0.目录Content
序号NO.
描述Descriptions
页码Page
0
目录content
1
1
引用  Normative reference
3
2
定义Definitions
4
3
流程图Flow chart
8
3.1
C3级防腐流程图Corrosion protection system C3
8
3.2
C4级防腐流程图Corrosion protection system C4
9
3.3
C5级防腐流程图Corrosion protection system C5
10
4
制造工艺MPPManufacturing Process Plan
11
4.1
进料检验Incoming inspection
11
4.2
清洗 Cleaning
16
4.3
非喷砂面保护Nonsand blasting protection
19
4.4
喷砂Sandblasting
reference group
20
4.5
除尘 Dust control
25
4.6
喷锌TSM
27
4.7
TSM修补TSM Repair
30
4.8
拆除工装及螺纹孔保护Fixture remove and thread holes protect
32
4.9
非喷漆面保护Non spraying surface protection
33
4.10
喷雾 Spraying Pre-middle coat
34
4.11
喷涂底漆(如果需要)Sprayingprimer
36
4.12
第一层中漆 Spraying1st. middle coat
38
4.13
第二层中漆Spraying 2nd. middle coat
41
4.14
喷涂面漆Spraying top coat
43
4.15
油漆修补 Paint repair
46
4.16
螺纹孔及光洁面防腐保护thread hole and smooth surface corrosion protection
47
4.17
装卸,运输,存储Handling、transportation and storage
49
附件1
系统应用涂层coating system layer and color
50
附件2
修补系统应用涂层maintenance coating system  layer and colors
54
附件3
油漆固化与复涂间隔时间interval between primer and mid paint
60
附件4
相关文件和表单files and records related
62
1：引用NORMATIVEREFERENCES
ZPS1009606-C01000359Coating systems- Specific technical requir ements涂装系统-特殊技术要求
ZPS1008682-126906，Steel and aluminum constructions-General technical delivery conditions钢和铝结构-技术交货一般条件
PS2362-30456pray metallization to corrosion category C3 for construction parts and surfaces bolted together腐蚀等级C3的喷锌,针对零件和表面螺栓连接的结构
PS2643-10821Paint System Corrosion Class C3 according to EN ISO12944-2.根据ENISO12944-2腐蚀等级C3的喷漆系统
PS 519219-27858Protection against  rust extraction in threaded holes.螺纹孔中的锈的防护
ISO 8501-1Preparation of steel substrates before application ofpaints and related products -- Visual assessment of surfacecleanliness -- Part 1: Rust grades and preparation grades of uncoatedsteel substrates and of steel substrates after overall removal ofprevious coatings;钢材在涂油漆以及有关产品前的基底预处理-表面清洁度的目视测定-第一部分：未涂覆过的钢材基底和全面清除原有涂层后的钢材基底的锈蚀等级和预处理等级。
ISO 8502-3, Preparation of steel substrates before application ofpaint and related products - Tests for the assessment of surfacecleanliness - Part 3:Assessment of dust on steel surfacesprepared for painting (pressure-sensitive tape method);钢材在涂油漆以及有关产品前的基底预处理-表面清洁度的评估测定-第三部分：喷砂后钢板表面灰尘清洁度标准（压敏胶带方法）
ISO 8503-1, Preparation of steel substrates before application ofpaints and related products - Surface roughness characteristics ofblast-cleaned steel substrates - Part 1: Specifications and definitionsfor ISO surface profile comparators for the assessment of abrasiveblast-cleaned surfaces;钢材在涂油漆以及有关产品前的基底预处理-喷射清理钢材的表面粗糙度特性- 第一部分：磨料喷射清理表面粗糙度的ISO评定比较样块的技术要求和定义。

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。