各种错误代码
E_GEOMETRY_AMBIGUOUSPARTTYPE - Static variable in interface com.ry.esriGeometryError(0x8004024c) The operation would result in the creation of a new part, but the type of part to be created was ambiguous.E_GEOMETRY_AUTHORITY_TOO_LONG - Static variable in interface com.ry.esriGeometryError(0x8004026c) The authority parameter is too long.E_GEOMETRY_BAD_SPLIT_DISTANCE - Static variable in interface com.ry.esriGeometryError(0x8004021c) The specified splitting distance is not included in the curve to be split.E_GEOMETRY_BADRELATION - Static variable in interface com.ry.esriGeometryError(0x80040232) The Relate operator couldn't evalute the specified relation expression.E_GEOMETRY_BEZIER_EXTEND_EMBEDDED - Static variable in interface com.ry.esriGeometryError(0x80040243) ExtendEmbedded not implemented for Bezier curves.E_GEOMETRY_BUFFER_DISTANCES - Static variable in interface com.ry.esriGeometryError(0x80040262) There was a problem obt
aining a distance at which to buffer a geometry.E_GEOMETRY_BUFFER_INVALID_BUFFER_DISTANCE - Static variable in interface com.ry.esriGeometryError(0x8004026b) The buffer distance must be a valid floating point number.E_GEOMETRY_BUFFER_INVALID_END_OPTION - Static variable in interface com.ry.esriGeometryError(0x8004026a) The end option used by the BufferConstruction service must be one of: esriBufferFlat, esriBufferRound.E_GEOMETRY_BUFFER_INVALID_SIDE_OPTION - Static variable in interface com.ry.esriGeometryError(0x80040269) The side option used by the BufferConstruction service must be one of: esriBufferLeft, esriBufferRight, esriBufferFull.E_GEOMETRY_BUFFERCONSTRUCTION_INUSE - Static variable in interface com.ry.esriGeometryError(0x80040266) A client has attempted to re-enter a BufferConstruction object while E_GEOMETRY_BUFFERFAILURE - Static variable in interface com.ry.esriGeometryError(0x80040267) An error occurred during the buffer operation.E_GEOMETRY_BUFFEROUTOFBOUNDS - Static variable in interface co
m.ry.esriGeometryError(0x8004023b) The buffer coordinates are out of bounds.E_GEOMETRY_CANNOT_DO_3D_OPERATIONS_ON_CURVES - Static variable in interface com.ry.esriGeometryError(0x80040272) Cannot do 3D operations on curve segments.E_GEOMETRY_CANNOT_EXTRAPOLATE_BY_SEGMENT - Static variable in interface com.ry.esriGeometryError(0x8004025f) No segment available to determine extrapolation ratio.invalidsE_GEOMETRY_CANT_CUT_POLYGON - Static variable in interface com.ry.esriGeometryError(0x80040231) A cut operation could not classify all parts of the polygon as being left or right of the cutting polyline.E_GEOMETRY_CANT_EVALUATE_RELATION_MATRIX - Static variable in interface com.ry.esriGeometryError(0x80040274) Some combinations of geometries with vertical segments cannot be evaluated with a 9DEM relational expression.E_GEOMETRY_CANT_QUERY_ON_VERTEX_ATTRIBUTES - Static variable in interface com.ry.esriGeometryError(0x80040225) Not used.E_GEOMETRY_CANT_RESHAPE - Static variable in interface com.
