Active Charge Power Bank User Manual Version B (866)393-4202 | www.JAR-Systems/Support
#M00007
Last Modified 8-26-2022
Designed in the USA
Made in China
Thank you for your purchase!
Please read this user manual carefully and
keep it for future reference. If you need any assistance, please contact our support team. For a copy of the most up-to-date manual, visit:
www.JAR-Systems/Support
Call: (866)393-4202
Disclaimer: Failure to read, thoroughly understand, and follow
all instructions can result in serious personal injury, damage to equipment, or voiding of factory warranty. Since the use of this information, the equipment connected, and the conditions by which any JAR Systems product is used is beyond the control of JAR Systems, it is the obligation of the owner and/or user to determine the correct and safe use of any equipment and product. T o the extent that the law permits, any liability which may be incurred as a result of the use or future use of a product manufactured or sold by JAR Systems
is limited to the cost of repairing or replacing the failed product or component at the discretion of JAR Systems either within, or outside of warranty periods, and does not extend to any loss or damage which may be caused as a consequence of misuse or failure of the equipment, product or the informati
on contained herein. JAR Systems shall not in any event be liable for economic loss of profits, indirect, special, bodily injuries or consequential damages. Specifications and images are for illustration purposes only. Final product may differ and is subject to change without notice.
Manual Contents
Power Bankactive transport
Diagram . . . . . . . . . . . . . . . . . . . . 2 Specifications . . . . . . . . . . . . . . . . . 2
Technology
USB PD (Power Delivery) . . . . . . . . . . . 3 Quick Charge 3.0 . . . . . . . . . . . . . . . 3 Requirements for USB PD (3)
Getting Started
Charging the Power Bank (3)
Charging a Device (4)
Low-Current Charging Mode . . . . . . . . . 4 Product Use and Care
Warnings . . . . . . . . . . . . . . . . . . . . 5 Warranty . . . . . . . . . . . . . . . . . . . . 5
Charge Non-USB-C Devices
Available Charging Emulators . . . . . . Back
Power Bank
Specifications
Technology
What is USB PD (Power Delivery)
USB Power Delivery is a universal multi-voltage charging standard that enables the maximum functionality of USB.
It provides flexible power delivery bidirectionally, along with data, through a single cable to recharge a wide range of compatible devices safely and efficiently.
What is Required for USB PD
∙ E lectronic devices that have a USB PD compatible port.
(Power bank, laptop, tablet, phone, etc.)
∙ A power source with USB PD compatible port.
(Adapt4 USB-C Charging Station, wall charger, etc.)
∙ A USB PD compatible cable to connect the power source to the electronic device. (USB-C or Thunderbolt cables) What is Quick Charge 3.0?
Quick Charge 3.0 charges compatible devices up to four times faster than conventional charging. It is engineered to refuel devices twice as fast as Quick Charge 1.0 and is up
to 38% more efficient than Quick Charge 2.0. It is backward compatible with Quick Charge 2.0/1.0 devices. Getting Started
Charging the Power Bank
Fully charge the power bank before the first-time use.
∙ C onnect a USB-C cable to a USB PD power source such as the Adapt4 USB-C Charging Station or a wall charger.∙ Connect the other end to the power bank’s USB-C port.∙ T he LED battery level indicator lights will flash white
indicating the power bank is charging.
∙ U nplug the power bank when fully charged, indicated by all LED battery level indicator lights staying solidly white.
版权声明:本站内容均来自互联网,仅供演示用,请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198,我们将在24小时内删除。
发表评论