10 Failure to properly select the “BAC” suffix could result in you receiving product that is not BAA compliant product with no
recourse for an RMA or refund. This BAC designation hereunder does not address (i) the applicability of, or availability of
a waiver under, the Trade Agreements Act, or (ii) the “Buy America” domestic content requirements imposed on states,
localities, and other non-federal entities as a condition of receiving funds administered by the Department of Transportation or other federal agencies.
replaceable
11 Consult Signify to confirm whether specific accessories are BAA-compliant.
Accessories11 (order separately)
• FMA24 – 2'x4' “F” mounting frame for NEMA “F” mounting
• EVD4L – EvoGrid 2'x4' rectangular ribbed replacement lens
• EVDS4L – EvoGrid 2'x4' rectangular smooth replacement lens
• EVR4L – EvoGrid 2'x4' round ribbed replacement lens
• EVRS4L – EvoGrid 2'x4' round smooth replacement lens
• FSK24 – 2'x4' surface mount field installation kit (factory welded seams), order with -TAP (top access plate) option (EMLED option not available)
• FSF24 – 2'x4' surface mount field assembly kit, order with -TAP (top access plate) option (EMLED option not available)
SWZCS accessories11 (order separately)
• IRT9015 – handheld remote for grouping and configuration(at least one remote required for any SWZCS installation).General Notes
•  All options factory installed.
•  All accessories are field installed.
•  Many luminaire components, such as reflectors, refractors, lenses, sockets, lamp holders, and LE
Ds are made from various types of plastics which can be adversely affected by airborne contaminants. If sulfur based chemicals, petroleum based products, cleaning solutions, or other contaminants are expected in the intended area of use, consult factory for compatibility.
Project:
Location:
Cat.No:
Type:
Lamps:
Day-Brite / CFI EvoGrid recessed utilizes highly reliable and efficient Philips LED platform boards and dimmable driver enabling market leading performance in its category. Its soft opal diffuser with large luminous area minimizes apparent brightness compared to other basket luminaires and provides general lighting perfect for a wide variety of applications.    Air return model
Static model
Not all product variations listed on this page are DLC
Ordering guide – PoE controls (Static & Tunable White) example: 2EVG43L8TW-4-D-LV-POE-IAO
Width Family Ceiling
Type Air Function Lumens
(nominal delivered)
Color Length Center
Diffuser
Voltage Driver Options
2EV G–4––LV–POE–
2 2'EV EvoGrid G Grid Blank Static
H Air return 38L 3800
43L 4300
48L 4800
Static White
830 80 CRI,
3000K
835 80 CRI,
3500K
840 80 CRI,
4000K
850 80 CRI,
5000K
Color Tuning
8TW 80CRI, 2700K
thru 6500K
tunable white
4 4'  D Diffuse
(opal)
DS Diffuse
smooth
(opal)
R Diffuse
round
ribbed
(opal)
RS Diffuse
round
smooth
(opal)
LV Low voltage POE Power over
ethernet
AG Antimicrobial finish
EMPOE1600lm integral
emergency driver and
battery pack
IAO Integral Interact
Office daylighting and
occupancy sensor,
enables wireless
connected lighting
control
IAOSB Interact Office advanced
wired sensor bundle,
integral SC2000 w/
IoT capabilities for
enterprise scale projects
Ordering guide – DALI Controls (Tunable White) example: 2EVG43L8TW-4-D-UNV-DTW-IAO
Width Family Ceiling
Type Air Function Lumens
(nominal delivered)
Color Length Center
Diffuser
Voltage Driver Options
2EV G–4––UNV–DTW–
2 2'EV EvoGrid G Grid Blank Static
H Air return 39L 3900
43L 4300
49L 4900
56L 5600
65L 6500
8TW  80CRI,
2700K thru
6500K
tunable
white
4 4'  D Diffuse
(opal)
DS Diffuse
smooth
(opal)
R Diffuse
round
ribbed
(opal)
RS Diffuse
round
smooth
(opal)
UNV Universal
Voltage,
120-277
volt
DTW Dual
channel
tunable
white
AG Antimicrobial finish
F1/D 3/8" twin flex, 3 wire 18 gauge
6' for dimmable luminaires
F2/7W 3/8" single flex, 7 wire 18
gauge 6' for emergency
EMLED Factory wired Bodine BSL310
integral emergency pack.
