使用双组份背胶贴墙面瓷砖的流程
英文版
Step 1: Preparation
Clean the wall surface thoroughly to remove any dirt, dust or debris.
Level the surface if necessary.
Mark the desired placement of the tiles on the wall.
Step 2: Mixing the Adhesive
Combine the two components of the dual-component adhesive according to the manufacturer's instructions.
Mix thoroughly until a uniform paste is formed.
Step 3: Applying the Adhesive
Use a notched trowel to apply the adhesive to the back of each tile.
The thickness of the adhesive should be consistent with the manufacturer's recommendations.
Spread the adhesive evenly, ensuring that all areas are covered.
Step 4: Setting the Tiles
Place the tiles on the wall according to the marked placement.
Press the tiles firmly into the adhesive to ensure good contact.
Use spacers between the tiles to maintain uniform spacing.
Step 5: Cleaning and Grouting
Once the tiles are set, remove any excess adhesive from the surface.
Grout the joints between the tiles using a suitable grout mixture.
Clean the tile surface thoroughly to remove any remaining residue.
完整的中文翻译
使用双组份背胶贴墙面瓷砖的流程
步骤 1：准备
彻底清洁墙面，去除任何污垢、灰尘或碎屑。
必要时将表面平。
在墙上标记瓷砖的理想摆放位置。
步骤 2：搅拌胶粘剂
根据制造商的说明，将双组份胶粘剂的两个成分混合。
彻底搅拌，直至形成均匀的糊状物。
步骤 3：涂抹胶粘剂
使用带齿抹刀将胶粘剂涂抹到每块瓷砖的背面。
胶粘剂的厚度应与制造商的建议一致。
均匀地涂抹胶粘剂，确保所有区域都覆盖。
步骤 4：粘贴瓷砖
根据标记好的位置将瓷砖粘贴到墙上。
用力将瓷砖压入到胶粘剂中，确保接触良好。3tiles
在瓷砖之间使用垫片以保持均匀的间距。
步骤 5：清洁和勾缝
瓷砖粘贴完成后，去除表面多余的胶粘剂。
使用合适的勾缝剂对瓷砖之间的缝隙进行勾缝。
彻底清洁瓷砖表面，去除任何剩余的残留物。

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。