T able of contents
SPECIFICATION ……………………………………………………………………………………… 1LIFTING CAPACITIES
Boom …………………………………………………………………………………………2Stationary on rubber ………………………………………………………………………2Pick & carry …………………………………………………………………………………217.5m Boom ＋6.5m SL Jib …………………………………………………………………317.5m Boom ＋10.25m SL Jib ………………………………………………………………317.5m Boom ＋14.0m SL Jib ………………………………………………………………332.5m Boom ＋6.5m SL Jib …………………………………………………………………532.5m Boom ＋10.25m SL Jib ………………………………………………………………532.5m Boom ＋14.0m SL Jib ………………………………………………………………5Notes for the lifting capacity chart …………………………………………………………7WORKING RANGE …………………………………………………………………………8Minimum path width ……………………
……………………………………………………9Overall view …………………………………………………………………………………
10
ROUGH TERRAIN CRANE
【SPECIFICATION】■CRANE
Description Rough terrain crane with maximum lifting capacity 35 ton
●Crane specification
Maximum rated lifting capacity
7.5m Boom35,000kg ×2.6 m (Parts of line : 10) 12.5m Boom19,000kg×5.0 m (Parts of line : 6) 17.5m Boom17,000kg ×5.0 m (Parts of line : 6) 22.5m Boom12,000kg×6.5 m (Parts of line : 4) 27.5m Boom 9,000kg ×7.0 m (Parts of line : 4) 32.5m Boom 7,000kg ×8.0 m (Parts of line : 4) 6.5m Jib 3,200kg ×76°(Parts of line : 1) 10.25m Jib 2,000kg ×71°(Parts of line : 1) 14.0m Jib 1,350kg ×76°(Parts of line : 1) Rooster4,000kg  (Parts of line : 1)
Boom length7.5m ― 32.5m Jib length  6.5m ― 14.0m
Maximum rated lifting height 33.4m (Boom) 47.3m (jib)
Hoisting
line speed (winch up)Main winch125m / min. (at 4th layer) Auxiliary winch125m / min. (at 4th layer)
Hoisting hook speed (winch up)Main winch(Parts of line; 10) : 12.5m / min. (at 4th layer) Auxiliary winch(Parts of line; 1) : 125.0m / min. (at 4th layer)
High-speed lowering Rope speed Main winch163m / min (at 4th layer) Auxiliary winch163m / min (at 4th layer)
Boom derricking angle-10°― 83°Boom derricking time44s / -10°― 83°Boom extending speed7.5m ― 32.5m / 85s Slewing speed  2.6min-1
T ail slewing radius2,850mm
●Equipment and structure
Boom type Round-shaped, 6-section hydraulically telescopic type
(the 2nd and 3rd boom sections at the same time, the 4th, 5th and 6th boom sections at the same time)
Jib type 3-section hydraulically telescopic type (the 2nd and 3rd jib sections at the same time)
Hydraulic stepless tilting type (offset angles 5°(6.5m jib: 7°) to 60°)
Boom extension/
retraction equipment Two hydraulic cylinders and wire ropes used together
Boom derricking/lowering equipment One hydraulic cylinder of direct acting type with pressure-compensated flow control valve
Jib derricking/lowering
equipment Hydraulic cylinder
Winch system
Main & Auxiliary winches Two units of Single winch, Planetary gear reduction type (built-in negative brake) with Automatic brake, High/Low speed switching system and Hydraulic compensated flow control valve.
