The following quick steps will guide you through testing the absolute bare minimum essentials of your motherboard before installing it into a system chassis. Visual aids are provided to assist you during the following procedures.
To reduce the risk of fire, electric shock, and injury always follow basic safety precautions. It is recommended that you use electrostatic discharge (ESD) countermeasures such as an ESD wrist strap or anti-static mat when handling computer components.
After removing the EVGA nForce 790i SLI  FTW from its packaging, place it on to a nonconductive surface. For example: wood, cardboard box, or an anti-static mat.
EVGA nForce 790i SLI  FTW Visual Guide
c.6
On the power supply, flip the power switch to the
ON position. LEDs will now be lit on the motherboard. Press the onboard Clear CMOS button once then press the green Power Button to begin powering up the system.At this final stage, you should now be greeted with the POST screen on your monitor.
9
Power Button
8
Insert your graphics card into either the PCI-E 2.0 slot or the PCI slot. The type of slot depends on the graphic card
EVGA nForce 790i SLI FTW Quick Install Guide
STEP 1 - Install CPU
Thank you for purchasing an EVGA product.
Please remember to register your product at:
www.evga/register
For the latest drivers and updates for your
product please visit:
www.evga/support/drivers
To visit and search our knowledge base and
product FAQ please visit:
www.evga/FAQ
To visit the EVGA community message
boards please visit:
www.evga/forums
1.  Unlock the socket by pressing
the lever sideways, then lift it up
to a 90o angle.
2.  Lift the load plate.  There is
a protective socket cover on the
load plate to protect the socket
when there is no CPU installed.
3.  Remove the protective socket
cover from the load plate.
(Save this protective piece,
as it is needed whenever
transporting or shipping the
motherboard.)
4.  Align the notches in the CPU
with the notches on the socket.
5.  Lower the CPU straight into
the socket.  Close the lid plate
and engage the socket lever.
6.  The CPU will need a proper
cooling solution, please refer
to the manual that came with
your heatsink for detailed
instructions.
STEP 2 - Install
Memory
STEP 3 - Install
Graphics Card(s)
GPU 1
GPU 2
GPU 3
24 pin ATX power
Floppy
SATA
IDE
SATA ports
1.  This motherboard has three
PCI Express X16 slots.  If you
are installing a single graphics
card use the PCI-E slot closest
to the CPU socket.
(Three)
PCI Express X16 slots.
STEP 4 - Connect
Peripherals
Cables
For more information about  these services as well as our
terms and conditions please visit
www.evga
Gaming ● Imaging ● 3D Video ● Entertainment ● Photos ● Graphics
1.  Now connect your peripheral
devices such as hard drives,
floppy drive, and DVD-ROM
drives to the motherboard.
2.  Next you will connect power
cables to the motherboard and
any other peripherals in your
system.
* Remember to plug in your
register forPCI-E power cables to your
graphics card(s) if necessary.
3.  Connect the front panel
headers and any other headers
that are going to be in use.
1.  This motherboard supports up
to four 240-pin DDR3 memory
modules.  Having matched pairs
is highly recommended for dual
channel configurations.
2.  For dual channel configurations
use DIMM slots 0 and 1, 2 and 3,
or 0 through 3. It is recomended
to use the “Black Slots” if running
in 2 Dimm Mode
* Use matching color slots for
dual channel
Support Premium Services
dvanced RMA
Stepping-Up Your Customer Service
Limited Lifetime Warranty
upon product registration
90 Day Step -U p Program
E V G A A D V A N C E D G R A P H I C S T U N I N G
EVGA Corp    2900 Saturn Street, Suite B  Brea, CA 92821  www.evga
*Not all Premium Services apply
to all products.
24/7*
Tech Support
888 . 881. EVGA
714 . 528. 4500
www.evga/support
*24/7 North America only
10
9

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。