墨盒问题（Cartridge problem）
Continuous ink printer utility fault solution
The reason why the use of continuous ink are all for one reason - to save money. The fact is not false, the use of continuous ink can reduce the cost of supplies. But the use of continuous ink system also brings a lot of trouble for the users. The author will solve some CISS fault experience out to share with you, so that in the event of failure after timely treatment.
To construct a continuous ink supply system
printformUse the principle of continuous ink is through the catheter to the ink bottle and the ink tank, the pressure will Everfount ink poured into the cartridge and printing. In accordance with the classification structure, mainly composed of three parts of continuous ink supply system, respectively is the print cartridge, the ink bottle and the ink conduit. The print cartridge is the original cartridge. In order to ensure the printing quality and reduce the failure, usually continuous ink will be converted into the original cartridge carrier print.
The print cartridge: the original cartridge containing a sponge, can get good filtering effect of impurities c
ontained in the ink, the ink absorbent sponge fault but also easy to cause the breakage of print. Now the market also appeared in the non sponge cartridge modification. This type of ink cartridge although no sponge, not prone to fault disconnection, but the filter filter area is small, the filtration of impurity is poor, easily lead to blockage of the nozzle.
The ink bottle, ink bottle is provided for the device for ink. Through the catheter from the ink bottle to the print cartridge ink delivery. The ink bottle usually adopts the bottle shaped appearance, and the constant pressure structure. This is mainly because the ink bottle of this design is easy to use and low cost and repeated filling.
Ink: ink conduit is connected with catheter print cartridge and ink bottle pipeline. Including cable accessories, such as pipeline plate, wire etc.. Walk the line assembly is to facilitate the alignment and fixed wiring in the pipeline, usually without damaging the printer itself under the condition of construction.
Said structure is mainly for readers have an intuitive feeling of continuous ink, thus the fault itself will have a more clear understanding. Below, the author aimed at using continuous for several fault often appear in the ink case analysis.
One case: unable to identify the cartridge
The use of continuous ink users may often encounter such a situation: in the machine after a period of time, not in print, because the printer cannot identify the black cartridge.
The fault reason and solution: this situation is mainly because the waste ink printer is full. In fact, each kind of ink-jet printer has set a fixed parts life. When certain parts reach the service life, the printer will prompt to print. The waste ink is easy to form a continuous ink system in use process, so it is easy to lead to the waste ink full storehouse. This can
be done in two aspects: processing or use this printer motherboard software reset reset, thereby eliminating the printer settings; or to repair the waste ink in the sponge replace. The author recommends that users use the latter. Because just cleared easily lead to missing burned waste ink printer.
Case two: print head car swing speed is slow, resulting in low speed printing
Continuous ink supply system reform tend to transform the original cartridge, this transformation will inevitably cause the burden of carriage. In the heavy load situation, the word car will slow. But the hea
vy load will lead to accelerated aging and increase the belt printer carriage and connecting rod friction. All these will lead to slow print speed. Severe cases can lead to the word car can not be reset, and cannot be used.
Causes and solutions: 1, to replace the motor. The hose and the printer continuous ink supply system of wall friction, resulting in electric motor load increased, the long-term use of electric motor loss, try changing; 2, lubricating rod. The use of time for a long time, the word car friction inside the machine and the connecting rod becomes large, resulting in increasing the resistance of the electric motor is running slow.
When the connecting rod lubrication fault can be solved; 3, printer belt aging. The friction drive gear connected with the motor assembly variable belt printer accelerated aging, then cleaning and lubrication can reduce fault belt aging.
Case three: printer nozzle clogging
This is after the ink supply system for printer installed on one of the most common fault. Because the ink is easy to cause heavy impurity precipitation, so the printer head will thus blocked.
Failure causes and solutions: clogging is almost as impurity precipitate, also partly because the ink is too acidic caused spray corrosion. If it is because the printer for unused or add non original ink ink delivery system caused by the obstacle or the print head plug, it is best to carry out the washing operation of nozzle. If the water washing can not solve the problem, only the head removed, soaked in about 50-60 DEG C with pure water, cleaning, washing to dry after use. If there is still no significant effect of repeated cleaning, that spray nozzle aperture has been blocked, the failure of the replacement of the nozzle only.
In addition to note is the printer head service life limit, such as inkjet printer head of EPSON's life is about 20 - 30 cartridges, therefore, does not use the continuous ink can always guarantee low cost.
In addition, the mouth cleaning pump fault is the main cause of inkjet printer head. The printer cleaning pump mouth protection to play a decisive role in the printer head. The carriage return, to head for weak gas treatment by cleaning pump nozzle, nozzle for sealing protection. A break in the printer or install a new cartridge nozzle, a suction pump at the lower
end of the machine to the nozzle of suction, suction pump working accuracy is good. But in the actual operation, performance and air tightness of the suction pump will be decreased due to the increase of
residual concretion time, dust and ink in the mouth. If the user does not carry out regular inspection or cleaning, it will make the printer nozzle continuous failure similar plug. So often maintain a suction pump. The specific method is to use the printer cover down unloading car, using a needle aspiration of pure water for irrigation, in particular to mouth embedded in the porous pad fully cleaned. Note that this part of the cleaning, cleaning must not use ethanol or methanol, this will cause a microporous gasket dissolved in this component deformation mosaic. At the same time can come into contact with the lubricating oil pump mouth, oil pump will make the mouth parts of the rubber sealing ring to seal protection nozzle deformation.
Case four: the replacement of the new panel will display "ink cartridges"
Usually only in the normal ink consumption under the condition of late, the control panel on the "ink" light will be bright. If the replacement ink cartridges, printer panel on the "ink" light is on, then the fault of printer.
The fault reason and solution: this kind of failure which might be a cartridge not installed or cartridge itself and detection circuit problem. Another possibility is in the off state to remove the old cartridge and replace the new cartridge. To replace the cartridge, printer of ink delivery system for filling ink, and this process will not be carried out in the

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。