Nominal 1100lm
IAO Integral Interact Office
daylighting and occupancy
sensor, enables wireless
connected lighting control
IAOSB Interact Office advanced
wired sensor bundle, integral
SC2000 w/IoT capabilities
for enterprise scale projects
GLR Fusing, fast blow
DSC  Quick driver disconnect
1 Indicator light and test switch located on housing side panel..
Application
• A highly efficient, visually comfortable,
architecturally styled recessed LED luminaire designed with a minimalistic strategy to achieve sustainable objectives.
• Low profile configuration is only 2-3/4" deep, requiring minimal plenum space.
• Soft opal diffuser with large luminous area minimizes apparent brightness and provides high visual comfort perfect for a wide variety of general lighting applications like offices, schools, retail, or healthcare.
• Multiple lumen packages over a wide range to
provide significant application flexibility over light levels and/or luminaire spacing.
• Directs a controlled amount of light to the higher angles in the room to balance the brightness of
the surfaces and eliminate “cave effect” while
creating the impression of a larger, brighter space without glare.• Excellent color rendering with a CRI of 80.
• LEDs are an excellent source for use with controls
since dimming or frequent switching does not
degrade the performance or life of the source.
Integral or external sensors are available for use.• Designed for use with standard Grid (NEMA “G”) or
Narrow Grid (NEMA “NFG”) ceiling T-bars.  Drywall
or plaster requirements
can be accommodated by using an FMA24 “F”
mounting frame (sold separately.)
• Continuous row mount option (CRM) includes
wireway covers on each end and on one side of housing.
Construction/Finish
• Uncomplicated design is 2-3/4" in depth and only requires a few parts outside of the electrical system and hardware, creating several benefits: - Less material required  - Less packaging required  - Reduced weight
-
Less energy required for construction and  assembly
- More luminaires can be shipped per truck  to reduce fuel use and emissions
• Luminaire finish is matte white polyester for a high quality, durable finish.• T-bar grid clips are integral to body.• Access plate located on end provides easy field wiring. TAP option provides top mounted access plate.
Electrical
• Integral sensor options for occupancy sensing and/or daylight harvesting are available for
additional energy savings with no reduction of life or increase in installation labor.
• Total luminaire efficacy exceeding 139 LPW
(lumens per Watt) with high efficiency packages.
• LED board is easily accessible from below without
tools. Single LED board is replaceable if needed via plug-in connectors to ensure long service life.• L
ED driver is accessible from above.• Emergency driver is accessible from above.  To
estimate lumen output in emergency mode, multiply emergency pack wattage by efficacy, then by 1.10.  Typical lumen output is 1300lm for EMLED.• The GTD/E option is used to bypass wall switches and allow luminaire operation on auxiliary power. Generator transfer requires installation in conjunction with a UL1008 listed device.• The GTD/SNSR option is used to bypass integrated sensor control in the event of utility power loss. Generator transfer requires installation in conjunction with a UL1008 listed device.• Step dim 100/40% and additional dimming options available.
• 5 year manufacturer's limited warranty. Visit signify/warranties  for complete warranty information.
• TM-21 predicted L70 lumen maintenance up to
80,000 hours for high efficicacy and 50,000 hours for standard efficacy configurations.
• cETLus listed to UL and CSA standards, suitable for damp locations.
Enclosure
• Opal diffuser provides soft, comfortable lighting while maintaining high efficiency.• Diffuser requires no frames or fasteners and can be easily removed from below without tools if needed.
Energy data
Dimensions
Access Plate
Integral Grid Clips  – Bend upper tab outward at 90°.  Bend lower tab outward approx. 20°.Repeat for all four corners.
Interact Office Wired (PoE), Static White & Tunable White
• PoE based IoT connected lighting solution for large enterprises that span across multiple floors, buildings and require multiple gateways.• Use Interact Office software and insights to increase building efficiency, achieve building wide integration and optimize space through occupancy analytics.
• Human centric lighting through tunable white technology - Dynamic behaviors via scheduled lighting recipes mimicking daylight patterns or supporting biorhythms.
• IAOSB option in addition to occupancy and daylight sensing supports advanced IoT
capabilities such as people estimation analysis, desk level temperature & humidity sensing, noise classification, and BLE beacon.
