与仪器有关的英语单词
    ## Instrument-Related Vocabulary.
    Calibration: The process of adjusting an instrument to ensure that it provides accurate measurements.
    Accuracy: The degree to which an instrument's measurements agree with the true value being measured.
    Precision: The degree to which an instrument's measurements are consistent with each other.
    Resolution: The smallest change in the measurand that can be detected by an instrument.
    Range: The limits within which an instrument can make measurements.
    Sensitivity: The ability of an instrument to detect small changes in the measurand.
    Selectivity: The ability of an instrument to distinguish between different measurands.
    Stability: The ability of an instrument to maintain its calibration over time.
    Reliability: The ability of an instrument to provide consistent measurements under different conditions.
    Linearity: The degree to which an instrument's response to the measurand is linear.
    Drift: A gradual change in an instrument's calibration over time.
    Offset: A constant error in an instrument's measurements.
    Hysteresis: A difference between an instrument's measurements when the measurand is increasing compared to when it is decreasing.
    Noise: Unwanted random fluctuations in an instrument's measurements.
    Bandwidth: The range of frequencies over which an instrument can make measurements.
    Gain: The ratio of the instrument's output signal to its input signal.
    Phase: The time delay between an instrument's input and output signals.
    Impedance: A measure of the resistance to the flow of alternating current.
    Capacitance: The ability of a device to store electrical charge.
    Inductance: The ability of a device to store magnetic energy.
    ## 仪器相关单词。
    校准: 调整仪器以确保其提供准确测量值的过程。
    准确度: 仪器测量值与被测量真值的吻合程度。
    精密度: 仪器测量值相互一致的程度。
    分辨率: 仪器能够检测到的被测量值的最小变化。
    量程: 仪器进行测量值的极限。
    灵敏度: 仪器检测被测量值小变化的能力。
    选择性: 仪器区分不同被测量值的能力。
    稳定性: 仪器在一段时间内保持其校准能力。
    可靠性: 仪器在不同条件下提供一致测量值的能力。
    线性: 仪器对被测量值的响应的线性程度。
    漂移: 仪器的校准随时间逐渐变化。
    偏移: 仪器测量值中的恒定误差。
    滞后: 当被测量值增加与减少时，仪器测量值之间的差异。
instrument的复数
    噪声: 仪器测量值中不必要的随机波动。
    带宽: 仪器进行测量值的频率范围。
    增益: 仪器输出信号与输入信号的比值。
    相位: 仪器输入和输出信号之间的时间延迟。
    阻抗: 交流电流动阻力的度量。
    电容: 器件存储电荷的能力。
    电感: 器件存储磁能的能力。

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。