etry.esriGeometryError(0x8004021e) Not used.E_GEOMETRY_CONSTRUCTPOINTUNION - Static variable in interface com.ry.esriGeometryError(0x80040242) Can't use ConstructUnion on a point.E_GEOMETRY_DEGENERATEGEOMETRY - Static variable in interface com.ry.esriGeometryError(0x80040253) The operation could not be performed because the geometry is degenerate.E_GEOMETRY_DUPLICATESEGMENTPOINTER - Static variable in interface com.ry.esriGeometryError(0x80040255) The same segment has been added to the geometry more than once.E_GEOMETRY_EDITED_REGIONS_OVERLAP - Static variable in interface com.ry.esriGeometryError(0x8004025d) Cannot merge the two geometries.E_GEOMETRY_EDITS_OVERLAP - Static variable in interface com.ry.esriGeometryError(0x80040260) Cannot merge the two geometries.E_GEOMETRY_EMPTYGEOMETRY - Static variable in interface com.ry.esriGeometryError(0x80040202) An operation on an empty geometry was attempted - for example, trying to move or rotate one.E_GEOMETRY_EQU
AL_VERTEX_ATTRIBUTES - Static variable in interface com.ry.esriGeometryError(0x80040223) Not used.E_GEOMETRY_EXTERIORPART - Static variable in interface com.ry.esriGeometryError(0x8004024f) An interior part must be specified.E_GEOMETRY_FILLET_FAILED - Static variable in interface com.ry.esriGeometryError(0x8004022f) The fillet could not be constructed according to specs.E_GEOMETRY_ILLEGALWIN32EXPORT - Static variable in interface com.ry.esriGeometryError(0x80040241) Not used.E_GEOMETRY_INCONSISTANT_DIMENSIONS - Static variable in interface com.ry.esriGeometryError(0x80040229) Input geometries do not have same dimensions.E_GEOMETRY_INCONSISTANT_PARAMS - Static variable in interface com.ry.esriGeometryError(0x80040203) The input parameters could not be reasonably interpreted - for example, asking for the 2d result of a polyline/polygon intersection.E_GEOMETRY_INCONSISTANT_SPATIAL_REFERENCE - Static variable in interface com.ry.esriGeometryError(0x80040215) Input geometries do no
t have same spatial reference.E_GEOMETRY_INPUT_TYPE_INCORRECT - Static variable in interface com.ry.esriGeometryError(0x8004025c) The geometries must be polylines or polygons.E_GEOMETRY_INPUT_TYPE_MISMATCH - Static variable in interface com.ry.esriGeometryError(0x8004025b) The geometries are not all of the same type.E_GEOMETRY_INSUFFICIENT_CONTROLPOINTS - Static variable in interface com.ry.esriGeometryError(0x80040256) The number of control points is insufficient.E_GEOMETRY_INTERIORPART - Static variable in interface com.ry.esriGeometryError(0x80040219) Not used.E_GEOMETRY_INTERNALERROR - Static variable in interface com.ry.esriGeometryError(0x80040239) An internal error has occurred in the geometry system.E_GEOMETRY_INVALID_ANGLE - Static variable in interface com.ry.esriGeometryError(0x8004020d) An arc construction operation was given an invalid angle.E_GEOMETRY_INVALID_AXES - Static variable in interface com.ry.esriGeometryError(0x80040230) An elliptic arc construction oper
ation was given invalid axes.E_GEOMETRY_INVALID_CHORD - Static variable in interface com.ry.esriGeometryError(0x80040205) An arc construction operation was given an invalid chord distance.E_GEOMETRY_INVALID_RADIUS - Static variable in interface com.ry.esriGeometryError(0x80040204) An arc construction operation was given an invalid radius.E_GEOMETRY_INVALIDCONSTRUCTION - Static variable in interface com.ry.esriGeometryError(0x80040246) Not used.E_GEOMETRY_INVALIDCOUNT - Static variable in interface com.ry.esriGeometryError(0x8004024e) The number of items specified is too high or too low in the given context.E_GEOMETRY_INVALIDRINGORDER - Static variable in interface com.ry.esriGeometryError(0x8004024d) The ordering of rings and types is invalid.E_GEOMETRY_INVALIDRINGTYPE - Static variable in interface com.ry.esriGeometryError(0x8004024b) The given ring is not of the required type within the multipatch.E_GEOMETRY_M_OUT_OF_BOUNDS - Static variable in interface com.ry.esriGeometryError(0x80040271) The m coor
