[Linux]WINE安装教程作者：飘风飘雪文章来源：IT 更新时间：2010-1-26 10:41:23 因为我们学校的校园网是通过在本机运行一个客户端来上网的，所以我在linux下上网必须使这个软件能够运行，才能上咱linuxsir，于是我就想着怎么来安装一个最新版的wine来让它支持汉字。
下面是我的安装步骤：
安装前的准备
把原先的wine卸载掉，redhat 7.3有wine和wine-devel两个文件，先卸载掉第二个，然后再卸载第一个，如果你更好的想玩游戏，把OPENGL也升级一下，freetype不用升级了，redhat 7.3自带的就可以满足汉字的支持了。
把你的C盘挂接在linux下，建立目录来挂接
c盘
mkdir /winc
挂接C盘
mount /dev/hda1 /winc
下载wine的最新版到/wind，www.winehq上边有它的最新版
。
以普通用户登录linux，把拷贝到/tmp目录下，进入/tmp目录。
shell〉cd /tmp
解压wine
shell〉tar vfzx
进入解压后的目录
shell〉cd wine-20020804
用wine的安装工具进行安装
shell〉./tools/wineinstall
然后就是漫长的等待。
在安装过程中它要你回答yes/no，你选择yes就可以了。wine自动搜索windows的目录的，等你你编译完了，它要让你输入root的密码进入安装，这是就快安装完了，如果安装成功，就会有good lucky的提示。
在shell下运行wine，第一次运行不成功，这是正常，因为没有在/root/.wine/config 文件里配置好.到这些吧。
[Drive C]
"Path" = "/usr/share/win_c"
"Type" = "hd"
"Label" = "MS-DOS"
"Filesystem" = "win95"
改为:[Drive C]
"Path" = "/winc"
"Type" = "hd"
"Label" = "MS-DOS"
"Filesystem" = "win95"root的初始密码
就可以了，如果你安装了simsun字体.wine默认就会到这个字体的，下边就是我的
/root/.wine/config。
WINE REGISTRY Version 2
;; All keys relative to MachineSoftwareWineWineConfig
;;
;; MS-DOS drives configuration
;;
;; Each section has the following format:
;
; [Drive X]
;; "Path"="xxx" (Unix path for drive root)
;; "Type"="xxx" (supported types are 'floppy', 'hd', 'cdrom' and 'network') ;; "Label"="xxx" (drive label, at most 11 characters)
;; "Serial"="xxx" (serial number, 8 characters hexadecimal number)
;; "Filesystem"="xxx" (supported types are 'msdos'/'dos'/'fat',
'win95'/'vfat', 'unix')
;; This is the FS Wine is supposed to emulate on a certain
;; directory structure.
;; Recommended:
;; - "win95" for ext2fs, VFAT and FAT32
;
; - "msdos" for FAT16 (ugly, upgrading to VFAT driver strongly recommended) ;; DON'T use "unix" unless you intend to port programs using Winelib !
;; "Device"="/dev/xx" (only if you want to allow raw device access)
;;
[Drive A]
"Path" = "/mnt/floppy"
"Type" = "floppy"
"Label" = "Floppy"
"Serial" = "87654321"
"Device" = "/dev/fd0"
[Drive C]
"Path" = "/winc"
"Type" = "hd"
"Label" = "MS-DOS"
"Filesystem" = "win95"
[Drive D]
"Path" = "/mnt/cdrom"
"Type" = "cdrom"
"Label" = "CD-Rom"
"Filesystem" = "win95"
; make sure that device is correct and has proper permissions !
"Device" = "/dev/cdrom"
[Drive E]
"Path" = "/tmp"
"Type" = "hd"
"Label" = "Tmp Drive"
"Filesystem" = "win95"
[Drive F]
"Path" = "${HOME}"
"Type" = "network"
"Label" = "Home"
"Filesystem" = "win95"
[Drive Z]
"Path" = "/"
"Type" = "network"
"Label" = "Root"
"Filesystem" = "win95"

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。