序号报错内容
10004 No segments of sufficient size available
20005 Size value in segments out of bounds
3-000 Work area missing.
4-001 Too small memory. Work area impossible to establish.
5-002 Too small work area. Impossible to continue.
6-003 SSP system error in the work area.
7-004 SSP system error. Given parameter is too large.
8-005 SSP system error. Given parameter is too small.
9-006 SSP system error. The CO or the CTO is incorrect at the call. 10-007 System error, not to be referred to as SSP system error. 110101 Error in object structure, erroneous ELH
120102 Error in object structure, unexpected end of list
130103 Error in object structure, missing element
140104 Error in object structure, unexpected empty list
150105 Error in object structure, attempt to double object head 160106 Attempt to delete valid ELH:s
170107 Delivering and receiving lists overlap
180108 OL-field too small
190109 Invalid element pointer
200110 Attempt to allocate element with illegal size
210111 Attempt to store element with size <= 0
220112 Too many objects in workspace
230201 Upper bound of procedure call stack exceeded
240202 Upper bound of error stack exceeded
250203 Lower bound of procedure call stack exceeded.
260251 Error in parameter No. 1
270252 Error in parameter No. 2
280253 Error in parameter No. 3
290254 Error in parameter No. 4
300255 Error in parameter No. 5
310256 Error in parameter No. 6
320257 Error in parameter No. 7
330258 Error in parameter No. 8
340259 Error in parameter No. 9
350260 Error in parameter No. 10
360261 Error in parameter No. 11
370262 Error in parameter No. 12
380263 Error in parameter No. 13
390264 Error in parameter No. 14
400265 Error in parameter No. 15
410266 Error in parameter No. 16
420267 Error in parameter No. 17
430268 Error in parameter No. 18
440269 Error in parameter No. 19
450270 Error in parameter No. 20
460271 QXD04 is empty
470272 Illegal geometry type in QXD04
480273 Number of geometry elements does not match QXD04 490274 Error in form system
500299 General module interface inconsistence
510301 Overflow in object
520302 New object name already in use
530303 Object does not exist
540304 Invalid object pointer
550305 Open failure on input file
560306 Invalid format on input file
570307 Invalid object name (too long)
580308 Write failure on file
590321 Invalid logical data bank unit
600322 Logical data bank unit already in use
610323 Data bank table full
620324 Lock entry found instead of object
630325 Logical data bank unit not connected
640326 Object already exists in working area
650327 Object not found in the data bank
660328 Object not locked
670329 Data file has invalid format
680330 Object currently locked by another user
690331 Too many objects are already locked
700332 Object has invalid format
710333 Object already exists in data bank
720334 No room in data bank
730335 Unsupported object structure
740336 Virtual data bank already conneced
750337 Virtual data bank not connected
760338 Databank may not be of type "sequential db directory" 770339Attempt to store a non-picture object in a sequential db directory
780340 Open failure of directory file
790341 Close failure of directory file
800342 Record not found in the directory file
810343 Record locked
820344 Fatal error in directory file
830345 Error creating directory file
840346 Record already exists in directory file
850347 No room on output device when updating directory file 860348 Data bank currently locked by another user.
870349 Attempt to lock an object in a sequential db directory 880350 Open failure of data file
890351 Close failure of data file
900352 Record not found in the data file
910353 Record locked
920354 Fatal error in data file
930355 Error creating data file
940356 No room on output device when updating data file
950357 Two revisions of the same object not allowed in workspace 960358 Allocation map has invalid format
970360 Open failure of sequential data bank
980361 Close failure of sequential data bank
990362 End of file of sequential data bank
1000364 Fatal error in sequential data bank
1010365 Error creating sequential data bank
1020366 No room on output device when updating sequential data bank 1030367 Error in object code
1040368 Restored object size does not match the stored size. 1050369 Attribute type not recognized
1060370 Access to object not allowed
1070371 M2 can not read objects of version 4record是什么意思中文
1080372 Project not enabled to store objects of version 4
1090401 Too big contour, element maximum size exceeded
1100402 Error in record (card) decoding
1110403 Unknown record (card) type
1120404 Wrong order of picture elements
1130405 Unexpected end of file
1140406 Erroneous input term, should be record type
1150407 Unexpected new object, old one not completed
1160408 Unexpected geometry element
1170409 Erroneous term - violates input syntax
1180410 Unexpected component element
1190411 Unexpected subcomponent element
1200412 Syntax error in input
1210413 Data missing in input for component
1220414 Data missing in input for subcomponent
1230415 Data missing in input for text element
1240416 Unexpected subpicture element
1250417 Data missing in input for subpictures
1260418 Set of rules is not initiated
1270419 Number for placing rules is not found for specific parameter 1280501 Empty component
1290502 Wrong level for subcomponent
1300503 Empty subcomponent
1310504 Unknown data type for geometry element
