AHU Site Acceptance Test for AHU11
Project Phase | DQ IQ OQ PQ ____________ |
Project Name | Extension of Film Facility HuaiRou |
Project No. | BJMCFP201003 |
Plant / Building | Huai Rou / PCM2 |
Unit / Equipment | HVAC /AHU11 |
Document Code | BJMC_02_01_AHU11_IQT_AHU_SAT |
Revision | 1.0 |
Approval of Test Scope | ||||
Name | Signature Reason | Department / Function | Date | Signature |
Mark Hu | Author | Project Manager | ||
AHU11 SAT Check List
Check Items | Check Description | Acceptance Criteria | Result | Checked by /Date |
General 总体的检查 | - Check the general state - 检查外观质量 | - Correct manufacture - Correct quantity - Correct module - pulleysVisually clean - No damaged by view - 正确的制造商 - 正确的数量 - 正确的型号规格 - 目视干净 - 目视没有损坏 | ||
Style 型号规格 | - Technology Specification check - 技术参数的检查 | - Meet technology specification which offered by supplier during purchasing. Detailed check list will be attached. - 符合采购期间供应商提供的设备技术参数。一份详细的检查列表附在本文件之后。 | ||
dampers and actuators 风阀和执行器 VH102 VH103 | - Dampers check - Open/close the Dampers by hand - 风阀检查 - 手动开关风阀 | - Visually clean - Leaf no damage - Dampers move easily through the full span - 目视干净 - 风叶没有损坏 - 风阀在满刻度都能顺利开关 | ||
cooling-coil CH101 冷盘管 | - Visually check cleanliness, damage - 目视检查干净,损坏 | - Visually clean, undamaged - 目视干净,无损坏 | ||
Heating section; Electrical heating EH101 | - Visually check cleanliness, damage - Check wire assemble compliance with nation code - 目视检查干净,损坏 - 检查接线装配,符合国家相关规程 | - Visually clean, undamaged - Correct wire assemble compliance with nation code - 目视干净,无损坏 - 接线正确,符合国家相关规程 | ||
Supply Fan/Motor Section FU101,M101 | - Check fan/motor fixation - Check Drive belt tension by squeezing the belt with the thumb and the index finger at the location as shown below - Check the lubrication of the fan - 检查风机马达装配 - 检查马达驱动皮带,指压皮带检查其松紧度 - 检查风机润滑油 | - All fixation elements are tightly installed, vibration isolators was installed with engineering practices. - Pulleys are tightly installed to the fan/motor shafts, align parallel, fixings installed with the good engineering practice - 全部部件安装紧凑,牢固;减震垫安装牢固,无损坏 - 皮带正确地安装在皮带轮上,平行,松紧度合适 - 风机添加了正确的润滑油 | ||
Comments:
Viewed by/Date:
版权声明:本站内容均来自互联网,仅供演示用,请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198,我们将在24小时内删除。
发表评论