OWNER’S MANUAL
Version 1.0
ORIGIN EFFECTS® is a registered trademark of Origin Effects Limited.
All other product names and trademarks are the property
of their respective owners and are hereby acknowledged.
TUBE SCREAMER and IBANEZ are both trademarks of Hoshino Gakki Co, Ltd.
Origin Effects has no affiliation with Hoshino Gakki Co, Ltd.
No part of this publication may be reproduced in any form or by any means, whether  mechanical or electronic, without the written permission of Origin Effects Limited.
Origin Effects Limited reserves the right to change the features and specifications described herein w
ithout notice or obligation. Origin Effects Limited cannot be held responsible for any  loss or damage arising directly or indirectly from any error or omission in this manual.
PLEASE READ ALL INSTRUCTIONS, PAY ATTENTION TO SAFETY WARNINGS.
Document version 1.0
© Origin Effects Limited 2022
IMPORTANT:
This product is designed to be powered from a 9VDC, >80mA
power supply with 2.1mm centre-negative barrel connector.
Contents
Introducing the Halcyon Green Overdrive                                                                        4 Connecting the Halcyon Green Overdrive                                                                        4 C ontrols                                                                                                            5 Sample Settings                                                                                                    6 Appendix A: Physical Specification                                                                                7 Appendix B: Performance Specification                                                                          7 Appendix C: Connector Pin Out                                                                                  7 Appendix D: Safety Notices                                                                                        8 Appendix E: Warranty                                                                                            9
Introducing the HALCYON GREEN OVERDRIVE
The Halcyon Green Overdrive is a classic low-gain drive pedal featuring our proprietary Adaptive circuitry. This unique design allows it to adapt its voicing in response to pick attack and volume changes, making it one of the most dynamic and interactive overdrives out there. While it is based on the same green pedal that has inspired countless clones, this little box goes way beyond what the average overdrive has to offer.
polarisedWe based this pedal on the Ibanez® TS808 Tube Screamer® for a reason. Its mid-forward voicing, low-gain drive and a touch of clean signal make it a great choice for pushing an amp, allowing players to jump out of the mix with a thick solo tone. However, once you turn down your guitar volume or play softly, that mid-pushed drive tone can become a thin, nasal clean tone. It’s this all-or-nothing nature of classic drives that has us stacking numerous pedals for various shades of saturation.
The Adaptive Circuitry in the Halcyon Green Overdrive allows the pedal’s mid-forward voicing to gradually fade away as the pedal cleans up, giving you classic TS808 tone with your guitar cranked but revealing the full spectrum of your clean tone as you roll back the volume knob. This breakthrough feature means you never have to tread that fine line, wondering if your drive pedal should be on or off.
Key Features:
• Adaptive circuitry responds to volume changes and playing dynamics
• Based on the iconic Ibanez® TS808 Tube Screamer®
• DRY level control for extra tweakability
• Voice switch offers two types of mid push
• Ultra-high input impedance
• High-quality buffered bypass
• Premium components throughout
• Designed and built in England
Connecting the HALCYON GREEN OVERDRIVE
Controls
ADAPT SWITCH:
Position O:
Position II:
tone.
Position I: Less adaptive than Position II. This setting still responds well to dynamics and volume changes but maintains some bass and treble roll-off, perfect for keeping the low end tight and preventing feedback with high-gain tones.
Tip: To hear the ADAPT switch in action, select Position II, play some licks, then roll down your guitar volume to a clean tone and select Position O. You will hear a big difference between the adaptive and stock clean tones!
VOICE SWITCH: This switch gives you the ability to select either the classic TS808 mid hump or a brighter, more focused presence peak. The 808 setting is simply the standard voicing, while the MOD set-ting moves the mid hump slightly further up the frequency range, with a more resonant character. This can help maintain clarity with warmer pickups such as neck humbuckers. For Metal players using the Halcyon Green Overdrive to tighten up a high gain amp tone, the MOD setting adds even more presence and bite.
DRIVE: Turn clockwise to increase the amount of overdrive. Lower settings should be used when boost-ing an amp on the edge of breakup. When used with ADAPT settings I and II, high DRIVE settings can sound more natural than a typical drive pedal and will work well with a completely clean amp.
LEVEL: Sets the output level from the pedal. Turn clockwise to push the input of your amp. Keep this control set lower when using higher DRIVE settings.
TONE: Turn counterclockwise to roll off more high-end. Lower settings will result in a typical warm lead tone while higher settings will give a bright, cutting tone. With ADAPT settings I and II, the effect of the TONE control is reduced as the pedal cleans up, getting you back to your core clean tone.
DRY: This controls the level of clean signal. In the noon position, the clean level is the same as in a vintage Tube Screamer®. Turn clockwise to help maintain body, clarity and definition when used with an overdriv-en amp. Turn counterclockwise to remove the clean signal. This is recommended when using the pedal as a standalone overdrive pedal into a clean amp.

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。