MATERIAL SAFETY DATA SHEET
A.MANUFACTURER/DISTRIBUTOR
THE BELDEN BRICK COMPANY                                DATE PREPARED:    JUNE 10, 1998
P.O. BOX 20910                                                                REVISION DATE:      MARCH 11, 2009
CANTON, OHIO  44701-0910                                          PHONE NUMBER:    330-456-0031
B.PRODUCT IDENTIFICATION
PRODUCT NAME:  BRICK                                                                                      CHEMICAL NAME:  MIXTURE
CHEMICAL FAMILY:  PREDOMINANTLY ALUMINUM SILICATES              FORMULA:  MIXTURE
C.PRODUCT COMPONENT(S)
% BY                      ACGIH                OSHA
reactive skin
COMPONENTS                                CAS NO.                  WEIGHT                    TLV                      PEL
ALUMINUM SILICATES              VARIOUS                  75-85                      10 MG/M3            15 MG/M3
IRON COMPOUNDS                      VARIOUS                    0-5                      10 MG/M3            10 MG/M3
CALCIUM COMPOUNDS              VARIOUS                    0-12                      15 MG/M3            15 MG/M3
QUARTZ                                          14808-60-7                  VARIES              0.025 MG/M3        10 MG/M3
(RESPIRABLE)      %SiO2 + 2 (RESPIRABLE)
BARIUM COMPOUNDS                VARIOUS                    0-3                            NE                        NE
IRON CHROMITE                            1308-31-2                    0-3                          1 MG/M3            1 MG/M3
MANGANESE COMPOUNDS        VARIOUS                    0-3                            NE                        NE
D.PERSONAL PROTECTION INFORMATION
VENTILATION:              WHEN SAWING BRICK, USE ADEQUATE VENTILATION TO MAINTAIN EXPOSURE
BELOW  THE OSHA PEL AND ACQIH TLV.
RESPIRATORY                FOR CONCENTRATIONS EXCEEDING THE OSHA PEL OR ACQIH TLV, USE NIOSH/MSHA
PROTECTION:                APPROVED RESPIRATOR.
EYE  PROTECTION:        USE SAFETY GLASSES WITH SIDE SHIELDS.  FACE SHIELDS SHOULD ALSO BE USED
WHERE DRY SAWING OF BRICK OCCURS.
SKIN PROTECTION:      USE GLOVES AND/OR PROTECTIVE CLOTHING IF ABRASION OR ALLERGIC
REACTIONS ARE EXPERIENCED.
OTHER:                            WEAR STEEL-TOED SAFETY SHOES.  A WET SAW IS RECOMMENDED FOR SAWING BRICK.
E.HANDLING AND STORAGE PRECAUTIONS
AVOID DUST INHALATION, EYE CONTACT AND EXCESSIVE OR PROLONGED SKIN CONTACT.  WEAR PROTECTIVE
EQUIPMENT AND/OR GARMENTS DESCRIBED IN SECTION D IF EXPOSURE CONDITIONS WARRANT.
F.REACTIVITY DATA
STABILITY:    STABLE                            INCOMPATIBILITY (MATERIALS TO AVOID):    NONE KNOWN
CONDITIONS TO AVOID:    NONE KNOWN        HAZARDOUS POLYMERIZATION:  WILL NOT OCCUR
HAZARDOUS DECOMPOSITION PRODUCTS:    NONE KNOWN    CONDITIONS TO AVOID:  NONE KNOWN
G.HEALTH HAZARD DATA*
RECOMMENDED EXPOSURE LIMITS:              SEE SECTION C
ACUTE EFFECTS OF OVEREXPOSURE:
EYE:                    MAY CAUSE MILD TO SEVERE IRRITATION BY ABRASION WITH DUST OR CHIPS.
SKIN:                  BRICK DUST OR CHIPS MAY CAUSE ALLERGIC REACTIONS.  EXCESSIVE EXPOSURE
MAY RESULT IN ABRASIONS.
INHALATION:    BRICK DUST OR CHIPS MAY CAUSE CONGESTION AND IRRITATION IN NASAL AND
RESPIRATORY PASSAGES.
INGESTION:        NONE KNOWN
SUBCHRONIC AND CHRONIC EFFECTS OF OVEREXPOSURE:
EXCESSIVE EXPOSURE TO PARTICULATES (DUST) OVER AN EXTENDED PERIOD OF TIME MAY
RESULT IN THE DEVELOPMENT OF  PULMONARY DISEASES.
