1-146
H
High CMR, High Speed TTL Compatible Optocouplers Technical Data
6N137HCNW137HCNW2601HCNW2611HCPL-0600HCPL-0601HCPL-0611HCPL-0630
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD.
Features
• 5 kV/µs Minimum Common Mode Rejection (CMR) at V CM = 50 V for HCPL-X601/X631, HCNW2601 and
10kV/µs Minimum CMR at V CM  = 1000 V for HCPL-X611/X661, HCNW2611• High Speed: 10 MBd Typical • LSTTL/TTL Compatible • Low Input Current Capability: 5 mA
• Guaranteed ac and dc
Performance over Temper-ature: -40°C to +85°C • Available in 8-Pin DIP,
SOIC-8, Widebody Packages • Strobable Output (Single Channel Products Only)• Safety Approval
UL Recognized - 2500 V rms for 1 minute and 5000V rms*for 1 minute per UL1577CSA Approved
VDE 0884 Approved with V IORM = 630 V peak for
HCPL-2611 Option 060 and V IORM =1414 V peak  for HCNW137/26X1BSI Certified
(HCNW137/26X1 Only)• MIL-STD-1772 Version Available (HCPL-56XX/66XX)
Functional Diagram
*5000 V rms/1 Minute rating is for HCNW137/26X1 and Option 020 (6N137, HCPL-2601/11/30/31, HCPL-4661) products only.HCPL-0631HCPL-0661HCPL-2601HCPL-2611HCPL-2630HCPL-2631HCPL-4661
Applications
• Isolated Line Receiver • Computer-Peripheral Interfaces
• Microprocessor System Interfaces
• Digital Isolation for A/D,D/A Conversion
• Switching Power Supply • Instrument Input/Output Isolation
• Ground Loop Elimination • Pulse Transformer Replacement
• Power Transistor Isolation in Motor Drives
• Isolation of High Speed Logic Systems
Description
The 6N137, HCPL-26XX/06XX/4661, HCNW137/26X1 are optically coupled gates that combine a GaAsP light emitting diode and an integrated high gain photo detector. An enable input allows the detector to be strobed.The output of the detector IC is
A 0.1 µF bypass capacitor must be connected between pins 5 and 8.
CATHODE
ANODE GND
V V CC O ANODE 2
CATHODE 2
CATHODE 1ANODE 1GND
V V CC O2V E V O16N137, HCPL-2601/2611 HCPL-0600/0601/0611 HCPL-2630/2631/4661 NC NC
LED ON OFF ON OFF ON OFF
ENABLE
H H L L NC NC
profile中文
OUTPUT
L H H H L H
TRUTH TABLE (POSITIVE LOGIC)LED ON OFF
OUTPUT
L H
TRUTH TABLE (POSITIVE LOGIC)5965-3594E
an open collector Schottky-clamped transistor. The internal shield provides a guaranteed common mode transient immunity specification of 5,000 V/µs for the HCPL-X601/X631 and HCNW2601, and 10,000 V/µs for the HCPL-X611/X661 and HCNW2611.This unique design provides
maximum ac and dc circuit
isolation while achieving TTL
compatibility. The optocoupler ac
and dc operational parameters
are guaranteed from -40°C to
+85°C allowing troublefree
system performance.
The 6N137, HCPL-26XX, HCPL-
06XX, HCPL-4661, HCNW137,
and HCNW26X1 are suitable for
high speed logic interfacing,
input/output buffering, as line
receivers in environments that
conventional line receivers
cannot tolerate and are recom-
mended for use in extremely high
ground or induced noise
environments.
Selection Guide
Notes:
1. Technical data are on separate HP publications.
2. 15 kV/µs with V CM = 1 kV can be achieved using HP application circuit.
3. Enable is available for single channel products only, except for HCPL-193X devices.
1-147
1-148
Ordering Information
Specify Part Number followed by Option Number (if desired).Example:
HCPL-2611#XXX
020 = 5000 V rms/1 minute UL Rating Option*060 = VDE 0884 V IORM  = 630 Vpeak Option**300 = Gull Wing Surface Mount Option†500 = Tape and Reel Packaging Option
Option data sheets available. Contact Hewlett-Packard sales representative or authorized distributor for information.
*For 6N137, HCPL-2601/11/30/31 and HCPL-4661 (8-pin DIP products) only.
**For HCPL-2611 only. Combination of Option 020 and Option 060 is not available.†Gull wing surface
mount option applies to through hole parts only.
Schematic
V F
USE OF A 0.1 µF BYPASS CAPACITOR CONNECTED
BETWEEN PINS 5 AND 8 IS RECOMMENDED (SEE NOTE 5).
V CC V O
GND
E
6N137, HCPL-2601/2611 HCPL-0600/0601/0611
V V CC V O1
V V O2
GND
HCPL-2630/2631/4661 HCPL-0630/0631/0661
+ 0.076
- 0.051
(0.010
+ 0.003)
- 0.002)
DIMENSIONS IN MILLIMETERS AND (INCHES).
*MARKING CODE LETTER FOR OPTION NUMBERS
"L" = OPTION 020
"V" = OPTION 060
OPTION NUMBERS 300 AND 500 NOT MARKED. Package Outline Drawings
8-pin DIP Package** (6N137, HCPL-2601/11/30/31, HCPL-4661)
8-pin DIP Package with Gull Wing Surface Mount Option 300
(6N137, HCPL-2601/11/30/31, HCPL-4661)
**JEDEC Registered Data (for 6N137 only).
(0.025 ± 0.005)
1.080 ± 0.320
MAX.
(0.100)
BSC
DIMENSIONS IN MILLIMETERS (INCHES).
LEAD COPLANARITY = 0.10 mm (0.004 INCHES).
+ 0.076
- 0.051
+ 0.003)
- 0.002)
1-149
1-150
Small-Outline SO-8 Package (HCPL-0600/01/11/30/31/61)
8-Pin Widebody DIP Package (HCNW137, HCNW2601/11)
(0.012)
MIN.DIMENSIONS IN MILLIMETERS (INCHES).
LEAD COPLANARITY = 0.10 mm (0.004 INCHES).
1.78 ± 0.15 + 0.076 - 0.0051+ 0.003) - 0.002)

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。