javabyte数组与int,long,short,byte的转换实现⽅法实例如下：
public class DataTypeChangeHelper {
/**
* 将⼀个单字节的byte转换成32位的int
*
* @param b
*      byte
* @return convert result
*/
public static int unsignedByteToInt(byte b) {
return (int) b & 0xFF;
}
/**
* 将⼀个单字节的Byte转换成⼗六进制的数
*
* @param b
*      byte
* @return convert result
*/
public static String byteToHex(byte b) {
int i = b & 0xFF;
HexString(i);
}
/**
* 将⼀个4byte的数组转换成32位的int
*
* @param buf
*      bytes buffer
字符串数组怎么转成byte
* @param byte[]中开始转换的位置
* @return convert result
*/
public static long unsigned4BytesToInt(byte[] buf, int pos) {
int firstByte = 0;
int secondByte = 0;
int thirdByte = 0;
int fourthByte = 0;
int index = pos;
firstByte = (0x000000FF & ((int) buf[index]));
secondByte = (0x000000FF & ((int) buf[index + 1]));
thirdByte = (0x000000FF & ((int) buf[index + 2]));
fourthByte = (0x000000FF & ((int) buf[index + 3]));
index = index + 4;
return ((long) (firstByte << 24 | secondByte << 16 | thirdByte << 8 | fourthByte)) & 0xFFFFFFFFL;
}
/
**
* 将16位的short转换成byte数组
*
* @param s
*      short
* @return byte[] 长度为2
* */
public static byte[] shortToByteArray(short s) {
byte[] targets = new byte[2];
for (int i = 0; i < 2; i++) {
int offset = (targets.length - 1 - i) * 8;
targets[i] = (byte) ((s >>> offset) & 0xff);
}
return targets;
}
/**
* 将32位整数转换成长度为4的byte数组
*
* @param s
*      int
* @return byte[]
* */
public static byte[] intToByteArray(int s) {
byte[] targets = new byte[2];
for (int i = 0; i < 4; i++) {
int offset = (targets.length - 1 - i) * 8;
targets[i] = (byte) ((s >>> offset) & 0xff);
}
return targets;
}
/**
* long to byte[]
*
* @param s
*      long
* @return byte[]
* */
public static byte[] longToByteArray(long s) {
byte[] targets = new byte[2];
for (int i = 0; i < 8; i++) {
int offset = (targets.length - 1 - i) * 8;
targets[i] = (byte) ((s >>> offset) & 0xff);
}
return targets;
}
/**32位int转byte[]*/
public static byte[] int2byte(int res) {
byte[] targets = new byte[4];
targets[0] = (byte) (res & 0xff);// 最低位
targets[1] = (byte) ((res >> 8) & 0xff);// 次低位
targets[2] = (byte) ((res >> 16) & 0xff);// 次⾼位
targets[3] = (byte) (res >>> 24);// 最⾼位,⽆符号右移。
return targets;
}
/**
* 将长度为2的byte数组转换为16位int
*
* @param res
*      byte[]
* @return int
* */
public static int byte2int(byte[] res) {
// res = InversionByte(res);
// ⼀个byte数据左移24位变成0x??000000，再右移8位变成0x00??0000
int targets = (res[0] & 0xff) | ((res[1] << 8) & 0xff00); // | 表⽰安位或
return targets;
}
}
以上就是⼩编为⼤家带来的java byte数组与int,long,short,byte的转换实现⽅法全部内容了，希望⼤家多多⽀持~

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。