汉语意思英语名称
7：24锥柄立铣刀end mills with 7:24 taper shank
阿基米德螺旋线archimedes spiral
凹半圆铣刀concave milling cutters
百分表dial gauges
摆线trochoids
半径样板radials template
壁厚千分尺tube micrometers
变位齿轮x-gear
变位齿轮；gears with addendum modification
变位齿轮副x-gear pair
变位系数modification cofficient
标准齿轮standard gear/非变位齿轮X-zero gear
标准中心距reference centre distance
不对称双角铣刀double unequal-angle cutters
槽宽spacewidth
槽宽半角spacewidth half angle
长幅外摆线prolate epicycloid
尺寸dimension
齿槽tooth space
齿顶高addendum
齿顶圆tip circle
齿顶圆柱面tip cylinder
齿端修薄end relief
齿根高dedendum
齿根过渡曲面fillet
齿根圆root circle
齿根圆角半径fillet radius
齿根圆柱面root cylinder
齿厚tooth thickness
齿厚半角tooth thickness half angle
齿厚游标卡尺gear tooth vernier callipers
齿距pitch
齿距角angular pitch
齿宽 facewidth
齿廓tooth profile
齿廓修形profile modification/profile correetion
齿轮toothed gear;    gear
齿轮的变位addendum modification
齿轮的啮合engagement of gear
齿轮副gear pair
齿轮系gear train /train of gear
齿轮折断breakage
齿面tooth flank
齿面的接触contact of tooth flanks
齿面疲劳surface fatigue
齿全高tooth depth
齿数number of teeth
齿数比gear ratio
齿条rack
齿向修形axial modification/longitudinal correction
齿形角nomial pressure angle（端面压力角transverse pressure angle）传动比transmission ratio
从动齿轮driven gear
粗齿锯片铣刀metal slotting saws with coarse teeth
错齿三面刃铣刀side and face milling cutter with double alternate helix
大齿轮wheel,gear
大量程百分表long range dial gauge
大外径千分尺large micrometers
带表卡尺dail callipers
单角铣刀single angle cutter
当量齿数virtual number of teeth/equivalent number of teeth
刀口形直尺straight edge
导程lead
导程角lead angle
导程角lead angle
顶隙bottom clearance（侧隙backlash）
profile中文意思
顶圆直径tip diameter
端面齿槽宽transverse spacewidth
端面齿顶厚crest width
端面齿厚transverse tooth thickness
端面齿距transverse pitch
端面齿廓transverse profile
端面基节transverse base pitch
端面基圆齿厚transverse base thickness
端面径节transverse diametral  pitch
端面模数transverse module
端面啮合线path of contact/transverse path of contact
端面弦齿厚transverse chordal tooth thickness
端面重合度transverse contact ratio
端平面transverse plane
短幅外摆线curtate epicycloid
对称双角铣刀double equal-angle cutters
法平面normal plane
法线nomal
法向侧隙normal backlash
法向齿槽宽norminal spacewidth
法向齿顶厚normal crest width
法向齿厚normal tooth thickness
法向齿距normal pitch
法向齿廓normal profile
法向基节normal base pitch/端面基节transverse base pitch
法向基圆齿厚normal base thickness
法向径节normal diametral  pitch
法向模数normal module
法向弦齿厚normal chordal tooth thickness
非变位齿轮副x-zero gear pair
分度圆reference circal
分度圆柱面reference cylinder
分圆直径reference diameter
杠杆百分表dial test indicator
杠杆千分表dial test indicator
杠杆千分尺indicating micrometers
高度变位齿轮副gear pair with reference centre distance
高度游标卡尺height vernier callipers
高速钢车刀条high speed steel tool bits
根圆直径root diameter
工作齿面working flank/非工作齿面non-working flank
公差tolerance
公法线长度base tangent length
公法线千分尺gear tooth  micrometers
共轭齿廓conjugate profile
鼓形齿crowed teeth
鼓形修整crowing
固定弦齿高constant chordal height
固定弦齿厚constant width
基本齿条basic rack
