Powerful Analysis Performance in a Compact Form
Can measure a wide variety of workpieces
Multi-functional analysis system
High accuracy
High Functionality
Realizes a wide measuring range in a compact form
•Max. probing diameter: 11.03"(280mm)•Vertical travel: 11.82"(300mm)•Max. table loading: 55lb(25kg)
Incorporates flexible data analysis software ROUNDPAK
•Graphical measurement results displayed
•Easy to operate thanks to a simplified measurement mode •Part Program Simulation
•Detector features safety switch to prevent damaging collisions  in the z-axis
•High-precision powered column unit can evaluate straightness aswell as cylindricity
•Equipped with D.A.T. mechanism to boost measurement efficiency •Includes a remote control box for easy operation
Compact, but with top-end precision
• Rotational accuracy (Radial): (0.02+6H/10000) μm • Rotational accuracy (Axial): (0.02+6X/10000) μm
• Accuracy assurance: Z axis (Straightness, Parallelism),  X axis (Straightness, Squareness)
The table provides high rotational accuracy (radial 0.02+6H /
10000 μm; axial 0.02+6X/10000 μm), enabling the system to measure flatness and other characteristics, in addition to
roundness/cylindricity, at a level that suits any application.
The RA-1600 has also inherited the D.A.T. (Digital Adjustment Table) mechanism used in top-end devices to make workpiece
centering and leveling quick and easy. The operator simply has to manipulate the digital micrometer heads of the turntable to match the adjustment values displayed on the monitor. Even notched workpieces can be measured accurately.
Centering and leveling operations carried out by using the  D.A.T.* can also be incorporated into the measurement procedure (part program). This prevents human errors when performing centering and leveling, and helps standardize measurement operations executed by the part program.
*Centering and leveling is a manual process guided by the display.
Measurement while tracing is possible through a built-in linear scale in the X-axis. This type of measur
ement is useful when displacement due to form variation exceeds the measuring range of the detector, and contact with the workpiece surface.
Measurement through X-axis tracking
A collision-sensing function has been added to the detector unit (when it is in the vertical orientation) to prevent collision in the Z-axis direction. Additionally, an accidental collision prevention function, which stops the system when the detector displacement exceeds its range, has been added. When an accidental touch is detected, the dedicated analysis software (ROUNDPAK) senses the error and automatically stops the system.
*: See this page for details about the continuous ID and OD measuring function.
The detector-unit holder is equipped with a sliding mechanism, enabling one-touch measurement of a workpiece with a deep conventional standard arm.
at a position sufficiently higher than the workpiece along the Z-axis, and then lowered and positioned to make measurements.
Furthermore, internal/external diameters can be easily measured with the continuous internal/external
diameter measurement function *.
Sliding distance: 112 mm
High-level functions promote greater efficiency
Even if a workpiece cannot be measured by physically rotating it by a full turn due to some obstruction (projection), segments of the circumference can be measured.
Partial circle measurement function
Equipped with a highly accurate turntable that enables simple and accurate centering and leveling of the workpiece
D.A.T. (Digimatic Adjustment Table)
Turntable axiscentering
Initial misalignment of axes
Turntable axis
Workpiece
Workpiece
Initial misalignment of centers at turntable surface
Feed the digital micrometer head of the turntable by the deviation displayed.
Preliminary measurement
Display of misalignments
Simple adjustment Centering/leveling
complete
Centering range: ±5 mm
Leveling range of inclination: ±1º
Preliminary measurement of two cross-sections ’A’ and ‘B’.
A guidance system (D.A.T.) is incorporated into the turntables on the RA-2200DS/DH models to help the operator perform manual centering and leveling smoothly and simply.
Continuous OD/ID measurement function
Continuous internal/external diameter measurement is possible without changing the detector position.
The spiral-mode measurement function combines table rotation and rectilinear action allowing cylindricity, coaxiality, and other measurement data to be loaded as a continuous data set.
Spiral Measurement/Analysis
Spiral-mode cylinder measurement
Safety mechanism provided as a standard feature
Sliding detector-unit holder (Option)
A wide variety of parameters including those for roundness/cylindricity, as well as flatness and parallelism, are provided as standard features. You can visually select these parameters using icons. ROUNDPAK also comes with specialized functions, such as the design value best-fit analysis function, the harmonic analysis function, and a function for
deleted.
Recalculation
Data deletion
Analysis results such as cylindricity and coaxiality can be visually expressed in 3D graphics.
Normal display Wire-frame display Surface-map display Shading display
Patent registered in Japan, USA Patent pending in Europe
Icon View
The customer can create reports in custom formats by specifying how the analysis results will be displayed, as well as the sizes and positions of graphics. The analysis result window can be directly utilized as a layout window. Since the measurement procedure, including the layout information, is saved, the entire process, from measurement start, calculation, result saving, and finally to printing, can be automatically executed.
Roundness/Cylindricity measurement/Analysis software
ROUNDPAK
ROUNDPAK provides simple manipulation using a mouse and icons
Simple operations even with a full set of parameters and analysis functions
Freedom in laying out the graphics and data obtained from measurements
A wide variety of graphics functions
Off-line measurement procedure programming function
Unit: mm
Optional Accessories
Detector holders
2X extension holder: 12AAF203
Auxiliary holder for a large-diameter workpiece: 12AAF204
Sliding detector holder: 12AAL090
*2: Customized special interchangeable styli are available on request. Please contact any Mitutoyo office for more information.

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。