Slewing equipment Equipped with Hydraulic motor drive and a planetary gear speed
reducer (built-in negative brake), Free / Lock change-over type Slewing bearing Ball bearing type
Outriggers
Type Hydraulic H-beam type (with float and vertical cylinder in single unit)
Extension
width
6,800mm (Fully extended)
6,300mm (Intermediately extended)
5,200mm (Intermediately extended)
4,200mm (Intermediately extended)
2,310mm (Completely retracted)
Wire rope for hoisting Main winch Diameter: 16mm×Length: 185m Auxiliary winch Diameter: 16mm×Length: 105m
●Hydraulic equipment
Oil pump  4 pumps, plunger and gear type
Hydraulic motor Hoisting
motor Axial plunger type Slewing
motor Axial plunger type
Control valve Double acting with integral check and relief valves
(With Hydraulic compensated flow control valve)
Cylinder Double acting type
Oil reservoir capacity500L
●Safety devices
ACS (Automatic Crane System with Voice alarm),
Slewing automatic stop system, Boom raise / lower dampening function,
Boom extension / retraction dampening function,
Working range limit mode, Outrigger status detector,
Boom derricking / telescoping holding valve,
Jib derricking / telescoping holding valve, Overhoist prevention device,
Drum lock device (on aux. winch), Winch holding valve,
Automatic winch brake, Winch drum roller, Hydraulic safety valves,
Outrigger lock pins, Slewing lock, Slewing warning lamp,
Hydraulic oil temperature warning device,
Hydraulic oil return filter warning device
●Standard equipment
Air conditioner, Working light (on boom, table and cab),
Winch drum turning indication device, Hydraulic oil cooler, Hook for 35 ton,
Hook for 22 ton, Hook for 4 ton
●Operator's cab
Adjustable steering wheel, Adjustable seat,
Power Window(external closing switch),
Front windscreen wiper & washer (2 speed wiper),
Roof window wiper & washer, AM/FM Radio, Step lamp, Floor mat,
Accessory socket (24V), Emergency set
●Optional equipment
ACS outside indicator, PA system, Winch view camera, Door visor,■CARRIER
●Carrier specification
Maximum traveling speed49km/h
Grade ability 55% (computed at G.V.W. = 28.055 kg)
Minimum turning radius
(center of extreme outer tire)
8.2m (2 wheel steer)
4.9m (4 wheel steer)
●Engine
Model Mitsubishi
6M60-TLE3BA
Type  4 cycle, 6 cylinders, water cooled, direct injection turbo-charged
diesel engine with intercooling
Piston displacement7.545L
Max. power200kW at 2,600min-1
Max. torque775N･m at 1,600min-1
Diesel Fuel recommended by KATO must be used
●Equipment and structure
Drive system Switches between 2 wheel drive (4×2) and 4 wheel drive (4×4)
T orque converter Engine mounted 3 elements
1 stage (with lock up clutch)
Transmission Remote mounted full automatic
Number of speeds  4 forward & 1 reverse speed (with High-low selector)
Axles
Front Planetary, drive/steer type
Rear Planetary, drive/steer type
Suspension
Front T aper-leaf spring, Hydraulic locking device with suspension cylinder
Rear T aper-leaf spring, Hydraulic locking device with suspension cylinder Brake system
Service Air-over hydraulic disk brake on 4 wheels
(front and rear independent circuit)
Parking Spring applied, electrically air released parking brake mounted on
front axle, internal expanding type
Auxiliary Exhaust brake, Eddy current retarder, Service brake lock Steering
Full hydraulic power steering,
Completely independent front and rear steering
(with automatic rear wheel steering lock system)
Tire size
Front385 / 95 R25 170E ROAD
Rear385 / 95 R25 170E ROAD
Fuel tank capacity300 L
Batteries(12V-120Ah)×2
●Safety devices
Emergency steering device,
Rear wheel steering lock system (automatic),
Brake fluid leak warning device, Service brake lock, Suspension lock,
Engine overspeed alarm, Electrically retractable side view mirrors,
Left front view camera, Front view camera, Rear view camera,
Right side view mirror on boom with defroster,
Radiator coolant level warning device,
Air filter service warning device, Low air warning device
retractable
●Standard equipment
Centralized lubricating system, Aluminum outrigger plate,
Discharge head lamp, Electrically adjustable side view mirrors
●Optional equipment
Wheel stopper, Way side lamp, Side marker lamp
■GENERAL Dimensions
Overall length9,765mm
Overall width2,620mm
Overall height3,595mm
Wheel base3,650mm
Treads
Front2,170mm
Rear2,170mm
Passenger capacity One person
Gross vehicle
weight
Gross
weight approx. 28,055kg
Front
weight approx. 14,040kg
Rear
weight approx. 14,015kg
● Stow the hooks in place before traveling.
● Before you use this machine, read the precautions in the instruction manual thoroughly to
operate it correctly.
● KATO products and specifications are subject to improvements and changes without notice.
ROUGH TERRAIN CRANE
■LIFTING CAPACITIES
■When outriggers are not used
Unit: Metric ton
Unit: Metric ton Based on I SO 4305
Not exceed 75% of static tipping loads
731-75102000
17.5m Boom ＋10.25m SL Jib
17.5m Boom ＋
14.0m SL Jib
731-75102000
731-75103000
731-75102000
17.5m Boom ＋10.25m SL Jib
17.5m Boom ＋
14.0m SL Jib
731-75102000
731-75103000

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。