Rugby Manufacturing Manual
securingRANCHER
INSTALLATION & OPERATION MANUAL
INTRODUCTION
IMPORTANT!! Read this manual thoroughly prior to installation and operation.  This manual outlines the installation and operation of a Rancher platform manufactured by Rugby Manufacturing Co.  This m
anual should be kept readily accessible for any potential operator at all times.  Should you have any questions or concerns, please contact your dealer or a Rugby Manufacturing customer service representative before Toll Free: 1-800-869-9162  •  Office: 1-701-776-5722  •  Fax: 1-701-776-6235
Visit www.rugbymfg for further information.
Body Serial Number:
In Service Date:
Table of Contents
How to Use This Manual (1)
< .. (1)
Reference Information (1)
Serial Number (1)
Torque Values Chart (2)
General Safety (2)
General Warnings (3)
Assembly & Installation ..........................................................................................................4-8 Bulkhead Installation (4)
General Installation ..............................................................................................................5-6 Lighting Configuration . (7)
Maintenance & Operation (8)
Reference Information
Torque Values
This chart  i s to be used as a guide during installation.
General Warnings:
• Welding, oxy-fuel cutting, or grinding sparks can cause fuel to ignite that in turn can lead to injury or death. Always take adequate steps to avoid ignition of fuel from fuel tanks when-welding, grinding, or oxy-fuel cutting during equipment installation.
• Heat from the truck’s exhaust system can cause hydraulic component failure and may lead to a fire that could cause injury or death. Always install equipment in locations where heat from the exhaust system will not damage any hydraulic component.
• Malfunctioning equipment can cause property damage, injury or death. Always have faulty equipment repaired before continuing its use. Consult the manufacturer if required.
• The inadvertent shorting of the vehicle’s electrical supply can cause a fire or equipment-damage that could lead to injury or death. Always disconnect the vehicle battery prior toin-stalling, servicing, or repairing electrical items.
• Damage to brake lines during equipment installation or installing bolts or equipment in such
a way that the line will ru
b and become damaged can lead to brake failure which can cause
an accident and can lead to severe injury or death. Always take adequate steps to prevent brakeline damage during installation and isolate brake lines from installed equipment.
• Check load making sure that rocks, equipment, or any other object will not fall off of vehicle while driving vehicle. Falling objects can cause equipment or property damage, bodily injury or death.
• Make sure all doors are closed and latched before moving vehicle. Swinging doors or falling objects can cause equipment or property damage, bodily injury or death.
• Overloading of a vehicle can cause vehicle componenet dmage or an accident which may cause injury or death. Never exceed the gross vehicle weight (GVWR) or the gross axle weight (GAWR) rating or gross combined vehicle rating (GCWR) of your vehicle.
• Not installing or operating equipment correctly can cause component damage or an acci-dent which may cause injury or death. Always install and operate equipment in accordance-with manufacturers’ instructions. Read and understand this manual fully before proceeding.• Missing or damaged decals can lead to accidents that may cause serious injuries or death.

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。