史上最全的焊接专业术语中英文对照表，绝对值得收藏备用
小编将网络上众多的参考资料编辑整理，为了方便您的查阅，特将各种专业术语的中英文对照按照焊接方法进行分类。
目录：
一、熔化焊
二、气焊、热剂焊、水下焊
三、钎焊
四、电阻焊摩擦焊爆炸焊扩散焊超声波焊等
五、热喷涂与热切割
六、焊接安全与防护
一、熔化焊
熔接fusion welding
压接pressure welding
焊接过程welding process
焊接技术welding technique
焊接工艺welding technology/procedure
焊接操作welding operation
焊接顺序welding sequence
焊接方向direction of welding
焊接位置welding position
熔敷顺序build-up sequence/deposition sequence
焊缝倾角weld slope/inclination of weld axis
焊缝转角weld rotation/angle of rotation
平焊位置flat position of welding
横焊位置horizontal position of welding
立焊位置vertical position of welding
仰焊位置overhead position of welding
平焊downhand welding/flat position welding
横焊horizontal position welding
立焊vertical position welding
仰焊overhead position welding
全位置焊all position welding
向下立焊vertical down welding/downward welding in the vertical position
向上立焊vertical up welding/upward welding in the vertical position
倾斜焊inclined position welding
上坡焊upward welding in the inclined position
下坡焊downward welding in the inclined position
对接焊butt welding
角焊fillet welding
搭接焊lap weldingsleeve
船形焊fillet welding in the downhand position/fillet welding in the flat position
平角焊horizontal fillet welding
立角焊fillet welding in the vertical position
仰角焊fillet welding in the overhead position
坡口焊groove welding
I形坡口对接焊square butt welding
喇叭形坡口焊 flare groove welding
卷边焊flanged edge welding
纵缝焊接welding of l0ngitudinal seam
横缝焊接welding of transverse seam
环缝焊接girth welding/ circumferential
螺旋缝焊接welding of spiral seam/welding of helical seam
环缝对接焊butt welding of circumferential seam
定位焊tack welding
单面焊welding by one side
双面焊welding by both sides
单道焊single pass welding/single run welding
多道焊multi-pass welding
单层焊single layer welding
多层焊multi-layer welding
分段多层焊block sequence/ block welding
分层多道焊multi-layer and multi-pass welding
连续焊continuous welding
断续焊intermittent welding
打底焊backing weld
封底焊back sealing weld
盖面焊cosmetic welding
深熔焊deep penetration welding
摆动焊welding with weaving/weave bead welding
前倾焊 foreward welding (英国)/ forehand welding (美国)
后倾焊 backward welding(英国)/ backhand welding(美国)
分段退焊backstep welding
跳焊skip welding
对称焊balanced welding/ balanced welding sequence
左焊法leftward welding forehand welding
右焊法rightward welding/backhand welding
挑弧焊whipping method
自动焊automatic welding
手工焊manual welding/hand welding
车间焊接shop welding
工地焊接site welding(英国)/ field welding (美国)
拘束焊接restraint welding
堆焊surfacing/building up/overlaying
隔离层堆焊buttering
端部周边焊boxing/end return
返修焊rewelding
补焊repair welding
塞焊plug welding
槽焊slot welding
衬垫焊welding with backing
焊剂垫焊welding with flux backing
窄间隙焊narrow-gap welding
强制成形焊enclosed welding
脉冲电弧焊pulsed are welding
电弧点焊arc spot welding
螺柱焊stud welding
热风焊hot gas welding
高能焊high grade energy welding
固态焊接solid-state welding
单面焊双面成形one-side welding with back formation
焊接条件welding condition
焊接工艺参数welding parameter
极性polarity
正接electrode negative/straight polarity
反接electrode positive/reversed polarity
运条方式manipulation of electrode
焊接电流welding current
焊接电流增加时间welding current upslope time
焊接电流衰减时间welding current downslope time
电流密度current density
短路电流short circuit current
脉冲电流pulse level/pulse current level
脉冲电流幅值pulse current amplitude
基值电流background level
脉冲频率pulse frequency
脉冲焊接电流占空比duty cycle of pulse duration
电弧电压arc voltage
再引弧电压reignition voltage
焊接速度welding speed
行走速度rate of travel/travel speed
送丝速度wire feed rate
线能量heat input/energy input
热输入heat input
预热preheat
后热postheat
焊后热处理posweld heat treatment/postheat treatment

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。