Instruction Manual(EN)
construct用法Fourth Edition
This Instruction Manual describes important precautions to prevent any accident and procedures to
handle this product.
Read this Instruction Manual carefully to use this product safely.
After reading, keep this in a safe place where users can refer to as needed.
2D-53-0002680C
This section describes the "prohibitions" and "precautions" important for you to use NT110 safely. Before use, be sure to read this manual so that you can use the system correctly.
Warning  This sign gives
a message assuming possible human death or severe injury if the system is mishandled ignoring the message given with this sign. Caution
This sign gives a message assuming possible human injury or property damage if the system is mishandled ignoring the message given with this sign.
Warning
Continuing to use the system with unlikely
abnormalities such as smoke and abnormal smell and sound may cause fire and electric shock. After turning off the power of the system's main unit immediately, be sure to remove the power cable plug from the receptacle. After confirming that no more smoke is coming out, contact our sales office for a repair request. Do not attempt to repair the system by yourself, as it is dangerous for the user.
Should water or foreign materials enter the
system, after turning off the power of the system's main unit immediately, remove the power cable plug
from the receptacle, and then contact our sales office. Continuing to use the system with foreign materials inside may cause fire or electric shock.
If cables are damaged such as when the power cable is broken to disconnection and cores are exposed, contact our sales office for a repair. Otherwise, it may cause fire or electric shock. Do not use the system in a place where liquid may splash on the system's main unit directly.
Otherwise, it may cause fire or electric shock. Use the system only within the voltage range specified in the Instruction Manual. Otherwise, it may cause fire or electric shock.
Fully insert the power cable plug into the power receptacle. Otherwise, it may cause fire or electric shock.
Do not place heavy objects on the power cable. Also make sure that the power cable is not caught under the system. Otherwise, the cable may be damaged and cause fire or electric shock.
Do not place flower vases, cups, containers with water, or small metal items on the system. If water spills or enters the inside, fire or electric shock may be caused
Do not damage, process, bend forcefully, twist, pull, or heat the power cable, Otherwise, the cable may
be damaged and cause fire or electric shock.
Never disassemble, repair, or modify the main unit. Also, never remove the cover. Otherwise, it may cause fire or electric shock.
Caution
When disconnecting the power cable, do not pull the cable. Instead, be sure to hold the power plug to disconnect it. Otherwise, the cable may be damaged and fire or electric shock may be caused.
Before caring for the system, remove the power plug from the receptacle for the sake of safety. Otherwise, it may cause electric shock.
Before moving the system, turn off the power switch, and be sure to remove the power plug from the receptacle, and then remove the connection cords of the external devices.
Otherwise, cords may be damaged and fire or electric shock may be caused.
Do not place the power cable near heat
generating devices. This may melt the covering of cable and may cause fire or electric shock. When using the headphones, be careful not to turn the volume too high. Continuously hearing a sound so loud as to irritate your ears for a long time may affect your hearing adversely. Do not connect/disconnect the power plug with wet hands. Otherwise, it may cause electric shock.
Before turning on the power, turn the  volume to minimum. Otherwise, you will hear a loud sound suddenly, which may cause impairments such as a hearing loss.
Do not connect/disconnect the power plug with the power switch on. This may cause system malfunctions.
Do not connect/disconnect the module unit and the card unit with the power switch on. This may cause system malfunctions.
Do not put the module unit and the card unit in places where it is susceptible to static electricity (such as on a carpet), This may cause system malfunctions.
If the panel surface becomes dirty, wipe it off using a soft cloth immersed in a small amount of neutral detergent. Never use gasoline, alcohol, cleanser, or freon.
The module unit and the card unit were adjusted when installed.
Please know that if changes are made by the customer after delivery such as replacing parts or adjusting the internal trimmer, maintaining of the performance afterward cannot be guaranteed. Install NT880 on a flat surface with good
ventilation. Otherwise, the internal temperature may rise to cause system malfunctions.
Do not use in places where corrosive gas is generated. There is a possible cause of the
malfunction or failure.
Do not use, expose, or store batteries in
high-temperature locations such as direct sunlight
or in the car in the hot sun. There is a risk of
leakage, overheating, explosion, or fire of the
battery. Also, please do not throw in fire or heat. There is a danger of explosion if you replace the battery by mistake. Please exchange with the
same or equivalent type.
For protection from electric shock, please plug the power cable plug into an outlet with a protective ear
th terminal correctly connected to earth. Using it without connecting a protective earth may cause
electric shock.
Place it in a location that is easily accessible to the power plug. If you feel abnormal, immediately turn off the power and unplug the power plug from the outlet. Also, even when the power is turned off, a small current flows. Always unplug the power plug from the outlet when not using this product for a long time. When installing this equipment in
system, please construct a system that can be shut
off with a breaker or the like.
Disposing of this Equipment
When disposing this equipment, contact an authorized industrial waste disposal operator to handle the disposal since this equipment needs to be disposed as an industrial waste.
Copyright
Copyright © 2017 TAMURA Corporation. All Rights Reserved. Do not duplicate or replicate without permission.
About the latest version of instruction manual
Specifications and
appearance etc. described in this manual are subject to change without notice for improvement.
Please download the latest version instruction manual from the website of TAMURA Corporation.
About the latest firmware
The latest firmware of this device is published on the website of TAMURA Corporation.
Please download the latest firmware and installation instructions from the website of TAMURA Corporation.
TAMURA Corporation website jp
Since the consumable parts including faders, fans, and operating knobs tend to lose their effectiveness with frequency and time of use, replacement is needed according to consumption. We recommend carrying out a periodical maintenance. For repair or maintenance, consult with our sales representatives or service department shown on the end of this
manual. TAMURA owes no responsibility or liability for any failure due to improper use or alteration.

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。