计量测量范围的描述
    英文回答：
    Measurement Range.
    The measurement range of an instrument is the span of values that it can accurately measure. It is typically specified as a minimum and maximum value, such as 0 to 100 volts. The measurement range is determined by the design of the instrument, including the type of sensor or transducer used, as well as the signal processing and conditioning circuitry.
    The accuracy of an instrument is usually expressed as a percentage of the measurement range. For example, an instrument with an accuracy of ±2% of the measurement range would have a maximum error of 2% of the full-scale value.
    The measurement range of an instrument is an important consideration when selecting an instrument for a particular application. The instrument should have a measurement range that is appropriate for the values that will be measured, and it should have an accuracy that
meets the requirements of the application.
    中文回答：
    测量范围。
instrument的复数    仪器的测量范围是指其准确测量值的范围。它通常指定为最小值和最大值，例如 0 至 100 伏特。测量范围取决于仪器的设计，包括所用传感器或转换器的类型，以及信号处理和调节电路。
    仪器的准确性通常表示为测量范围的百分比。例如，测量范围准确度为 ±2% 的仪器，其最大误差为满量程值的 2%。
    在为特定应用选择仪器时，仪器的测量范围是一个重要考虑因素。仪器应具有适合于所测量值的测量范围，并且其准确性应满足应用的要求。

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。