FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite TM
A10 Series
not connected to the unit and the environment in which you are working on is protected from
Electro-Static Discharge(ESD).
A10 Series
BATTERY PACK REMOVAL
1.  Turn the computer upside down as shown.
2.  Slide the battery release lever in the direction of  the      arrow.
3.  Lift out  the battery pack assy .
HDD REMOVAL
1. Turn the computer upside down.
2. Remove two M2.5x16 black flat head screws        securing HDD slot cover  and pull out the cover ..
4. Separate the battery pack from the battery cover.
OPTIONAL PC CARD REMOVAL 1. Press the eject button  of the PC Card you want to      remove.
2. Press  the extended eject button  to pop the PC card    out slightly.
3. Grasp the  PC Card  and pull it out
NOTE : Before removing any PCMCIA device, make sure              it is “STOPPED” in the PC Card Manager.
A10 Series
Battery pack
Battery cover
6. Remove four M3x4 brass flat head screws securing    the HDD bracket to the drive.
4. Slowly spread out the memory clips  and pull the    memory module out of the connector on a 45 degree    angle.
3. Remove one M2.5x5 black flat head screw  securing    the HDD assembly.
4. Grasp the  HDD bracket handle  and pull to    disconnect the HDD assembly.
5. Lift the HDD assembly  out of the HDD bay.
MEMORY MODULE REMOV AL
1. Turn the computer upside down.
2. Remove one M2.5x4 black flat head screw
securing  the memory cover.3. Lift out the  cover .
A10 Series
M2.5x5 black flat head screw
HDD assy
HDD bracket handle
M3x4 brass flat head screws
M2.5x4 black flat head screw
replaceableMemory module
Memory clips
WIRELESS LAN CARD REMOVAL
1. Turn the computer upside down.
2. Remove one M2.5x4 black flat head screw securing    the Mini PCI slot cover.
3. Lift out the PCI slot cover .
4. Peel off the glass tape
securing the mini coax cables.5. Disconnect the
white mini coax cable  from main    connector and the black mini coax cable  from    aux connector.
6. Gently press out the Mini PCI slot clips  and pull the
Mini PCI card  out of the connector on a 30 degree    angle.
MODEM BOARD REMOVAL
1. Remove one M
2.5x4 black flat head screw  securing    the modem slot cover.
2. Insert your finger nail or the case separator into the    notched side of the cover and lift up to release the    latch securing the modem slot cover.
3. Remove  two  M2x4 black screws securing the    modem board.
4. Gently lift up the modem board to disconnect it from    the system board and disconnect the MJ harness    from JP1 on the modem board.
A10 Series
Mini PCI card
PCI clips
White mini coax cable Black mini coax cable
Modem slot cover M2.5x4 black flat head screws Modem
MJ Harness
1. Turn the computer upside down.
2. Remove two M2.5x5 black flat head screws  and one    M2.5x16 black flat head screw  securing the    modem cover.
3. Remove the modem cover .COOLING MODULE REMOVAL
COOLING MODULE REMOVAL
1. Disconnect  the  fan cable  from
PJ8770 on the    system board.
2. Remove two M2.5x5 black flat head screws    securing the fan.
3. Lift out the fan
.
.2. Lift out the  CPU .
A10 Series
M2.5x5 black flat head screws
Cooling module brace Cooling module
1. Remove M2x6 brass screws  securing the cooling    module brace.
2. Lift out the cooling module brace .
3. Lift out the cooling module .
CPU
Close PJ8770
Fan
Fan cable

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。