Fixed orifice pressure compensated flow control valve with reverse flow check
Functional Group: Products : Cartridges : Flow Control : 2 Port : Fixed Orifice, Pressure Compensated, with Reverse Flow Check
Capacity: 6 gpm (23 L/min.) Model: FCCB
Product Description Fixed-orifice, pressure-compensated flow controls with reverse-flow check provide precise flow regulation for meter-in or meter-out applications where there may be wide pressure fluctuations. An integral high-capacity check valve provides unrestricted flow from port 2 to port 1. The flow setting is specified by the user and is set at the factory.
Download
Technical Features Customer must specify a flow rating. Factory set flow ratings are within +/- 10% of the requested setting. All 2-port flow control cartridges are physically and functionally interchangeable (i.e. same flow path, same cavity for a given frame size). However, cartridge extension dimensions from the mounting surface may vary. The tuneable control option provides +/- 25% variation from the nominal factory pre-set flow. Turn the adjustment clockwise to increase. Corro
sion resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP (see Option Selection below). External parts are made from stainless steel with titanium or brass components, where applicable. Internal parts are made from carbon steel leaded alloy, the same as standard valves. For further details, please see the Materials of Construction page. Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
The sharp-edged orifice design minimizes flow variations due to viscosity changes.
Technical Data U.S. Units Cavity Capacity Maximum Operating Pressure Series (from Cavity) 6 gpm 5000 psi Series 1 T-13A 23 L/min. 350 bar Metric Units
Valve Hex Size Valve Installation Torque Adjustment Screw Internal Hex Size Adjustment Locknut/Cap Hex Size Adjustment Nut Torque Seal Kits - Cartridge Seal Kits - Cartridge Model Weight
7/8 in. 30 - 35 lbf ft 5/32 in. 9/16 in. 80 - 90 lbf in. Buna: 990-010-007 Viton: 990-010-006 0.23 lb.
22,2 mm 41 - 47 Nm 4 mm 15 mm 9 - 10 Nm
0.10 kg.
FCCB-XAN
$46.10
Recommended List Pricereplaceable
Control Preferred Options L Tuning Adjustment Standard Options K X Handknob Not Adjustable +14.00 +0.00 +8.00
Setting Range Preferred Options A* Replaceable Orifice .1 - +0.00 6 gpm (0,4 - 23 L/min.)
Seal Material Preferred Options N Buna-N +0.00
Material/Coating Modifier Preferred Options No modifier (standard material with no special coating) Special Options
Standard Options V Viton +3.50
/AP Stainless Steel, Passivated Control: L +216.40 Control: C +239.40 Our corrosion resistant produ
ct line is growing! If you are interested in a corrosion resistant option for this model, please contact Sun.
Additional Options (Click Here) Control Setting Range Seal Material
C* Tamper Resistant - Factory Set
+15.00
B* Permanent Orifice .1 - 6 gpm (0,4 - +0.00 23 L/min.)
If the modifier is /AP, the control must be C or L
* Special Setting required, specify at time of order
Related Documents (opens in new window): Explanation of Sun cartridge control options - US units. Explanation of Sun cartridge control options - metric units. Copyright © 2002-2013 Sun Hydraulics Corporation. All rights reserved. Terms and Conditions - ISO Certification - Statement of Privacy

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。