© Copyright Clipsal Australia Pty Ltd 2008. All rights reserved. This material is copyright under Australian and international laws. Except as permitted under the relevant law, no part of this work may be reproduced by any process without prior written permission of and acknowledgement to Clip
sal Australia Pty Ltd. Clipsal, C-Bus and Schedule Plus are registered trademarks and HomeGate is a trademark of Clipsal Australia Pty Ltd.
Lantronix is a registered trademark and DeviceInstaller is a trademark of Lantronix Corporation California.
Java is a registered trademark of Sun Microsystems, Inc.
Windows is a registered trademark of Microsoft Corporation.
polarised
The information in this manual is provided in good faith. Whilst Clipsal Australia Pty Ltd (CAPL) has endeavoured to ensure the relevance and accuracy of the information, it assumes no responsibility for any loss incurred as a result of its use. CAPL does not warrant that the information is fit for any particular purpose, nor does it endorse its use in applications that are critical to the health or life of any human being. CAPL reserves the right to update the information at any time without notice.
V2.0 Nov 2006/ Aug 2008
1.0 Product Range    5
2.0 Important Notes    5
3.0 Description 5
4.0 Wiring Instructions    6
5.0
C-Bus Network Connection
7  6.0 S tatus Indicators
9
6.1 Ethernet
9  6.2 C-Bus/Unit/Comms 9
7.0 C-Bus System Clock 10
8.0
C-Bus Network Burden
10  9.0 C-Bus Power Requirements 10  10.0 Power S urges 10  11.0 Megger Testing 11  12.0 Configuration
11
12.1 C-Bus Programming 11  12.2 Ethernet Setup 11
13.0
Factory Default Ethernet Settings
15
13.1 Server Configuration 15  13.2 Channel 1 Configuration 15  13.3 Expert Settings 15  13.4 Security 15  14.0 Electrical S pecifications 16  15.0 Mechanical S pecifications 17  16.0 S tandards Complied 18  17.0 Warranty 19
C-Bus Network Interface  Installation Instructions 4
C-Bus Network Interface  Installation Instructions
5500CN C-Bus Network Interface (with 12 V DC, 500 mA AU plug pack) E5500CN C-Bus Network Interface (no plug pack included)
• Both Ethernet and C-Bus connections are made via RJ45 sockets.
Ensure you make each connection to the correct socket.
• The use of any software not provided by Clipsal Integrated Systems (CIS) in conjunction with the installation of this product may void any warranty applicable to the hardware.
The 5500CN Series C-Bus Network Interface (CNI) provides an isolated communication path between a C-Bus and Ethernet network. When used in conjunction with an Ethernet connected PC, this allows a C-Bus network (or multi-network installation) to be:
• programmed with the C-Bus Toolkit software
• monitored and data logged using appropriate software
• controlled by C-Bus automation software such as Schedule Plus or HomeGate.
The control, monitoring and even programming of C-Bus networks can be performed at any practical location which has a connection to the Ethernet network; even off site.
The CNI contains a C-Bus network burden, and is capable of generating a C-Bus system clock signal. The unit is DIN rail mounted, measuring 4 modules wide (1 module = 17.5 mm).
5

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。