活性数码印花的工艺流程及注意事项
活性数码印花工艺流程包括设计、打样、调、印刷、烘干、定型等环节。
The process of reactive digital printing includes design, sampling, color matching, printing, drying, and fixing.
设计是活性数码印花的第一步，要根据客户需求和原材料特性进行设计。
Design is the first step of reactive digital printing, and it should be based on customer requirements and the characteristics of raw materials.
打样是将设计图案通过印花设备印在织物上，以便客户确认图案效果。
Sampling is to print the design pattern on the fabric through printing equipment for customer confirmation of the pattern effect.
调是根据客户提交的标准颜卡进行调，确保印花效果满足客户要求。
Color matching is to adjust the color according to the standard color card submitted by the customer to ensure that the printing effect meets the customer's requirements.
印刷是将调好的浆通过数码印花机喷射到织物上，形成图案。
Printing is to spray the color paste through a digital printing machine onto the fabric to form a pattern.
烘干是将印刷好的织物放入烘干机中，使浆彻底干透。
Drying is to put the printed fabric into a dryer to thoroughly dry the color paste.
定型是通过热风或蒸汽进行处理，使浆牢固地固定在织物上，提高牢度。
Fixing is to process the fabric with hot air or steam to firmly fix the color paste on the fabric and improve the color fastness.
在活性数码印花过程中，要特别注意控制印花速度，以保证印花质量。
During the process of reactive digital printing, special attention should be paid to controlling the printing speed to ensure printing quality.
定型时要严格控制温度和时间，避免因热度不够或过高导致浆固定不良。
During fixing, the temperature and time should be strictly controlled to avoid poor fixation of the color paste due to insufficient or excessive heat.
在调过程中，要准确记录下配方和浆用量，以备后续生产需求。
During the color matching process, the formula and the amount of color paste should be accurately recorded for subsequent production needs.
在进行设计时，要考虑到印花设备的印花宽度和重复度，避免设计图案过大或过小。
When designing, the printing width and repetition of the printing equipment should be taken into consideration to avoid designs that are too large or too small.
及时清洁印花设备和相关辅助设备，保持设备正常运转。
Clean the printing equipment and related auxiliary equipment in time to keep the equipment running normally.
定期维护印花设备，确保设备稳定性和印花精准度。
Regularly maintain the printing equipment to ensure equipment stability and printing accuracy.
定型后要对印花织物进行质量检验，确保印花效果符合质量标准。
After fixing, the printed fabric should be inspected for quality to ensure that the printing effect meets quality standards.
对印花织物进行水洗和摩擦测试，以检验印花牢度。
Conduct water washing and friction tests on the printed fabric to test the color fastness.
活性数码印花工艺需要严格控制印花环境温湿度，以保证印花效果稳定。reactive to
Reactive digital printing process requires strict control of printing environment temperature and humidity to ensure stable printing effect.

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。