发那科后处理器Mastercam
[POST_VERSION] #DO NOT MOVE OR ALTER THIS LINE# V10.00 E1 P0 T1121259927 M10.00 I0
# Post Name : MPFAN
# Product : MILL
# Machine Name : GENERIC FANUC
# Control Name : GENERIC FANUC
# Description : GENERIC FANUC MILL POST
# 4-axis/Axis subs. : YES
# 5-axis : NO
# Subprograms : YES
# Executable : MP v10.0
#
# WARNING: THIS POST IS GENERIC AND IS INTENDED FOR MODIFICATION TO
# THE MACHINE TOOL REQUIREMENTS AND PERSONAL PREFERENCE.
#
# --------------------------------------------------------------------------
# Revision log:
# --------------------------------------------------------------------------
# Programmers Note:
# CNC 07/11/05 - Initial post update for Mastercam X
#
# --------------------------------------------------------------------------
# Features:
# --------------------------------------------------------------------------
# This post supports Generic Fanuc code output for 3 and 4 axis milling.
# It is designed to support some of the features of Mastercam X. This post DOES NOTdelete in
# support reading of the Machine Definition. For Machine Definition support use
# Generic Fanuc 4X Mill.pst.
#
# - Supports X comments including machine name, group name and group comment output (see pcomment2)
# - Variable initialization with CD_VAR are read directly from CD. Changing these initial val
ues
# in the post will not effect output. These values are only processed during the update post routine.
# - Support for 10 additional canned text and new coolant options for X. Coolant supportted through
# existing canned text logic.
# - Support for seperate XY, XZ and YZ plane/arc variables (see Arc page in CD)
# - Additional functionality added to Generic Fanuc 4X Mill.PST - Use this post for more enhanced output.
#
# Following Misc. Integers are used:
#
# mi1 - Work coordinate system
# 0 = Reference return is generated and G92 with the
# X, Y and Z home positions at file head.
# 1 = Reference return is generated and G92 with the
# X, Y and Z home positions at each tool.
# 2 = WCS of G54, based on Mastercam settings.
#
# mi2 - Absolute or Incremental positioning at top level
# 0 = absolute
# 1 = incremental
#
# mi3 - Select G28 or G30 reference point return.
# 0 = G28, 1 = G30
#
#Canned text:
# Entering cantext on a contour point from within Mastercam allows the
# following functions to enable/disable.
# Cantext value:
# 1 = Program Stop = output the "M00" stop code
# 2 = Optional Stop = output the "M01" optional stop code
# 3 = Block Delete on = turn on block delete codes in NC lines
# 4 = Block Delete off = turn off block delete codes in NC lines
#
#Milling toolpaths (4 axis)
#Layout:
# The term "Reference View" refers to the coordinate system associated
# with the Top view (Alt-F9, the upper gnomon of t
he three displayed).
# Create the part drawing with the axis of rotation about the axis
# of the "Reference View" according to the setting you entered for
# 'vmc' (vertical or horizontal) and 'rot_on_x' (machine relative
# axis of rotation).
# vmc = 1 (vertical machine) uses the top toolplane as the base machine
# view.
# vmc = 0 (horizontal machine) uses the front toolplane as the base machine
# view.
# Relative to the machine matrix -
# Rotation zero position is on the Z axis for rotation on X axis.
# Rotation zero position is on the Z axis for rotation on Y axis.
# Rotation zero position is on the X axis for rotation on Z axis.
# The machine view rotated about the selected axis as a "single axis

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。