FH17-10S-0.5SH中⽂资料
Low Profile 0.5mm Pitch Connectors For FPC
FH17 Series
s Features
1. Low profile 0.5mm pitch FPC connectors
As products become lighter/thinner/shorter/smaller, requests for thinly-made type FPC connectors are rapidly increasing. The FH17Series is an ultra miniature version of the Hirose’s popular FH12Series. FH17 has 35%-45% lower profile above the board.
*FH17: On-board type, height of 1.3 mm from board surface *FH17L : Offset standard type, height of 1.0
mm from board surface *FH17LR : Offset reverse type, height of 1.0 mm from board surface
2. Easy to use Flip-Lock Actuator
Flip-lock (rotating type) ZIF mechanism enables good connectivity of FPC by a simple operation and light force. No board space is required for flip lock operation as compared to slide lock ZIF connectors.
3. Variety of Sizes and Options
In addition to the on-board type (FH17), board drop-in types (FH17L and FH17LR) are also available. Selection will depend on the application mounting. Connectors are available with 8 to 30contacts.
4. Adaptable to thin-type FPC
It conforms to the thin-type FPC (0.17mm )now being used for small size electronic equipment such as cameras, etc. (Thin-type FPC: Specifications without stiffener of double-faced FPC will reduce the cost of FPC. A single-faced FPC still requires stiffener, but the reduced thickness is easier for manufacturers to produce.
5. Packaged for Pick-and-Place machine
Embossed tape packaging allows automatic mounting.
s Applications
Mobile telephones, devices using LCDs, CD-ROMs, cameras, other
miniature devices
FH17L(board drop-in standard type)flip-lock mechanism
FH17LR (board drop-in reverse type) flip-lock mechanism
FH17 (on-board type) flip-lock mechanism
(
s Product Specifications
() s Ordering Information
B Connector Operating Instructions, precautions and recommendations FP
C conductor surface
(Bottom side)
Note The coplanarity of each lead and metal fitting is within 0.1.
On-Board Type (FH17)
2.9
F
E 0.2
0.5
B
A C
D 0.6
1.3
4.3
0.6
Order by number of reels.
1
B Recommended Land/ Metal Mask Dimensions (FH17)
*Recommended metal mask thickness: t = 0.15
(mm)
Order by number of reels.
(0.4)
(3.5)
(0.35)
(0.8)
(1)
(0.3)
(0.3)(0.2)
L
A B
C D
K F
4.55
1.4 (I n c l u d i n g p o l y a m i d e t a p e )
1.2
1.3
2
0.5
Note: The coplanarity of each lead and metal fitting is within 0.1.
Order by number of reels.
(1)
(3.5)
(0.35)
(0.8)
(0.4)
(0.5)
(0.5)(0.2)
L
A B
C D K F
4.55
1.4 (I n c l u d i n g p o l y a m i d e t a p e )
1.2
1.3
2
0.5
Note: The coplanarity of each lead and metal fitting is within 0.1.
Order by number of reels.
Note: The coplanarity of each lead and metal fitting is within 0.1.
B Recommended Land/ Metal Mask Dimensions (FH17L and FH17LR) M±0.1N±0.1P±0.1
B±0.05
0.5±0.05
1.8±0.1
1.8±0.13.65±0.11.5±0.1
0.25±0.03(Metal Mask)
0.3±0.03(Land)* Recommended metal mask thickness: t=0.15
(0.85)
(0.5)
Order by number of reels.
Order by number of reels.
* A combination of polyamide and heat-hardened adhesive should be used for the stiffener material in the case of single-sided FPC. The copper foil of the rear surface should not be used in the case of double-sided FPC.
B Recommended FP
C Dimensions (FH17, FH17L, and FH17LR)
3M I N
0.5±0.05
B±0.050.5±0.1
0.5±0.1
Q±0.07
0.35±0.030.17+0.03
– 0.04
2–R 0.2
B Packaging Specification q Embossed Carrier Tape Dimensions
q Reel Dimensions
(mm)
On-Board Type (FH17)
13
80
330
2
W
Empty section End portion
Mounting portion
Embossed carrier tape Leader area (400mm or more) Empty section Top cover tape
(10 pockets or more)
(10 pockets or more)
Standard Type
Reverse Type
profile中文
q Embossed Carrier Tape Dimensions
13
80
330
2W
Blank portion End portion
Mounting portion
Embossed carrier tape Lead portion (400mm min.) Blank portion Top cover tape
(10 pockets min.)
(10 pockets min.)
(mm)
(mm)
Offset Type (FH17L and FH17LR)
B Recommended Temperature Profile
HRS test conditions
Solder method:Reflow, IR/hot air
(Nihon Den-netsu Co., Ltd.’s
Part Number: SENSBY NR-2)
Environment:Room air
Solder composition:Paste, 63%Sn/37%Pb (Senju Metal Industry, Co., Ltd.’sPart
Number: OZ63-201C-50-9)
Test board:Glass epoxy 40mm∞80mm∞1.6mm thick Land dimensions:On-Board type 0.3mm∞1.0mm Offset type 0.3mm∞1.5mm

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。