光盘启动
1.放入操作系统介质光盘的第一张光盘到光驱中。
2.确认外围硬件设备连接好，已经加电， (such as CD-ROM drives, tape drives, DVD drives, and terminals) are turned on。
3.Power on 系统
4.当系统 beeps twice, 按 F5 on the keyboard (or 5 on an ASCII terminal)，系统会从默认的引导设备启动。
5.按F1 选择console(or 1 on an ASCII terminal) and press Enter。
6.按1选择安装语言为English。
7.选择第2项，修改安装设置，如下图
Step 3. 安装选项设置
1.In the Installation and Settings screen, verify the installation settings are correct by checking the method of installation (new and complete overwrite), the disk or disks you want to install, the primary language environment settings, and the more options menu. If the default choices are correct, type 0 and press Enter to begin the BOS installation. The system automatically reboots after installation is complete. Go to step 4. Otherwise, go to sub-step 2.
aix系统netstat命令详解2.To change the System Settings, which includes the method of installation and disk where you want to install, type 1 in the Choice field and press Enter.

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。