Medicinal bottles made of moulded soda lime glass.
[Appearance] Apply an appropriate quantity to observe bottle under a natural light. It should be colorless transparent or brown transparent; the surface should be clean and smooth and without obviously defects; any cracks are not allowed.
[Identification] Linear Thermal Expansion: (7.6~9.0)×10-6K-1(20~300℃). It meets the requirements of the determination of mean linear thermal expansion﹤YBB00202003-2015﹥or the determination of linear thermal expansion﹤YBB00212003-2015﹥.
[Joint Line] : not more than 0.3mm on bottles mouth; not more than 0.5mm on other parts.
[Hydrolytic Resistance of Grains at 121℃]: level 2. It meets the requirements of glass-hydrolytic resistance of glass grains at 121-test method and classification﹤YBB00252003-2015﹥.
[Hydrolytic Resistance of the Interior Surfaces]: level HC3. It meets the requirements of glass-hydrolytic resistance of the interior surfaces at 121-test method and classification﹤YB
B00242003-2015﹥.
[Thermal Shock]: should not be broken after thermal shock test on 42℃. It meets the requirements of the first method of the determination of thermal shock and thermal shock strength﹤YBB00182003-2015﹥.
[Internal Stress]: Optical Path Difference (OPD) is not more than 40mm/mm. It meets the requirements of the determination of internal stress﹤YBB00162003-2015﹥.
[Leaching Content of As, Sb, Pb, Cd]: As is not more than 0.2mg/L; Sb is not more than 0.7mg/L; Pb is not more than 1.0mg/L; Cd is not more than 0.25mg/L. It meets the requirements of the determination of the leaching content of As, Sb, Pb, Cd﹤YBB00372004-2015﹥.
[Vertical Axis Deviation] Should conform to the specifications in Table 1. It meets the requirements of the determination of the vertical axis deviation﹤YBB00192003-2015﹥.
Tab 1 The maximum allowed value of Vertical Axis Deviation
Specification (ml)
≤100
120~350
400~950
1000
Vertical Axis Deviation  amax (mm)
1.5
2.0
2.5
3.2
[Full Capacity] Weigh the empty bottles and fill with water bottles, and weigh again, weight difference of empty bottles and fill with water bottles is full capacity (1g/Room Temperature≈1ml). Big mouth bottles should conform to the specifications in Table 2 and small mouth bottles should conform to the specifications in Table 3.
            Tab 2 The Capacitance Deviation of big mouth bottles            Units: ml
Specification
Full Capacity
Deviation
Specification
Full Capacity
Deviation
10
13
±3
250
285
±11
20
23
300
335
30
35
±4
350
385
40
45
400
435
±12
50
55
±5
450
485
60
65
500
535
80
90
±7
550
600
±13
100
110
600
650
120
130
650
700
140
160
±9
750
800
±15
170
transparent中文翻译190
850
900
200
220
950
1000
            Tab 2 The Capacitance Deviation of big mouth bottles            Units: ml
Specification
Full Capacity
Deviation
Specification
Full Capacity
Deviation
25
30
±3
200
240
±11
50
60
±5
500
600
±13
100
120
±7
1000
1200
±15

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。