基本齿形basic rack tooth profile
基圆base circle
基圆导程角base lead angle
基圆螺旋角base helix angle
基圆直径base diameter
基圆柱面base cylinder
基准线datum line
尖齿槽铣刀flat relieved tooth slotting cutters
尖头千分尺point micrometers
检验verification
渐开螺旋面involute helicoid
渐开线involute
渐开线圆柱齿轮involute cylindrical gear
渐开线圆柱齿轮involute cylindrical gear
渐开线圆柱面involute cylinder
渐开线直齿渐开线花键量规gauge for straight cylindrical involute splines
交错轴齿轮副gear pair with non-parallel non-intersecting axes
胶合scoring
角度angle
角度变位圆柱齿轮gear pair with modifid centre distance
角度铣刀angle cutters
节点pitch point
节线pitch line
节圆pitch circle
节圆直径pitch diameter
节圆柱面pitch cylinder
径节diametral pitch
径向变位量addendum modification(for external gear)/dedendum modification（for internal gears）径向变位系数addendum modification coefficient
径向侧隙radial  backlash
矩形花键straight-side  spline
可转位车刀turning tool with indexable insert
可转位立铣刀end milling cutters with indexable insert
可转位面铣刀facemilling cutters with  indexable inserts
可转位三面立铣刀side and facemilling cutters with indexable inserts
立铣刀技术条件end mills technical specifications
连心线line of centres
量块gauge blocks
轮齿gear teeth
轮齿表面tooth surface
轮齿的干涉interference of flank
螺纹铣刀screw slotting milling cutters
螺纹样板screw thread template
螺旋helix
螺旋角helix angle（for cylindrical gear），spiral angle（for bevel and hypoid gears）螺旋角helix angle
螺旋线helix and sprials
螺旋线helix
名义中心距nominal centre distance
模具铣刀die sinking end mills
模数module
模数module
磨损wear
莫氏锥柄T形槽铣刀T-slot cutter with morse taper shank
莫氏锥柄立铣刀end mills with morse taper shank
莫氏锥柄圆柱形球头立铣刀cylindrical ball end mills with morse taper shank
莫氏锥柄圆锥形立铣刀tapered end mills with morse taper shank
内齿轮internal gear
内齿轮副internal gear pair
内齿圈ring gear/annulus gear
内径百分表dial borre gauges
内径千分尺internal micrometers
啮合engagement/mesh
啮合干涉meshing interference
啮合角working pressure angle
啮合平面place of action
啮合区域zone of action
啮合曲面surface of action
配对齿轮mating gear
平行轴齿轮副gear pair with parallel axes
普通螺纹量规gauge for general purpose screw threads
千分表dial indicators
切齿干涉cutter interference
人字齿轮douole-helical gear
任意点的端面压力角transverse pressure angle at a point at a point
任意点的法向压力角nominal pressure angle at a point
塞尺feeler gauges
三爪内径千分尺three point internal micrometers
深度游标卡尺depth vernier callipers
瞬时接触点point of contact
瞬时接触线line of contact
塑性变形plastic deformation
缩短渐开线curtate involute
太阳轮sun gear
套式立铣刀shell end mills
同侧齿面corresponding flanks
头数number of  threads/number of starts
凸半圆铣刀convex milling cutters
挖根undercut
外摆线epicycloid
外齿轮external gear
外齿轮副external gear pair
外径千分尺micrometers
外形、轮廓、侧面profile
万能角度尺universal bevel protractor
蜗杆worm wheel
细齿锯片铣刀metal slotting saws with fine teeth
弦齿高chordal height
相交轴齿轮副gear pair with intersecting axes
相啮齿面mating flank
镶齿三面刃铣刀inserted blade side milling cutters
镶齿套式三面刃铣刀inserted blade face milling cutters
削平型直柄立铣刀end mills with flatted parallel shank
小齿轮pinion
