齿轮基本术语(中英文对照)
齿轮Toothed gear；Gear
齿轮副Gear pair
平行轴齿轮副Gear pair with parallel axes
相交轴齿轮副Gear pair with intersecting axes  齿轮系Train of gears
行星齿轮系Planetary gear train
齿轮传动Gear drive；Gear transmission
配对齿轮Mating gears
小齿轮Pinion
大齿轮Wheel；Gear
主动齿轮Driving gear
从动齿轮Driven gear
行星齿轮Planet gear
行星架Planet carrier
太阳轮Sun gear
内齿圈Ring gear；Annulus gear
外齿轮External gear
内齿轮Internal gear
中心距Centre distance
轴交角Shaft angle
连心线Line of centres
减速齿轮副Speed reducing gear pair
增速齿轮副Speed increasing gear pair
齿数比Gear ratio
传动比Transmission ratio
轴平面Axial plane
基准平面Datum plane
节平面Pitch plane
端平面Transverse plane
法平面Normal plane
分度曲面Reference surface
节曲面Pitch surface
齿顶曲面Tip surface
齿根曲面Root surface
基本齿廓Basic tooth profile
基本齿条Basic rack
产形齿条Counterpart rack
产形齿轮Generating gear of a gear
产形齿面Generating flank
基准线Datum line
轮齿Gear teeth；Tooth
齿槽Tooth space
右旋齿Right-hand teeth
左旋齿Left-hand teeth
变位齿轮Gears with addendum modification；
X-gears
高度变位圆柱齿轮副X-gear pair with reference centre distance  角度变位圆柱齿轮副X-gear pair with modified centre distance  高度变位锥齿轮副X-gear pair without shaft angle modification  角度变位圆柱齿轮副X-gear pair with shaft angle modification  变位系数Modification coefficient
变位量Addendum modification
径向变位系数Addendum modification coefficient
中心距变位系数Centre distance modification coefficient
圆柱齿轮Cylindrical gear
顶圆Tip circle
根圆Root circle
齿距Pitch
齿距角Angular pitch
公法线长度Base tangent length
分度圆直径Reference diameter
节圆直径Pitch diameter
基圆直径Base diameter
顶圆直径Tip diameter
根圆直径Root diameter
齿根圆角半径Fillet radius
齿高Tooth depth
工作高度Working depth
齿顶高Addendum
齿根高Dedendum
弦齿高Chordal height
固定弦齿高Constant chord height
齿宽Facewidth
有效齿宽Effective facewidth
端面齿厚Transverse tooth thickness
法向齿厚Normal tooth thickness
端面基圆齿厚Transverse base thickness
法向基圆齿厚Normal base thickness
端面弦齿厚Transverse chordal tooth thickness
固定弦齿厚Constant chord
端面齿顶厚Crest width
法向齿顶厚Normal crest width
端面齿槽宽Transverse spacewidth
法向齿槽宽Normal spacewidth
齿厚半角Tooth thickness half angle
槽宽半角Spacewidth half angle
压力角Pressure angle
齿形角Nominal pressure angle
圆弧圆柱蜗杆Arc-contact worm；hollow flank worm；ZC-worm
直廓环面蜗杆Enveloping worm with straight line grneratrix；TA worm
平面蜗杆Planar worm wheel；P-worm wheel
平面包络环面蜗杆Planar double enveloping worm；TP-worm
平面二次包络蜗杆Planar double-enveloping worm wheel；TP-worm wheel
锥面包络环面蜗杆Toroid enveloping worm wheel；TK-worm wheel
渐开线包络环面蜗杆Toroid enveloping worm hich involute holicoid generatrix；TI-worm  锥蜗杆Spiroid
锥蜗轮Spiroid gear
锥蜗杆副Spiroid gear pair
中平面Mid-plane
长幅内摆线Prolate hypocycloid
短幅内摆线Curtate hypocycloid
渐开线Involute；
Involute to a circle
延伸渐开线Prolate involute
缩短渐开线Curtate involute
球面渐开线Spherical involute
渐开螺旋面Involute helicoid
阿基米德螺旋面Screw helicoid
球面渐开螺旋面Spherical involute helicoid
圆环面Toroid
圆环面的母圈Generant of the toroit
圆环面的中性圈Middle circle of the toroid
圆环面的中间平面Middle-plane of the toroid
圆环面的内圈Inner circle of the toroid
啮合干涉Meshing interference
切齿干涉Cutter interference
齿廓修型Profile modification；
Profile correction
修缘Tip relief
修根Root relief
齿向修形Axial modification；
Longitudinal correction
齿端修薄End relief
鼓形修整Crowning
鼓形齿Crowned teeth
挖根Undercut
瞬时轴Instantaneous axis
瞬时接触点Point of contact
瞬时接触线Line of contact
端面啮合线Transverse path of contact
啮合曲面Surface of action
啮合平面Plane of action
啮合区域Zone of action
总作用弧Total arc of transmission
端面作用弧Transverse arc of transmission  纵向作用弧Overlap arc
总作用角Total angle of transmission
端面作用角Transverse angle of transmission  纵向作用角Overlap angle
总重合度Total contact ratio
端面重合度Transverse ratio
纵向重合度Overlap ratio
标准齿轮Standard gears
非变位齿轮X-gero gear
标准中心距Referencr centre distance
名义中心距Nominal centre distance
分度圆柱面Reference cylinder
节圆柱面Pitch cylinder
基圆柱面Basic cylinder
齿顶圆柱面Tip cylinder
齿根圆柱面Root cylinder
节点Pitch point
节线Pitch line
分度圆Reference circle
节圆Pitch circle
基圆Basic circle
定位面Locating face
profile中文外锥距Outer cone distance
内锥距Inner cone distance
中点锥距Mean cone distance
背锥距Back cone distance
安装距Locating distance
轮冠距Tip distance；crown to back
冠顶距Apex to crown
偏置距Offset
齿线偏移量Offset of tooth trace
分锥角Reference cone angle
节锥角Pitch cone angle
顶锥角Tip angle
根锥角Root angle
背锥角Back cone angle
齿顶角Addendum angel
齿根角Dedendum angle
任意点压力角Pressure angle at a point
任意点螺旋角Spiral angle at a point
中点螺旋角Mean spiral angle
大端螺旋角Outer spiral angle
小端螺旋角Inner spiral angle
蜗杆Worm
蜗轮Worm wheel
蜗杆副Worm gear pair
圆柱蜗杆Cylindrical worm
圆柱蜗杆副Cylindrical worm pair
环面蜗杆Enveloping worm
环面蜗杆副Enveloping worm pair
阿基米德蜗杆Straight sided axial worm；ZA-worm
渐开线蜗杆Involute helicoid worm；ZI-worm
法向直廓蜗杆Straight sided normal worm；ZN-worm
锥面包络圆柱蜗杆Milled helicoid worm；ZK-worm
椭圆齿轮Elliptical gear
非圆齿轮副Non-circular gear pair
圆柱针轮副Cylindsical lantern pinion and wheel
针轮Cylindsical tan tein gear ；pin-wheel
谐波齿轮副Harmoric gear drive
波发生器Wave generator
柔性齿轮Flexspine
刚性齿轮Circular spline
非圆齿轮Non-circular gear
分度圆环面Reference tosoid
（注：专业文档是经验性极强的领域，无法思考和涵盖全面，素材和资料部分来自网络，供参考。可复制、编制，期待你的好评与关注）

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。