Code Description
−2147467263 Not implemented.
−2147467260 Operation aborted.
−2147024809 One or more arguments are invalid.
−1967390712 Cannot resolve name to a network address.
−1967390711 Network operation timed out.
−1967390703 Could not resolve service to a port address.
−1967390702 Timed out while trying to connect to peer.
−1967390686 Computer name is not present in the URL.
−1967390685 Computer name starts with a non-alphabetic character.
−1967390684 Computer name contains an invalid character.
−1967390683 Process name is not present in the URL.
−1967390682 Process name contains an invalid character.
−1967390681 Point or tag name is not present in the URL.
−1967390680 Point or tag name contains an invalid character.
−1967390672 Empty component in point or tag name.
−1967390668 Thread initiation failed.
−1967390464 URL does not start with two slashes.
−1967390463 URL starts with more than two slashes.
−1967390462 URL contains two consecutive delimiters.
−1967390460 Unbalanced quotation marks in URL.
53 Manager call not supported.
54 The network address is ill-formed. Make sure the address is in a valid format. For TCP/IP, the address can be either a machine name or an IP address in the x.xxx. If this error occurs when specifying a machine name, make sure the machine name is valid. Try to ping the machine name. Check that you have a DNS server properly configured.
55 The network operation is in progress.
56 The network operation exceeded the user-specified or system time limit.
57 The network connection is busy.
58 The network function is not supported by the system.
59 The network is down, unreachable, or has been reset.
60 The specified network address is currently in use.
61 The system could not allocate the necessary memory.
62 The system caused the network connection to be aborted.
63 The network connection was refused by the server. For TCP/IP, make sure the server is running and listening on the port you are trying to use. Firewalls can also cause a server to refuse a connection. For VI Server, make sure you have enabled VI Server from Tools»Options»VI Server:Configuration.
64 The network connection is not yet established.
65 The network connection is already established.
66 The network connection was closed by the peer. If you are using the Open VI Reference function on a remote VI Server connection, verify that the machine is allowed access by selecting Tools»Options»VI Server:Machine Access on the server side.
108 Singlecast connections cannot send to multicast addresses.
109 Multicast connections cannot send to singlecast addresses.
110 Specified IP address is not in multicast address range.
111 Cannot write to read-only multicast connection.
112 Cannot read from write-only multicast connection.
113 A message sent on a datagram socket was larger than the internal message buffer or some other network limit, or the buffer used to recei
ve a datagram was smaller than the datagram itself.
119 Illegal combination of Bluetooth discoverable and non-connectable modes. A discoverable Bluetooth system is connectable, and non-connectable Bluetooth system is non-discoverable. The combination of discoverable and non-connectable is illegal.
120 Error setting Bluetooth mode. Unknown internal error encountered while setting Bluetooth mode.
121 Invalid GUID string. The GUID string has an invalid format. An example of the correct format is: B62C4E8D-62CC-404b-BBBF-BF3E3BBB1374.
1101 Insufficient privileges to read, write, or create an item in the DataSocket Server. Use the DataSocket Server Manager to configure these privileges.
1114 This item is read-only. You must connect in read mode.
1115 This item is write-only. You must connect in write mode.
1132 Busy with another operation.
1133 LabVIEW is busy connecting.
1134 A different read operation is in progress.
server error啥意思1139 A DataSocket item name cannot contain certain characters. This error occurs if the DataSocket item name contains "/", "\", "?", "=", or "&".
1140 Exceeded maximum DataSocket item count. Use the DataSocket Server Manager to change the maximum number of dynamically created items the data server will allow.
1141 Exceeded maximum data item connection count. Use the DataSocket Server Manager to change the maximum number of connections the data server will allow.
1142 Multiple writers are not allowed.
1143 Cannot load dataskt.llb.
1178 LabVIEW reached end of file.
1179 Access mode not supported for operation.
1180 Pending operation in progress.
1181 Protocol not recognized by LabVIEW. You must use a valid URL to establish a data connection.
1182 Error parsing URL.
1183 LabVIEW: Synchronous operation not supported for connection. Append "?sync=true" to URL to enable synchronous operations with the PSP protocol. LabVIEW 8.0.1 and later support synchronous operations.
1184 Path not found, FTP login incorrect, or no FTP write permission.
1185 OPC item not found.
1337 Not enough memory to complete this remote panel operation.
1338 Network type not supported by remote panel protocol.
1339 Remote panel connection is closed.
1340 Invalid server IP address. Contact the server administrator to get the correct IP address or name of the computer to which you want to connect.
1341 Remote panel connection refused by the specified server. The server administrator must enable the LabVIEW Web Server. Verify that the Server IP Address and Port you entered in the Connect to Remote Panel dialog box are correct.
1342 Remote panel connection exceeds maximum number of licenses. The server administrator must upgrade the remote front panel license to allow more client connections.
1343 Client does not have access to remote panel server.
1344 The remote panel protocol version is incompatible. The client and server computers must be running the same version of LabVIEW. If you are using a browser to view and control a remote front pane
l, you must use a version of the LabVIEW Run-Time Engine compatible with the version of LabVIEW on the server computer. Also, be sure and contact the server administrator and have them make sure t
hat the HTML document specifies the correct version of the LabVIEW Run-Time Engine.
1345 The LabVIEW client version is incompatible with the LabVIEW server version. Make sure you entered the IP address or computer name of the server correctly.
1346 Server does not support remote panels.
1347 You cannot connect to the local LabVIEW application.
1348 Remote panel server failed to send the requested VI. A memory or network problem occurred. This error might occur if you try to connect to a large front panel. Try to connect to the front panel again, or request that the server administrator modify the front panel so it uses less memory.
1349 Client does not have access to specified VI. The server administrator must specify the VIs that clients can view or control.
1350 Requested VI is broken and cannot be viewed or controlled.
1351 Requested VI is not a standard VI. You cannot view or control a polymorphic VI, custom control, or global variable VI remotely.
1352 Requested VI is not loaded into memory on the server computer.
1353 Requested VI is not in run mode.
1354 VI name required.
1355 Fatal error occurred during operation, closing connection.
1356 A remote panel connection does not exist for the specified VI.
1369 Removing data connection from this control.
1383 The data type of the data read does not match the data type of the type input.

版权声明:本站内容均来自互联网,仅供演示用,请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198,我们将在24小时内删除。