inspection)
全检(full-inspection)    包装(packaging)
锌镁铝合金压铸件钝化工艺常用语
1. 水震除油(water vibratory cleaning)    2. 过清水(rinsing)
3.酸洗(acid dip/pickling)    4. 钝化(passivating)    5. 除油(degreasing)
6.除油缸温度(temperature in degreasing tank )
7. 除油时间(degreasing time)
8. 除油粉浓度(degreasant concentration)    9. 浸渍(dipping)
10. 浸渍缸温度(temperature in dipping tank)
11. 钝化缸温度(temperature in passivating tank)
12. 钝化液浓度(passivating agent concentration)    13. 脱脂(degreasing)
14. 刻蚀(descaling)      15. 碱洗(alkali cleaning)
16. 表调(surface conditioning)  17. 化成(chemical pretreatment)            18. 热水洗(hot water rinsing)    19. 烘干(baking)
锌镁铝合金压铸件电镀喷涂工艺常用语
1.电珍珠铬工艺常用语(Commonly used terminology in process for pearl chrome plating)
硫酸清洗 sulfuric acid clean    超声波除蜡ultrasonic clean
除油degreasing     电解除油 electro clean    酸浸 acid dip
预镀碱铜 alkali copper  焦铜 pyrophosphate copper    酸铜 acid copper
半光叻 semi-bright nickel  氯化叻 nickel chloride    珍珠叻pearl nickel
电铬chromium plated    热水洗 hot water rinsing    烘干 baking
2. 电光铬工艺常用语(Commonly used terminology in process for bright chrome plating)
三氯乙烯清洗 trichloroethylene clean    上挂具 racking
除蜡水洗 ultrasonic clean  电解缸 electro clean
酸水 acid dip    预红铜电镀 copper strike    电红铜 copper
酸水 acid    焦铜 pyrophosphate copper    酸铜 acid copper
半光叻 semi-bright nickel  氯化叻 nickel chloride  打底叻 primer nickel
镍 bright nickel    电铬chromium plated  烘干baking
3.静电喷涂工艺常用语(Commonly used terminology in process for electrostatic coating)
合格件上挂 racking    加热脱脂 hot degreasing
水洗 rinsing    酸洗 acid dip    中和 neutralization

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。