maselettronica
MINA
3,5” SMARC Carrier Board
Hardware Manual
maselettronica Revision History:
maselettronica Table of Contents Introduction (6)
1.1 The SMARC Formfactor (6)
2 Specifications (7)
2.1Features (7)
2.2 Part Numbers / Ordering Information (8)
2.3 Bock Diagram (9)
2.3 Connector Locations (10)
2.3 Boot Modes SW1 (11)
reactor debug mode is enabled2.8Power (12)
2.9Mechanical and Environmental (12)
4.0 Pinout and Signal Descriptions (13)
4.1Signal Terminology Descriptions (13)
4.2 Network Connector CN9 (14)
4.3 USB Connector CN6 (15)
4.4 Micro SD Connector CN17 (17)
4.5 mPCIe Connector CN14 (18)
maselettronica 4.6 mPCIe Connector CN15 (21)
4.7 Serial Debug Connector CN10 (24)
4.8 DC IN Connector CN1 (25)
4.8 MIPI CSI2 IN Connector CN8 (26)
4.9 RTC Batt Connector CN31 (29)
4.10 LVDS0/ePD/DSI Connector CN5 (30)
4.11 LVDS1 Connector CN7 (32)
4.11 RS232/CAN/GPIO CN11 (34)
4.12 SPI/ESPI/I2S/I2C CN12 (36)
4.13 MANAGEMENT IO CN13 (38)
4.2 The SMARC Connector CN18 (40)
4.1Module Pinout Top Side P (42)
4.2Module Pinout Top Side S (2)
4.2.1LVDS0/LVDS1 MODE (2)
4.2.2DSI MODE (build option) (3)
4.2.3ePD MODE (5)
4.2.4MIPI CSI1 (Camera) (6)
maselettronica 4.2.5I2S (Audio) (7)
4.2.6USB 2.0 Ports (8)
4.2.7PCIe Port (11)
4.2.8LAN Port (12)
4.2.9SDIO Port (13)
4.2.10SPI0 Port (15)
4.2.11QSPI (ECSPI) Port (16)
4.2.12General purpose I2C (17)
4.2.13General purpose I/O (GPIO) (18)
4.2.14UART (19)
4.2.14CAN BUS (20)
4.2.15 Miscellaneous (21)
4.2.16 Power and System Management (21)
4.2.17 Power (25)
5.0 SMARC pin to controller Anita module mapping (26)
6.0 Module Outline – 82mm x 50mm SMARC Module (27)
7.0 Carrier Outline – 102mm x 146mm (28)
版权声明:本站内容均来自互联网,仅供演示用,请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198,我们将在24小时内删除。
发表评论