DuPont ™ Zytel ®
HTN
high performance polyamide resin
PRELIMINARY DATA
Zytel ®
HTNFR52G30NH NC010
Value DAM
Identification  Part Marking Code ISO 11469>PA6T/66-GF30FR(40)<
Part Marking Code SAE J1344
>PPA-GF30FR<
Mechanical  Stress at Break ISO 527MPa  (kpsi)
30
150  (22) Strain at Break ISO 527%  2.2 Tensile Modulus ISO 527MPa  (kpsi)10500  (1520) Flexural Modulus ISO 178MPa  (kpsi)9000  (1300) Flexural Strength
ISO 178MPa  (kpsi)230  (35)
Notched Charpy Impact Strength ISO 179/1eA
kJ/m 2
8
Thermal
Deflection Temperature ISO 75-1/-2
°C  (°F)
1.80MPa
282  (540)
Melting Temperature ISO 11357-1/-3
°C  (°F)
10°C/min, First Heat
310  (590)
Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc.ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm.  Test temperatures are 23°C unless otherwise stated.
The above data are preliminary and are subject to change as additional data are developed on subsequent lots.
The DuPont Oval Logo, DuPont™, The miracles of science™ and Zytel® are trademarks or registered trademarks of DuPont Company. Copyright© 2006.
060725/060725
The information provided in this data sheet corresponds to our knowledge on the subject at the date of
its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated; these data may not be valid for such material used in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwise.  The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability of a specific material for your particular purposes. Since DuPont cannot anticipate all variations in actual end-use conditions DuPont makes no warranties and assumes no liability in connection with any use of this information. Nothing in this publication is to be considered as a
license to operate under or a recommendation to infringe any patent rights.  DuPont advises you to seek independent counsel for a freedom to practice opinion on the intended application or end-use of our products.  Caution:  Do not use this product in medical applications involving implantation in the human body. For other medical applications see "DuPont Medical Caution Statement", H-50102.
plastics.dupont
Zytel ® HTNFR52G30NH NC010 is a 30% glass reinforced, flame retardant, lubricated high performance polyamide resin. It is also a PPA resin and is halogen-free.
Property
Test Method
Units
During molding, use proper protective equipment and adequate ventilation. Avoid exposure to fumes and limit the hold up time and temperature of the resin in the machine. Purge degraded resin carefully with HDPE.
Zytel ®
HTNFR52G30NH NC010
Value DAM
Electrical  Surface Resistivity IEC 60093ohm >1E15 Volume Resistivity IEC 60093ohm m >1E13 Electric Strength IEC 60243-1kV/mm  (V/mil)
2.0mm
26.0  (655)
Dielectric Constant ASTM D 2520 B
1 GHz    3.7  10 GHz    3.8
Dissipation Factor ASTM D 2520 B
E-4
1 GHz 110  10 GHz 100
CTI IEC 60112V
600
Flammability
Flammability Classification UL94
0.4mm V-0
Oxygen Index
ISO 4589-1/-2%37
Glow Wire Flammability Index IEC 60695-2-12°C
0.75mm
960
Glow Wire Ignition Temperature IEC 60695-2-13
°C
0.75mm 725
Other  Density
ISO 1183kg/m 3  (g/cm 3)
1440  (1.44)
Molding Shrinkage ISO 294-4
%
Normal, 2.0mm    1.0  Parallel, 2.0mm
0.3Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc.ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm.  Test temperatures are 23°C unless otherwise stated.
The above data are preliminary and are subject to change as additional data are developed on subsequent lots.
The DuPont Oval Logo, DuPont™, The miracles of science™ and Zytel® are trademarks or registered trademarks of DuPont Company. Copyright© 2006.
060725/060725
The information provided in this data sheet corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated; these data may not be valid for such material used in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwise.  The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability of a specific material for your particular purposes. Since DuPont cannot anticipate all variations in actual end-use conditions DuPont makes no warranties and assumes no liability in connection with any use of this information. Nothing in this publication is to be considered as a
license to operate under or a recommendation to infringe any patent rights.  DuPont advises you to seek independent counsel for a freedom to practice opinion on the intended application or end-use of our products.  Caution:  Do not use this product in medical applications involving implantation in the human body. For other medical applications see "DuPont Medical Caution Statement", H-50102.
plastics.dupont
Property
Test Method Units
Zytel ®
HTNFR52G30NH NC010
Value
DAM Processing
Melt Temperature Range  °C  (°F)320-330  (610-625) Mold Temperature Range  °C  (°F)85-130  (185-265)
Drying Time, Dehumidified Dryer h 6-8 Drying Temperature  °C  (°F)100  (210) Air Dew Point
°C  (°F)<-20  (<-4) Processing Moisture Content
%
<0.10
Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc.ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm.  Test temperatures are 23°C unless otherwise stated.
The above data are preliminary and are subject to change as additional data are developed on subsequent lots.
The DuPont Oval Logo, DuPont™, The miracles of science™ and Zytel® are trademarks or registered trademarks of DuPont Company. Copyright© 2006.
060725/060725
The information provided in this data sheet corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated; these data may not be valid for such material used in combination
with any other materials, additives or pigments or in any process, unless expressly indicated otherwise.  The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability of a specific material for your particular purposes. Since DuPont cannot anticipate all variations in actual end-use conditions DuPont makes no warranties and assumes no liability in connection with any use of this information. Nothing in this publication is to be considered as a
license to operate under or a recommendation to infringe any patent rights.  DuPont advises you to seek independent counsel for a freedom to practice opinion on the intended application or end-use of our products.  Caution:  Do not use this product in medical applications involving implantation in the human body. For other medical applications see "DuPont Medical Caution Statement", H-50102.
plastics.dupont
Property
Test Method Units

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。