ICS 31. 020
L10
Record No.                                        SJ
replaceable
Electronic Industry Standard of the People’s Republic of China
                                        SJ/T 11364－2014
                                      Replacing  SJ/T 11364－2006
Marking for the restriction of the use of hazardous substances in electronic and electrical products
Issued on July 9, 2014                      Implemented on January 01, 2015
Issued by Ministry of Industry and Information Technology of the People’s Republic
of China
                                                        SJ/T 11364－2014
Preface     
This Standard is drafted in accordance with the rules in GB/T1.1-2009
This Standard will replace and nullify SJ/T 11364—2006, Marking Requirements for Control of Pollution Caused by Electronic Information Products.
The major changes of this Standard are as follows in comparison with SJ/T 11364—2006
a)  In Name and Scope, “electronic information products” in SJ/T 11364-2006 is changed to “electronic and electrical products”,  “pollution control” to “restricted use of hazardous substances”；
b)  Adding explanation of reference use for logistics processes (see Section 1);
c)  Deleting normative reference documents GB 18455, Package Recycling Markings (See SJ/T 11364-2006, Section 2);
d)  Adding terms and definitions of “electronic and electrical products”, “hazardous substance” and “logistics”(see 3.1, 3.2 and 3.7) and deleting  terms and definitions concerning "electronic information product", “toxic and hazardous substance”, “producer”, “importer” and “packaging material” in SJ/T 11364—2006 (see SVT 11364-2006 3.1,3.2, 3.4, 3.5 and 3.7);
e)  Adding marking for electronic and electrical products with display function with digital format marking;
f)  Deleting packing material name marking requirement (see SJ/T 11364—2006 Section 9).
Please note that some contents of this document may involve patents. The release organization of this document shall not be responsible for identifying these patents.
This Standard was proposed by the Electronic Information Product Pollution Control Standards Work Group of the Ministry of Industry and Information Technology.
This Standard is under the jurisdiction of the China Electrical Standardization Institute
China Electrical Standardization Institute and Motorola (China) Solutions Co., Ltd. were responsible for the drafting of the standard.
The units that participated in drafting of this Standard: see Appendix A.
The main drafters for this Standard: Meng Yang， Shuoxiang Han and Xinjian Zhang.
This Standard was first released in 2006.
SJ/T 11364－2014
Introduction
Due to the needs of technologies and product functions, some electronic and electrical pr
oduct materials contain hazardous substances such as lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers, etc. In order to prevent the adverse effects of products that contain the these substances on human health and the environment after their use and being discarded and to further standardize the markings for electronic and electrical products, based on Management Methods for the Control of Pollution from Electronic Information Product (Order No. 39 of the former Ministry of Information Industry) and by referencing related international standards and industrial practices, the former Ministry of Information Industry released SJ/T 111364—2006, Marking for Control of Pollution Caused by Electronic Information Product, .
    With the need for revision of the Management Methods for the Control of Pollution from Electronic Information Products and the needs of enterprises for image display markings and markings for logistics processes during the standard's use for their products, SJ/T 111364—2006 has gradually become inadequate in fully application. The goal of the formulation of this Standard is to solve the these problems and provide further elaborate a
nd perfect the marking requirements for electronic and electrical products in order to improve the environment, facilitate application, implement national policies and regulations, and reduce enterprise management costs.
                                                                        SJ/T 11364－2014
Marking for the restriction of the use of hazardous substances in electronic and electrical products

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。