SPECIFICATION
SPEC.NO.:              REV:    X1
DATE:
PRODUCT NAME:
PRODUCT NO.:
DCC ISS APPROVED CHECKED PREPARED
E NAME
(100 MHz, −20 dB),(5 GHz,−20dB),(10 GHz, −13dB) and (15 GHz,−6 dB).
9Differential
Near-End and
Far-End Crosstalk
Between Super
Speed Pairs
差动近远端串音
测试
The differential crosstalk measures the
unwanted coupling between differential
pairs. Both near-end crosstalk and far-end
crosstalk for mated connector pairs are
specified. The recommended limit is defined
by the following vertices:
在对接的连接器中，D+/D-对以及超高速
对之间的差动近端和远端串音应尽量不
要超过限制，该限制请参考一下的定义：
(100 MHz，-40 dB）
(5 GHz, -40 dB)
(7.5 GHz, 12-36 dB)
EIA-364-90
40 ps (20%-80%) rise time.
40 皮秒(20%-80%)上升时间
typec转dp10 Scd21 Defined by the following vertices:
(100 MHz, -30 dB), (6 GHz, -30 dB),
and (10 GHz, -25 dB).
MECHANICAL REQUIREMENT(机械特性)
11Insertion Force
插入力
The initial connector insertion force shall be
within the range from
5N(0.51 kgf) to 20N (2.04 kgf)
插入力范围
5N(0.51 kgf) 到20N(2.04 kgf).
EIA-364-13
At a maximum rate of 12.5mm (0.492") per
minute.
测试参照EIA-364-13C进行，以每分钟12.5mm
速度，量测插入力
12Withdrawal Force
拔出力
1-1000 Cycles insertion force shall be within
the range from
8N(0.82 kgf) to 20N(2.04 kgf)
1000-10000 Cycles insertion force shall be
within the range from
6N(0.61 kgf) to 20N(2.04 kgf)
1-1000次拔出力范围为8N(0.82 kgf) 到
20N(2.04 kgf)
1000-10000次拔出力范围为6N(0.61 kgf)
到20N(2.04 kgf)
EIA-364-13
At a maximum rate of 12.5mm (0.492") per
minute.
测试参照EIA-364-13C进行，以每分钟12.5mm
速度，量测拔出力

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。