1320505 Wrong level for geometry
1330506 Empty picture object
1340507 Unallowed scale factor
1350508 The element is not a subpicture
1360509 Unallowed level
1370510 Unallowed number of subpicture levels
1380511 Unallowed start level for identification
1390512 Unallowed end level for identification
1400513 Subordinate element missing
1410514 Empty picture
1420515 Transformation information missing
1430516 The element is not a subcomponent
1440517 Illegal font number
1450518 Symbol font file does not exist
1460524 Indicated segment does not exist
1470525 Points on the contour not given in the direction of the contour 1480526 Indicate element does not exist
1490527 Wrong type of element given
1500529 Object not initialized
1510530 Subordinate level not open
1520531 Element on superior level not open
1530532 Symbol does not exist 1540533 Size of element too big 1550534Mismatch between the opened subcomponent and the given 1560535 Text font file does not exist or out of range (8-99)1570536 Error in text font file (8-99)1580537 Error when loading text font file (8-99)1590538 Vector font file does not exist or out of range (1-99)1600539 Vector font does not exist 1610540 Vector font does exist but language not assigned 1620541 Internal symbol font error 1630701 Erroneous object head (ELH-error)1640702 Empty picture object 1650703 Attempt to identify an element not being a component 1660801 Error in activity code 1670802 First file does not exist 1680803 First message array too small 1690804 First index array too small 1700805 Second file does not exist 1710806 Second message array too small 1720807 Second index array too small 1730808 Message file not available 1740809 Impossible to open plotter file 1750810 Read error on first message file 1760811 Read error on second message file 1770812 Denoted message does not exist 1780901 Communication breakdown 1791001 CAT-object does not exist 1801002 Contour does not exist 1811003 Table row does not exist 1821004 Member does not exist 1831005 Segment part does not exist 1841006 Error in contour representation 1851007 Error in activity code specifying the contour to be treated 1861008Error in activity code specifying the part of the contour to be treated 1871009Error in activity code specifying the part of the table to be treated 188-100 Incorrect total name.1891010Error in activity code specifying the part of the table row to be treated 1901011Er
ror in activity code specifying the table member to be treated 1911012Error in activity code specifying the part of the table member to be treated 1921013 Invalid segment number 1931014Error in activity code specifying the part of the segment to be treated 1941015 Error in specifying the attribute to be treated 1951016Error in location parameter defining the kind of attribute to be treated 1961017Error in location parameter defining the position of the wanted element 1971018 Invalid current CAT-object number
1981019 Pointer in QCATPT of QWC030 to owner element not valid 199-101 Total name too long.2001020 The object is not a CAT-object 2011021 Error in attribute size 2021022 Erroneous segment type 2031023 Dimensions not equal in receiving and delivering contours 2041024Error in activity code specifying the part of a segment to be saved 2051025Error in activity code specifying the part of a contour to be saved 2061026 Given point is outside contour 2071027 Error in representation (must be 2 or 3)2081028Given representation does not correspond to the original representation in 2091029 Given data not sufficient to define the new coordinate system 210-102 Type too long.2111030Error in activity code specifying how to create a transformation matrix 2121031 Error in parameter defining the coordinate axis 2131032 Error in parameter defining the coordinate plane 2141033 Transformation matrix is not invertible 2151034 Error in activity code defini
ng point or vector 2161035Error in activity code specifying storing of attribute data (common area of 2171036 Segment given from input is a zero segment 2181037 Beta given from input does not belong to (0,1)2191038 Tangent vector undefined 2201039 Equation root < 0221-103 Attribute name too long.2221040 Vector along line is the zero vector 2231041 Vector perpendicular to plane is the zero vector 2241042 The contour is not closed 2251043 Transformation not possible because the transformation matrix includes a 2261044 Points not given in the direction of the contour 2271045 Error in activity code controlling tangent calculations 2281046 Error in tangent code 2291047 Too many point attributes 2301048 Given activity code does not allow equal contours 2311049 The contour does not contain any segments 232-104 Incorrect pointer.2331050 The contour is closed 2341051 Impossible to insert contour 2351052Error in activity code (PTYPE)specifying the type of projection 2361053The centre of projection lies in the projection plane (central projection)2371054The projecting lines are parallel to the projection plane (parallel 2381055 Input object and resulting object must not be equal 2391056 Error in contour code 12401057 Error in object code 22411058 2-attribute at contour level not found 2421059 2-attribute at object level not found 243-105 The first of the given objects in the parameter list is missing.

版权声明:本站内容均来自互联网,仅供演示用,请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198,我们将在24小时内删除。