Introduction (1)
Parts.List (1)
Installing.SoundPoint®.IP.430.SIP (2)
Connecting Network and Power Source (2)
Connecting the Handset and Optional Headset (3)
Attaching the Base (3)
Features (5)
Key.Descriptions (6)
Using.SoundPoint®.IP.430.SIP (7)
Placing a Call (7)
Answering a Call (8)
Call Hold and Resume (8)
Multiple Calls on Hold (8)
Microphone Mute (8)
General Key Use (9)
Local Conferencing (9)
Splitting a Conference (9)
Transferring a Call (10)
Call Timer (10)
Ending a Call (10)
Redial (10)
Call Forwarding (11)
Volume Adjustment (11)
Do Not Disturb (11)
Time and Date (12)
Headset Memory Mode (12)
Headset Hookswitch (12)
Display Contrast (12)
Ring Type (13)
Call Lists (13)
Contact Directory (13)
headsetSpeed Dial (15)
Multiple Lines (16)
Multiple Keys per Line (16)
Multiple Call Appearances (17)
Shared Lines (18)
Voice Mail (18)
Distinctive Ringing / Call Treatment (19)
Multilingual Support (Localization) (19)
Phone Reboot (20)
Optional.Features (20)
Text Messaging (20)
Presence / Status / Buddy Lists (21)
Troubleshooting (23)
Safety.and.Compliance (24)
Part 15 Rules (24)
Class B Digital Device or Peripheral (24)
Modifications (25)
Installation Instructions (25)
Plug Acts as Disconnect Device (25)
Industry Canada (IC) (25)
CE & VCCI Mark (25)
Polycom.Limited.Warranty.
and.Limitation.Liability (25)
Exclusions (26)
Warranty.Exclusive (26)
Service.Agreements (26)
Limitations.of.Liability (27)
Disclaimer (27)
Governing.Law (27)
Copyright.Notice (27)
Thank you for choosing SoundPoint®
IP 430 SIP, a full-duplex, hands-free phone.  This unit provides business telephony features and functions such as Multiple Call Appearances, Call Hold, Transfer, and Conference over an IP network.  In this User Guide, you will find everything you need to quickly use your new phone.  Be sure to verify with your system admin-istrator that your network is prepared for configuring your SoundPoint® IP 430
SIP phone.  As well, be sure to read the Parts List, and the Safety Notices section in this guide before you set up the SoundPoint®IP 430 SIP phone.
The following items are included in your SoundPoint® IP 430 SIP package.  Check this list before installation to ensure that you have received each item.  If you are missing any items, please contact your
system administrator. Polycom SoundPoint® IP 430 SIP
Handset & Handset Cord
Network Cable
Power Adapter
(Not shown: Country-specific
AC cord provided)
Phone Base
Quick Start Guide
This section provides basic installation instructions and information for obtaining the best performance with the Sound-Point® IP 430 SIP phone.  If you require additional information or assistance with your new phone, please contact your sys-tem administrator.  The SoundPoint® IP 430 SIP User Guide includes regulatory compliance informa-tion that your system administrator should review.  It can also be found at www. polycom.
AC Power Option
cord to the power adapter.
In-Line Power Option
If the phone is connected to a compatible
Ethernet switch that can provide in-line
power, the phone will use that power op-
tion.  Simply plug the supplied Network
cable between the LAN jack on the phone
and an available Power and Data port on
the In-Line Power switch.
IEEE 802.3af compliant Power
over Ethernet Hub/Switch
(Terminal or Midspan)

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。