DEUTSCHE NORM {
© No part of this standard may be reproduced without the prior permission of
DIN Deutsches Institut für Normung e. V., Berlin. Beuth Verlag GmbH , 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).
June 2005
DIN EN 10293
English price group 11
www.din.de www.beuth.de
10.05 9651147
Continued overleaf.
Document comprises 18 pages.
Steel castings for general engineering uses
English version of DIN EN 10293
Stahlguss für allgemeine Anwendungen
National foreword
This standard has been prepared by ECISS/TC 31 ‘Steel castings’ (Secretariat: France).
The responsible German body involved in its preparation was the Normenausschuss Eisen und Stahl  (Steel and Iron Standards Committee), Technical Committee 11 Stahlguss .
Amendments
This standard differs from DIN 1681, June 1985 edition, DIN 17182, May 1992 edition, and DIN 17205, April 1992 edition, as follows:
a)
DIN 1681:1985-06
1) Steel grades GS200 (1.0449) and GS240 (1.0455) have been included.2) Steel grade GS – 52 (1.0552) has been dropped.
3) The steel names have been changed as follows (with the material numbers left unchanged):
Designation as in DIN EN 10293
Designation as in DIN 1681Name Material number Name Material number GE200  1.0420GS – 38  1.0420GE240  1.0446GS – 45  1.0446GE300
1.0558
GS – 60
1.0558
4) Details regarding chemical composition, mechanical properties, heat treatment and welding oper-ations have been amended.
5) The standard has been editorially revised.
ICS 77.140.80
This standard, together with DIN EN 10213-1 and DIN EN 10213-3,
January 1996 editions, supersedes DIN 17182,
May 1992 edition, DIN 1681, June 1985 edition, and
DIN 17205, April 1992 edition.
b) DIN 17182:1992-05
1) Steel grades GS – 8 Mn 7 (1.5015), GS – 8 MnMo 7 4 (1.5430) and GS 13 MnNi 6 4 (1.6221) have been dropped.
2) The steel names and material numbers have been changed as follows:
Designation as in DIN EN 10293
Designation as in DIN 17182Name Material number Name Material number G17Mn5  1.1131GS – 16 Mn 5  1.1131G20Mn5
1.6220
GS – 20 Mn 5
1.1120
3) Details regarding chemical composition, mechanical properties, heat treatment and welding opera-tions have been amended.
4) The standard has been editorially revised.
c) DIN 17205:1992-04
1) Steel grades GS – 35 CrMoV 10 4 (1.7755), GS – 25 CrNiMo 4 (1.6515) and GS – 33 NiCrMo 7 4 4 (1.6740) have been dropped.
2) 16 additional steel grades have been included.
3) The steel names and material numbers have been changed as follows:
Designation as in DIN EN 10293
Designation as in DIN 17205Name Material number Name Material number G28Mn6  1.1165GS – 30 Mn 5  1.1165G26CrMo4  1.7221GS – 25 CrMo 4  1.7218G34CrMo4  1.7230GS – 34 CrMo 4  1.7220G42CrMo4  1.7231GS – 42 CrMo 4  1.7225G30CrMoV6-4  1.7725GS – 30 CrMoV 6 4  1.6582G35CrNiMo6-6  1.6579GS – 34 CrNiMo 6  1.6582G32NiCrMo8-5-4
1.6570
GS – 30 NiCrMo 8 5
1.6570
4) Details regarding chemical composition, mechanical properties, heat treatment and welding opera-tions have been amended.
5) The standard has been editorially revised.
Previous editions
editorially
DIN 1681: 1925-04, 1929-07, 1942xx-03, 1967-06, 1985-06; DIN 17182: 1985-06, 1992-05; DIN 17205: 1992-04.
Page 2
DIN EN 10293:2005-06
English version
ICS 77.140.80
Management Centre: rue de Stassart, 36 B-1050 Brussels
European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee fü
r Normung
© 2005. CEN – All rights of exploitation in any form and by any means  reserved worldwide for CEN national members.
Ref. No. EN 10293:2005 E
ÈÉË
EN 10293
April 2005
Steel castings for general engineering uses
Aciers moulés d’usage général
Stahlguss für allgemeine Anwen-dungen
This European Standard was approved by CEN on 2005-02-14.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Management Centre or to any CEN member.
The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuani
a, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, and the United Kingdom.
Page 2
EN 10293:2005
Page 3 EN 10293:2005

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。