dinates of this geometry are out of bounds.E_GEOMETRY_NO_VALID_VERTEX_ATTRIBUTES - Static variable in interface com.ry.esriGeometryError(0x80040226) Not used.E_GEOMETRY_NONENVELOPE - Static variable in interface com.ry.esriGeometryError(0x80040206) Not used.E_GEOMETRY_NONGEOMETRY - Static variable in interface com.ry.esriGeometryError(0x80040221) Something other than a geometry was encountered.E_GEOMETRY_NONMULTIPATCH - Static variable in interface com.ry.esriGeometryError(0x80040249) Something other than a multipatch was encountered.E_GEOMETRY_NONPART - Static variable in interface com.ry.esriGeometryError(0x80040207) Not used.E_GEOMETRY_NONPATH - Static variable in interface com.ry.esriGeometryError(0x8004020e) Not used.E_GEOMETRY_NONPOINT - Static variable in interface com.ry.esriGeometryError(0x80040210) Something other than a point w
as added to a multipoint.E_GEOMETRY_NONPOLYGON - Static variable in interface com.ry.esriGeometryError(0x8004021f) Something other than a polygon was encountered.E_GEOMETRY_NONPOLYLINE - Static variable in interface com.ry.esriGeometryError(0x80040220) Something other than a polyline was encountered.E_GEOMETRY_NONSEGMENT - Static variable in interface com.ry.esriGeometryError(0x8004020f) Not used.E_GEOMETRY_NONTRIANGLEFAN - Static variable in interface com.ry.esriGeometryError(0x80040251) The input interface does not belong to a triangle fan object.E_GEOMETRY_NONTRIANGLESTRIP - Static variable in interface com.ry.esriGeometryError(0x80040250) The input interface does not belong to a triangle strip object.E_GEOMETRY_NONVECTOR3D - Static variable in interface com.ry.esriGeometryError(0x80040252) The input interface does not belong to a 3-dimensional vector.E_GEOMETRY_NOPENDINGMOVETO - Static variable in interface com.ry.esriGeometryError(0x8004023f) The SegmentGraphCursor has no unfinished MoveTo operation.E_GEOMETRY_NOT_BEZIER
CURVES - Static variable in interface com.ry.esriGeometryError(0x80040257) The participating segments must be Bezier curves.E_GEOMETRY_NOT_ID_AWARE - Static variable in interface com.ry.esriGeometryError(0x80040240) The geometry is not ID-aware.E_GEOMETRY_NOT_M_AWARE - Static variable in interface com.ry.esriGeometryError(0x80040235) The geometry is not M-aware.E_GEOMETRY_NOT_M_SIMPLE - Static variable in interface com.ry.esriGeometryError(0x80040245) The geometry has undefined M values for some of its vertices.E_GEOMETRY_NOT_SINGLEPART - Static variable in interface com.ry.esriGeometryError(0x80040273) The reshaping polyline must have one part.E_GEOMETRY_NOT_Z_AWARE - Static variable in interface com.ry.esriGeometryError(0x80040234) The geometry is not Z-aware.E_GEOMETRY_NOT_Z_SIMPLE - Static variable in interface com.ry.esriGeometryError(0x80040244) The geometry has undefined Z values for some of its vertices.E_GEOMETRY_NOTSIMPLE - Static variable in interface c
om.ry.esriGeometryError(0x80040218) The operation cannot be performed on a non-simple geometry.E_GEOMETRY_NULL - Static variable in interface com.ry.esriGeometryError(0x8004021d) A null geometry does not correspond to any ESRI geometry type.E_GEOMETRY_OPERATION_CANCELLED - Static variable in interface com.ry.esriGeometryError(0x80040263) The geometry operation was cancelled.E_GEOMETRY_OUT_OF_BOUNDS - Static variable in interface com.ry.esriGeometryError(0x80040238) The coordinates of this geometry are out of bounds.E_GEOMETRY_OUTOFMEMORY - Static variable in interface com.ry.esriGeometryError(0x8004023c) There is not enough memory.E_GEOMETRY_PARAMETER_TOO_SMALL - Static variable in interface com.ry.esriGeometryError(0x8004026e) An input parameter is too small.E_GEOMETRY_PART_ZS_ARE_NAN - Static variable in interface com.ry.esriGeometryError(0x8004025e) A polygon part has no defined zs.E_GEOMETRY_PARTNOTFOUND - Static variable in interface com.ry.esriGeometryError(0x80040217) The part could not be found in t