CARCINOGENICITY:
NTP CLASSIFIES RESPIRABLE CRYSTALLINE SILICA AS A KNOWN CARCINOGEN.  IARC CLASSIFIES
RESPIRABLE CRYSTALLINE SILICA (QUARTZ/CRISTOBOLITE) AS A GROUP 1 CARCINOGEN.
*The dust generated from dry sawing brick may contain silica and may be a potential health problem for the lungs although we
are aware of no scientific evidence of a health problem.
FIRST-AID AND EMERGENCY PROCEDURES:
EYE:                          FLUSH EYES WITH RUNNING WATER, OBTAIN MEDICAL ASSISTANCE IF
IRRITATION CONTINUES.
INHALATION:          REMOVE FROM EXPOSURE TO AIRBORNE PARTICULATE.  CONSULT A
PHYSICIAN IF BREATHING DOES NOT RETURN TO NORMAL.
INGESTION:            N/A
SKIN:                        WASH WITH SOAP AND WATER, IF AN ALLERGIC REACTION CAUSES A RASH
THAT DOES NOT HEAL IN AN APPROPRIATE TIME,  CONSULT A PHYSICIAN.
TREAT ABRASIONS AS ANY OTHER SCRAPE OR CUT, WITH DISINFECTANTS AND
BANDAGES.
H.PHYSICAL DATA
APPEARANCE/ODOR:      GRANULAR SOLID, ESSENTIALLY ODORLESS, WIDE RANGE OF COLOR
BOILING POINT:        N/A                SPECIFIC GRAVITY (H2O = 1) 2.6 (APPROXIMATE)          PH:    N/A
VAPOR PRESSURE:      N/A            PERCENT VOLATILE BY VOLUME:      N/A      VAPOR DENSITY:      N/A
SOLUBILITY IN WATER:      NEGLIGIBLE            EVAPORATION RATE (ETHYL ETHER = 1):    N/A
I.FIRE AND EXPLOSION DATA
FLASH POINT:      N/A                    FLAMMABLE LIMITS  (% BY VOLUME IN AIR):  LEL – N/A  VEL – N/A
FIRE EXTINGUISHING MEDIA:    N/A        SPECIAL FIRE FIGHTING PROCEDURES:    N/A
FIRE AND EXPLOSION HAZARDS:    N/A
J.    SPILL OR LEAK PROCEDURES                                    K.    WASTE DISPOSAL
THE ONLY CONCERN IS TO CONTROL DUSTS                                THIS MATERIAL IS CLASSED AS A NON-
HAZARDOUS SOLID-WASTE FOR DISPOSAL
K.RCRA CLASSIFICATION  N/A M.    DOT SHIPPING DATA N/A
L.    PROTECTION REQUIRED FOR WORK ON CONTAMINATED EQUIPMENT N/A
M.    HAZARD CLASSIFICATION
___X_____            THIS PRODUCT MEETS THE FOLLOWING HAZARD DEFINITION(S) AS DEFINED BY THE
OCCUPATIONAL SAFETY AND HEALTH HAZARD COMMUNICATION STANDARD SECTION
1910.1200:
____    COMBUSTIBLE LIQUID          ____    FLAMMABLE AEROSOL
____    COMPRESSED GAS                  ____    EXPLOSIVE
____    FLAMMABLE GAS                    _X **  HEALTH HAZARD
____    FLAMMABLE LIQUID              ____    ORGANIC PEROXIDE
____    FLAMMABLE SOLID                ____    OXIDIZER
____    PYROPHORIC                            ____    UNSTABLE
____    WATER REACTIVE
_________            BASED ON INFORMATION PRESENTLY AVAILABLE, THIS PRODUCT DOES NOT MEET ANY OF
THE  HAZARD DEFINITIONS OF 29 CFR SECTION 1910.1200
N.SARA (TITLE III) REPORTS
COMPONENTS OF THIS PRODUCT THAT ARE SUBJECT TO THE REPORTING REQUIREMENTS OF SECTION 313 OF SARA AND
40 CFR PART 372:          N/A
COMPONENTS OF THIS PRODUCT THAT ARE INCLUDED IN THE SARA EXTREMELY HAZARDOUS SUBSTANCE LIST (40 CFR PART 355):    N/A
O. OTHER INFORMATION
** THE BELDEN BRICK CO. considers our product an “article” as defined in 29 CFR Part 1200 (b)(5)(iv) and 40 CFR Part 372.38.  As an article, an MSDS is not required and the product is exempt from all other requirements of the hazardous communication standard.  OSHA
requires an MSDS for brick since it is occasionally dry sawed.
N/A – Not Applicable          NE – Not Established
CLICK FOR SPANISH VERSION

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。