常用中英文尺寸对照表——
下腳全長至第一勾圈  Base length total band incl 1st hook /  Underbust up to 1st hook /  Underband 1st hook to 1st eye /  Chest underbust length(from hook to first eye) /  Total length to 1st hook & eye /  Finished base (to C.B. raw edge)
下腳長不計扣  Bottom band excl. fasteners
下腳長至第一勾圈放鬆度  Bottom rlx. F. hook to first eye /  Underband relaxed (hook to 1st set eyes)
下腳長從到尾  Chest relaxed edge to edge
下腳全長(不連勾圈)  Total base(inside edges of hook & eyes) /  Under chest length
下腳全長至第一勾圈拉度  Base length strung incl 1st hook /  Underband extended (hook to 1st set of eyes)
下腳脾位長  Back base length band /  Half back /  Bottom wing from side /  Bottom of wi
ng
下腳脾位長不連勾圈  Base of backs(inside edge of hook&eyes)
下脾長拉度  Bottom wing stretch
雞心闊連鋼支  Width between cups incl. wires
上雞心闊  Top gore width /  Centre front width /  Top of CF /  Gradle width (at top) /  Topline of centre front /  Centre front at top
上雞心闊連鋼支  Between wires at top including casing
雞心頂闊(不包鋼支)()  Top yoke width (upper)
上雞心至杯邊距(雞心放落位置)  Drop at centre front
下雞心闊  Bottom gore width /  Bottom centre width /  Bottom of CF /  Base of centre front
雞心底闊(不包鋼支)()  Bottom yoke width (lower)
雞心(CF)  Gore height
雞心高(不包丈巾度)  Centre front height (excl. band) /  Centre front depth /  Length at front /  Gap heigth /  Gradle high
杯邊長連/不連綑碗  Neckline length-incl./excl. wire
杯邊長連鋼支  Neckline edge including wire /  Cup topline(incl channelling)
杯邊長不連鋼支  Finished topline(excl. C.F. wire casing) /  Top cup edge (excl wire casing)
上碗邊長  Upper cup length /  Top cup edge width /  Cup side length /  Upper cup edge /  Apex to centre front
杯闊(不連鋼支)  Cup width (excl. wire) /  Horizontal cup (excl, wire)
上杯高  Upper cup height /  Upper vertical cup /  Top cup depth / height
下杯高  Lower cup height /  Lower vertical cup /  Bottom cup depth / height /  Undercup height
杯高(夾碗骨長)/不連綑碗  Front cup depth-incl./excl. wire
杯高  Cup (seam) height
杯高  Overcup
杯高不邊綑碗  Vertical cup excl. wire
杯骨長  Cup seam length /  Cup width at seam /  Over bust seam /  Seam cup width /  Across cup on seam
杯骨長不連鋼支  Over cup seam width (excl. wire casing)
杯骨長連鋼支  Cup depth on seam including wire
杯扎長  Dart length
三角杯高  Cup triangle high
拉上脾長連/不連綑碗  Armhole length-incl./excl. wire
拉上脾全長不連勾圈  Total underarm & back topline (from cup apex to inside edge on hook & eye) /  Finished u/arm + back (excl. hook & eye)
拉上脾長不計丈巾  Top wing not incl. Strap
拉上脾長連捆  Top of wing (incl. Binding)
上脾長連綑碗  Under arm wire to centre back
上脾長(鋼支至搭帶位)  Wire seam to back strap
夾位長  Underarm cup side length /  Arm edge length /  Apex to wire
夾位長連綑碗  Underarm to wire
側脾高  Side height /  Length at sideseam /  Side depth /  Side height under arm /  Win
g height
側脾高(靠鋼支位度
駁脾高(沿鋼支位度),不計丈巾牙)  Around wire to wing join (not incl. Elastic scallope)
前肩帶長  Front shoulder strap length
前肩帶長(成品)(布部分)  Front strap length (finished) (fabric part)
後肩帶長7cm回帶後  Back shoulder strap elastic length w/7cm loop
後肩帶長(stretch什么意思中文成品)  Back strap length (finished)
花邊肩帶長(成品)  Shoulder strap (lace)
肩帶全長(拉盡扣成品)  Shoulder strap (full length)
肩帶成品長  Elastic strap max. length
肩帶長不計5cm回帶  Strap length with 5cm adjustment
肩帶長包5cm回帶  Elastic strap (finish between ring & slider 5cm)
後肩帶落帶距  Distance between strap & hook /  Back strap to centre back
前肩帶落帶距  Distance between strap & wire
後帶距(不連肩帶及勾圈)  Back strap position (excl. hook & eye)
搭帶成品長(不包勾圈)  Apex to back strap
半月紗長連鋼支  Half moon lining length incl. wire
下雞心至脾位距(沿鋼支度)  Around exposed wire from bottom of CF to wing join
勾圈闊  Hook band heigth /  Hook & eye tape
肩帶闊  Elastic strap width
鋼圈套長”外度”邊至邊  Channel length at outer edge
鋼圈套長  Around wire
鋼圈套長打棗至打棗  Around wire bar tack to bar tack
鋼圈套長(每邊0.5CM虛位)  Length around wire casiing(wire play 0.5CM each side)
鋼支虛位  Wire play
鋼支型號  Wire reference
鋼支長  Wire length
鋼支闊  Cups width
膠片闊  Rubber widths
圈扣闊  S/Strap rubber width
捌扣上圈闊  Top wing rubber
捌扣下圈闊  Bottom wing rubber

版权声明:本站内容均来自互联网,仅供演示用,请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198,我们将在24小时内删除。