T20DVFD
USER`S MANUAL
FLIP DOWN DVD PLAYER
COMPATIBLE WITH
DVD/SVCD/DVCD/VCD/CD/MP3/MP4/JPEG/DIVX
Before operating the monitor, please read this manual thoroughly and retain it for future reference.
1 The operating temperature of this product is limited to -4F + 176  F.Your vehicle can reach temperatures up to 212F in the summertime.
2 If  your vehicle is extremely hot or cold you must allow time for  your air    conditioner or heater to cool or heat the vehicle until operating    temperatures have returned to the normal operating ranges.
3  Optimum picture quality will be  achieved when viewed from directly  front    of the  monitor ( +/-30 degrees).
4 Do not open the housing  and attempt to make any repair yourself. Refer    servicing to qualified personnel.
5 DVD Players use an invisible laser beam which can cause hazardous radiation exposure. Be sure to operate the unit correctly as instructed.
6 Do not cut the car power supply off while a disc is palying. It can cause damage to the DVD Player.
°~°°
Check Point
Cautions on Use
Handing
. Do not use damaged ( cracked or werped ) disc.. Do not scratch signal surface or let it dirty.. Do not stick a label or a glue-based note on  either side of the disc.
. Do not use discs that have glue or damaged  label with exposed adhesive residue, it might  result in
damage to your DVD player.  Do not put discs in the sunshine.  Park your car in the shade
Storing discs
Always put  discs in their place and store them vertically.
Do not put discs in hot or humid place,
places exposed to direct sunlight and places in which the temperature is extremely low or high.
. Read any cautions included with the disc carefully
Cleaning discs
Fingerprints or dust on discs may reduce sound or picture quality. remove them by soft cloth wiping the disc from the center toward the edges gently.
For tough dirt, wipe softly with a wet cloth and then with a dry one.
Do not use any type of solvent such as thinner,benzene.
Do not use antistatic spray.
Irregularly shaped dies
Irregularly shaped dics( heart-shaped discs,hexagonal discs, etc. ) cannot be played on this player.
May cause damage to the player.
Only use round discs.
When holding with both hands
Name  and  function  of  each  part
UNIT
1.3.PLAY/PAUSE  button 5.EJECT  button 7.Dome  light  switch 9.Remote  control 11.Monitor release button
IR  transmitter /Dome  light
2.Up  button 4.Menu  button 6.Down  button 8.Power  led 10.Power  button 12.Disc  tray
Copyright protection .
This product incorporates copyright protection technology that is protected by methods claims of certain U.S. patents and other intellectual property rights owned by the Macrovision Corporation and other rights.Owner's use of this copyright protection technology must be authorized by the Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by the Macrovision Corportation.
Disc Information
DVD features
DVD disc provide high-resolution images with high- quality sound and surround sound effects. This DVD player can play not only DVD discs of various versions,but also S-VCD ,VCD , audio CD and MP3 discs.
Each disc only plays  the information saved in it, and some functions cannot be utilized.
Discs that cannot be played
DVD-RW, DVD- REM, CD-ROM, CD- EXTRA discs cannot be played on this unit. Also, a CD or a CD-RW which was recorded on special software cannot be played.
Region code
Your DVD player is designed and manufactured to region management information that is recorded on a DVD disc. The region number of this DVD Player is 1 . This DVD player plays free code also.
Caution
Wipe softly with a wet cloth and then with a try one.
Before playback, wipe the disc outward from the center with a clean cloth.
Do not use any type of solvent such as thinner, benzene, coommercially - available cleanners or antistatic spray.
To avoid damaging your DVD player, don't use a scratched disc.
How to handle the disc
Don't touch the shiny side of the disc ( the side with the embedded information ). Don't stick a lable or a glue - based note on either side of the disc. Don't use discs
that have glue or a damaged gluey label- it might result in damage to your DVD player, Don't put discs in the sunshine. Park your car in the shade.
31
1
24567
8
910
11
12move off
THE BACK PANEL
141315
13.Right audio output 14.Left audio output      15.video output
Name and function of each part Remote Control Unit
4.REV/FWD-Scan buttons
Use these buttons to scan forward and backward through pictures or sound.8.ANGLE button
Press it to switch the picture's angle.
2.EJECT button
Press this button to slide the disc out and in.3.NUMBER buttons
Press these buttons to input numbers.5.TITLE button
Press this button to display the DVD's title.7.ZOOM button
Zoom in or zoom out the picture on screen.9.FM button
Press this button switch different audio FM transmitting frequency.10.Program button
Use this button to program individually.1.MENU button
Press this button to display the LCD’s menu screen.12.PBC button Playback control.
14.Play/Pause button
Use this button to play picture or sound or stop temporarily.
15.STOP button
Press this button to stop playback of the picture or sound 16.10+ button
Press this button to select a program of
which the sequence number on the disc is more than 10.17 . DVD/AV buttons
Press these buttons to DVD/AV functions switch screen.
6.MENU  button
Press  this  button  to  display  the  DVD 's menu  screen .
Connection  Diagram
Installation (Professional  installation  recommended )
Unpack  and  check  the 2.Tighten  the  metal  support  bracket to  the  ceilling  support  beam (s ),using  the  supplied  screws .Take extra  care  to  not  penetr  ate  the roof  of  your  car .
3.Connect  the  wiring  harness ,according  to  the  diagram  under
"Connection  Diagram "on the following diagram .to  the  wires  located  in  the dome light  of  your  vehicle .
4.Flip  the  monitor  screen  down  and tighten  the  monitor  to  the  support bracket , using  the  supplied  screws .
11.VOL+ button
Press this button to volume up.13.POWER button
The power turns on and off when  this button is pressed.
18.MUTE button(In IR/FM mode, no effect )Press the button during playback to stop the audio  output. Press it again to resume.
20.PRE/ NEXT buttons
Use these buttons to search for the beginnings of tracks or chapters.21.ENTER button
Press it to confirm setting.22.SUBTITLE button
Press it to switch the DVD's subtitle languages.
23.SETUP button
Press it to enter or quit the SETUP Menu.
24.REPEAT button
For DVDs  use it to play title or chapters repeatedly.
For CDs, use it to play tracks or the entire disc repeatedly.
25.GOTO  button
Press this button , Select time or chapter to goto and play when disc is playing.26 . AUDIO button
Press it to switch the audio Lanuages.27.DISPLAY  button
Press it to display the disc information.
19.
CURSOR    ,    [LCD  menu
adjustmen  button
Use these buttons when select setting items to move the cursor up ,down, left and right. Press up , and down buttons to change TV channels.Advanced Functions
Search for a speacific scene 1.Press the SEARCH button.
2.Press the number button to select specific time or title chapter.
3.Press the ENTER button and playback starts from the nominated chapter.
. Selecting the DVD's angle ( multi-angle)
Press the ANGLE button while playing back a scene record with multiple angels.If your DVD disc is not recorded with multiple angles. ANGLE button is not effect.
Repeat play DVDs, Video CDs and CDs
. Repeat a TITLE, CHAPTER, or TRACK Press the REPEAT button.
Select the title, chapter, or track you want to repeat.
. Repeat a section between Point A and B .
During playback, press A-B button on  the  remote control at the starting point of the Section you want to repeat. ( Point A)
Press A-B button again at the ending point of the section you want to repeat. ( Point B ) Press A-B button third time to cancel the A-B repeat function.
28.VOL -. button
Press this button to volume down.

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。