he geometry.E_GEOMETRY_PROJECTDATUM - Static variable in interface com.ry.esriGeometryError(0x8004022e) The project method cannot do a datum transformation directly on segments.E_GEOMETRY_RELATIONSYNTAXERROR - Static variable in interface com.ry.esriGeometryError(0x8004023d) The relation expression string has a syntax error.E_GEOMETRY_ROTATEENVELOPE - Static variable in interface com.ry.esriGeometryError(0x80040208) Envelopes cannot be rotated.E_GEOMETRY_SEGMENTGRAPH_CANTLOAD - Static variable in interface com.ry.esriGeometryError(0x80040236) A SegmentGraph can only organize polyline and polygon objects.E_GEOMETRY_SEGMENTGRAPH_CONSTRUCTERROR - Static variable in interface com.ry.esriGeometryError(0x80040237) The geometries could not be topologically structured.E_GEOMETRY_SIMPLIFYFAILED - Static variable in interface com.ry.esriGeometryError(0x8004022c) Something went wrong in Polygon/Polyline simplification.E_GEOMETRY_SR_M_MISMATCH - Static variable in interface com.ry.esriGeometryError(0x8004025a) The geometry is m-aw
are, but its spatial reference has no m domain or resolution defined.E_GEOMETRY_SR_Z_MISMATCH - Static variable in interface com.ry.esriGeometryError(0x80040259) The geometry is z-aware, but its spatial reference has no z domain or resolution defined.E_GEOMETRY_TOLERANCE_TOO_LARGE_FOR_EXTENT - Static variable in interface com.ry.esriGeometryError(0x80040268) The xy cluster tolerance was too large for the extent of the data.E_GEOMETRY_TOOMANYPOINTS - Static variable in interface com.ry.esriGeometryError(0x8004023a) This operation produced too many points.E_GEOMETRY_TRANSFORMATION_UNDEFINED - Static variable in interface com.ry.esriGeometryError(0x80040258) The transformation is undefined.E_GEOMETRY_TRANSFORMENVELOPE - Static variable in interface com.ry.esriGeometryError(0x80040209) Envelopes cannot have arbitrary transformations applied to them.E_GEOMETRY_UNDEFINED_SPATIAL_REFERENCE - Static variable in interface com.ry.esriGeometryError(0x80040227) The operation requires the pres
ence of a spatial reference.E_GEOMETRY_UNDEFINEDRING - Static variable in interface com.ry.esriGeometryError(0x8004024a) The multipatch contains a ring that is invalid or has an undefined type.E_GEOMETRY_UNDERCONSTRAINED - Static variable in interface com.ry.esriGeometryError(0x8004020c) The parameters to a geometric construction did not provide enough information to complete the construction.E_GEOMETRY_UNIT_CONVERSION - Static variable in interface com.ry.esriGeometryError(0x80040261) Cannot convert between linear and angular units.E_GEOMETRY_UNKNOWNERROR - Static variable in interface com.ry.esriGeometryError(0x8004023e) An unknown error has occurred in the geometry system.E_GEOMETRY_UNKNOWNTYPE - Static variable in interface com.ry.esriGeometryError(0x8004020b) The GeometryEnvironment did not know how to create a geometry of the specified type.E_GEOMETRY_WKT_TOO_LONG - Static variable in interface com.ry.esriGeometryError(0x8004026d) The WKT(Z) parameter is too long.E_GEOMETRY_WRONG_RELATION_AND_TYPE - Static variable in interface com.e
ry.esriGeometryError(0x80040265) The specified combination of relation and geometry types is not valid.E_GEOMETRY_WRONGTYPE - Static variable in interface com.ry.esriGeometryError(0x8004020a) The geometry parameter was of the wrong type for the method.E_GEOMETRY_Z_OUT_OF_BOUNDS - Static variable in interface com.ry.esriGeometryError(0x80040270) The z coordinates of this geometry are out of bounds.E_GEOMETRY_ZM_OUT_OF_BOUNDS - Static variable in interface com.ry.esriGeometryError(0x8004026f) The z or m coordinates of this geometry are out of bounds.

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。