英文原文
How Light Emitting Diodes Work
Light emitting diodes, commonly called LEDs, are real unsung heroes in the electronics  world. They do dozens of different jobs and are found in all kinds of devices. Among other things, they form the numbers on digital clocks, transmit information from remote controls, light up watches and tell you when your appliances are turned on. Collected together, they can form images on a jumbo television screen or illuminate a traffic light. Basically, LEDs are just tiny light bulbs that fit easily into an electrical circuit. But unlike ordinary  incandescent bulbs, they don't have a filament that will burn out, and they don't get especially hot. They are illuminated solely by the movement of electrons in a semiconductor material, and they last just as long as a standard      transistor. In this article, we'll examine the simple principles behind these ubiquitous blinkers, illuminating some cool principles of electricity and light in the process.
What is a Diode? A diode is the simplest sort of semiconductor device. Broadly speaking, a  s
emiconductor  is  a  material  with  a  varying  ability  to  conduct  electrical  current. Most semiconductors are made of a poor conductor that has had impurities (atoms of another material)  added to it. The process of adding impurities is called doping. In the case of LEDs, the conductor  material is typically aluminum-gallium-arsenide. In pure aluminum-gallium-arsenide, all of the atoms bond perfectly to their neighbors, leaving no free electrons (negatively-charged particles) to conduct electric current. In doped material, additional atoms change the balance, either adding free electrons or creating holes where electrons can go. Either of these additions make the material more conductive. A semiconductor with extra electrons is called N-type material, since it has extra negatively-charged particles. In N-type material, free electrons move from a negatively-charged area to a positively charged area. A semiconductor with extra holes is called P-type material, since it effectively has extra positively-charged particles. Electrons can jump from hole to hole, moving from a negatively-charged area to a positively-charged area. As a result, the holes themselves appear to move from a positively-charged area to a negatively-charged area. A diode comprises a  section of N-type  material bonded to a section of P-type materi
al, with electrodes on each end.    This arrangement conducts electricity in only one direction. When no voltage is applied to the diode, electrons from the N-type material fill holes from the P-type material along the junction

between the layers, forming a depletion zone. In a depletion zone, the semiconductor material is    returned to its original insulating state -- all of the holes are filled, so there are no free electrons or empty spaces for electrons, and charge can't flow. To get rid of the depletion zone, you have to get electrons moving from the N-type area to the P-type area and holes moving in the reverse direction. To do this, you connect the N-type side of the diode to the negative end of a circuit and  the P-type side to the positive end. The free electrons in the N-type material are repelled by the    negative electrode and drawn to the positive electrode. The holes in the P-type material move the  other way. When the voltage difference between the electrodes is high enough, the electrons in the depletion zone are boosted out of their holes and begin moving freely again.As a result, the depletion zone dis
appears.When the negative end of the circuit is hooked up to the N-type layer    and the positive end is hooked up to P-type layer, electrons and holes start moving. If the P-type  side is connected to the negative end of the circuit and the N-type side is connected to the positive end, current will not flow. No current flows across the junction because the holes and the electrons are each moving in the wrong direction. When the positive end of the circuit is hooked up to the    N-type layer and the negative end is hooked up to the P-type layer, the depletion zone gets bigger. The interaction between electrons and holes has an interesting effect -- it generates light! In the    next section, we'll find out exactly why this is.
How Can a Diode Produce Light? Light is a form of energy that can be released by an atom. It is made up of many small particle-like packets that have energy. These particles, called photons, are the most basic units of light. Photons are released as a result of moving electrons. In an atom,  electrons move in  orbitals  around the nucleus. Electrons in  different orbitals have  different amounts of energysort of中文翻译. Generally speaking, electrons with greater energy move in orbitals farther away from the nucleus. For an electron to jump from a lower orbital to a higher orbital, something has to boost its energy level. Conversely, an el
ectron releases energy when it drops from a higher  orbital to a lower one. This energy is released in the form of a photon. A greater energy drop releases a higher-energy photon, which is characterized by a higher frequency. As we saw in the    last section, free electrons moving across a diode can fall into empty holes from the P-type layer.  This involves a drop from the conduction band to a lower orbital, so the electrons release energy    in the form of photons. This happens in any diode, but    you can only see the photons when the    diode is composed of certain material. The atoms in a standard silicon diode, for example, are

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。