• PoE lighting controller is accessible from below.
• Integral sensor option for occupancy sensing (PIR) and/or daylight harvesting available for additional energy savings.
• Optional integral emergency controller and battery pack provides 600lm nominal output. Test switch and indicator light mounted on side of chassis on one end.
• Emergency battery has a 3 month pre-installed shelf life, and must be stored and installed in environments of 20C to 30C (-4F to 86F) ambient, and 45-85% relative humidity.
• For more information on Interact Office Wired, visit: www.interact-lighting/office  or www.usa.lighting.philips/systems/system-areas/offices
Tunable White with DALI
• Signify tunable white solutions are designed to help maximize the influence of lighting on your daily life.
• Dynamic behaviors via scheduled lighting recipes mimicking daylight patterns or supporting biorhythms.
• Scene setting via lighting pre-sets based on various combinations of lighting color temperature and intensity.
www.usa.lighting.philips/products/product-highlights/tunable-white-technology
Wired Controls Options
SpaceWise DT (SWZDT)
• Standalone daylight and occupancy sensing with advanced grouping, wireless mesh networking and dwell time.
• Commissioning via compatible Android phone and Philips Field App
• Dimming via compatible Zigbee wireless wall switch only (see link below for details)• Register for the commissioning app at registrationponentcloud.philips/appregistration/
• Integral sensing options may not be combined • For more information including recommended switches, refer to the following: –
SWZDT  –  www.usa.lighting.philips/systems/lighting-systems/spacewise
Emergency Options (ER100)
• Power Sensing (Factory default) – Recommended UL924 option requires unswitched power sense line, absence of voltage on the normal circuit triggers luminaire to 100% output
• Power Interruption Detection (Field option) – Detects AC power interruption >30ms triggers 90 minute emergency mode with luminaire at 100% output
Interact Pro scalable sensor for
Foundation, Advanced & Enterprise tiers (SWZCS and an evolution of SpaceWise)
• SWZCS is a connected sensor with integral occupancy and daylight sensing and supports wireless mesh connectivity.
• The sensor works in the Foundation mode
(similar to SpaceWise) when configured without a gateway or in an Interact Pro Advanced or
Enterprise mode if a compatible gateway is used.• Interact Pro includes an App, a portal and a
broad portfolio of wireless luminaires, lamps and retrofit kits all working on the same system.• Startup is implemented via Interact Pro App (Android or iPhone) & BlueTooth connectivity. The App provides flexibility to choose between a gateway or non gateway mode for setup.• Setup with the gateway requires wired internet access to the gateway. It is possible to add a gateway at a later point.
• Prepare project configuration steps remotely and use IRT9015 remote onsite to identify and group devices together.• Compatible with:
- SWS200 wireless scene switch
- Battery powered IP42 presence sensor OCC  sensor IA CM WH 10/1
- Battery powered IP42 presence & daylight  sensor OCC-DL sensor IA CM IP42 WH - LCN3110: Battery powered IP65 presence  sensor, OCC sensor IA CM IP65WH
-LCN3120: Battery powered IP65 presence  & daylight sensor, OCC-DL sensor IA CM  IP65 WH
• For more information on Interact Pro visit: www.interact-lighting/interactproscalablesystem
Radio only sensor (RADIO)
• Integral RADIO only sensor simply enables wireless mesh connectivity to the luminaire without any occupancy or daylight sensing.  • Ideal for applications where sensing functionality is managed by other Interact devices and the luminaire only needs to have wireless connectivity.
Interact Pro scalable sensor bundles for Enterprise tier
• IAOSB option in addition to occupancy and daylight sensing supports advanced IoT
capabilities such as people estimation analysis, desk level temperature & humidity sensing, noise classification, and BLE beacon.
• Compatible with SWS200 wireless scene switch and Interact Ready wireless battery powered sensors.
• Use Interact software and insights to increase building efficiency, achieve building wide integration and optimize space through occupancy analytics.
• Requires compatible Gateway and internet connectivity for commissioning.
• For more information, visit:
www.interact-lighting/office or
www.usa.lighting.philips/systems/system-areas/offices
Wireless Controls Options
Foundation
Advanced Enterprise
Currently supported maximum system size
To be able to design the lighting system correctly for the customer, it is important to know the prime characteristics of the system, its possibilities and limitations.

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。