斜齿齿轮的当量齿轮virtual gear/virtual spur gear
斜齿条helical rack
斜齿圆柱齿轮helical gear/single-helical gear
斜齿圆柱齿轮副helical gear pair
行星齿轮planet gear
修根root rilief
修缘tip rilief
压力角pressure angle（法向压力角normal pressure angle）延伸渐开线prolate involute
异侧齿面opposite flanks
游标卡尺vernier callipers
有效齿宽effective facewidth
有效齿面active flank
右侧面righ flank
右旋齿right-hand teeth/左旋齿left-hand teeth
圆的渐开线involute to a circle
圆角铣刀corner-rounding cutters
圆周侧隙circumferential backlash
圆柱齿轮cylindrical gear
圆柱齿轮副cylindrical gear pair
圆柱螺旋线circular helix/helix
圆柱形铣刀cylindrical cutters
圆锥螺旋线conical spiral
正弦规sine bars
直柄T槽铣刀T-slot cutter with parallel shank
直柄立铣刀end millls with parallel shank
直柄圆柱形球头立铣刀cylindrical ball end mills with parallel shank
直柄圆锥形立铣刀tapered end mills with parallel shank
直柄圆锥形球头立铣刀tapered ball end mills with parallel shank
直齿三面刃铣刀side and face milling cutter with straight teeth
直齿条spur rack
直齿圆柱齿轮spur gear
直齿圆柱齿轮副spur gear pair
中心距centre distance
重合度contact  ratio and overlap ratio
轴交角shaft angle
轴向齿距axial pitch
轴向齿廓axial profile
轴向径节axial diametral pitch
轴向模数axial module
主动齿轮driving gear
锥齿轮bevel gear
总重合度total contact ratio
纵向重合度overlap ratio
左侧面left flank
硬质合金错齿三面刃铣刀side and face milling cutters with double alternate helical teeth with carbide tip 直柄短麻花钻stub parallel shank twist drills
锥柄麻花钻taper shank twist drills
锥柄长麻花钻long taper shank twist drills
锥柄加长麻花钻lengthened taper shank twist drills
粗锥柄麻花钻twist drills with oversize taper shank
中心钻center drills
扩孔钻core drills
锥柄扩孔钻core drills with morse taper shanks
套式扩孔钻shell drills
直柄扩孔钻core drills with parallel shanks
60锥柄锥面锪钻countersinks with morse taper shanks for angle 60
锥面锪钻countersinks
带导柱直柄平底锪钻counterbores with parallel shanks and solid pilots
带可换导柱直柄平底锪钻counterbores with morse taper shanks and detachable pilots
平底锪钻counterbores
带导柱直柄90锥面锪钻90 countersinks with parallel shanks and detachable pilots
带可换导柱直柄90锥面锪钻90 countersinks with morse taper shanks and detachable pilots
锪钻用可换导柱detachable pilots for use with counterbores and countersinks
手用铰刀hand reamer
直柄机用铰刀machine reamer with parallel shanks
锥柄机用铰刀machine reamer with morse taper shanks
带刃倾角的锥柄机用铰刀machine reamers with inclination morse taper shanks
套式机用铰刀shell machine reamers
硬质合金直柄机用铰刀machine reamers with parallel shanks with carbide tips
硬质合金锥柄机用铰刀machine reamers with morse taper shanks with carbide tips
机用丝锥machine taps
滚丝轮thread rolling cylindrical dies
搓丝板thread rolling flat dies
螺旋槽丝锥machine taps with  screw flutes
圆拉刀round broaches
渐开线花键拉刀broaches for involute spline
齿轮滚刀gear hobs
磨前齿轮滚刀pre-grinding bobs
直齿插齿刀spur shaper cutters
渐开线花键滚刀involute splines hobs
斜齿插刀helical gear shaper cutter
滚刀所用词语
外径outerside diameter
容屑槽flute
孔径bore diameter
刃部tooth
前刀面cutting face
铲背量cam rise
齿槽深flute depth
键槽keyway
顶刃top edge
左侧刃left edge
螺旋线thread helix

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。