GETTING  READY
1、The first use , please turn on the panic button of the saftey box.
2、Embed the battery correctry and them press the an button after lid the battery holder , so the digital tablet go to work.
3、Press “ # ” open the computer screen , use pndcct key (personal key 1234 , manage key 123456) , confirm with “ # ” electromagnet pipette , screen shown “ open ” please turn right around the key and the handle within 6 second , open the box door (turn right around the key if it have not the handle )
4、External power and emergency key is used for sparee parts and emergency open , please keep outside , don’t keep the box inside.
DIGITAL CODE SETTING
1、Personal code set up : press“ # ”open the screen , use the right personal key “1234”press
“ # ” confirom , the scveen shouned “ open ” the code is right , electromagnet pipette , press “ * ” within 6 second , go into the coad revise condition , and the screen showned . “ –– ” , you can set up the personal code , eight number code , after make the code , press “ # ” confirm the screen show  “ INTO ” , the code revise succeed.
2、Manage code set up : press “ # ” open the screen , make the right manage code “ 123456 ” , press “ # ” confirm , and the other operation is same from above.
Example : → 1234 → # → * → 111111 → #
A CUE : when code setting is over , demonstrate the two groups of pass word repectively , making sure there is no wrorg and then lock the saftey box.
OPEN / CLOSE
● Open
1、Open the door .
2、Press “#” kin , on screen “––” .
3、Enter any of you set a correct password , press “#” kin recognition , as the input is correct , “OPEN” , while solenoid pull . 6 seconds to turn the handle in the open the door . (no handle to pull the right key to turn the door locks )
●Close
  1、Close the door .
  2、Turn the handle .
  3、Turn the key lock to the limit and pull .
  TIP: Be sure to pull out the drawer before closing the key .
OPEN RECORDS INQUIREtablet screen
1、Input the right passwords , when the “ open” on the display screens disappear and blue black light is stiu on press the “o ” button.
2、Screen shows the last time opening the door , first to display the date , and then the time , show use which passwords to open the door , “ Pass 1 ” for personal code open , “Pass 2 ” for admin passwords .
3、When the “ Pass 1 ” or “ Pass 2 ” on the screen is stiu indisappea press the “ o” button , the screen will show the last time opening the door . and so on . You can inquire the records 14 time.
VIBRATION ALARM SETTING AND CONTACTS / INJECTION FUNCTION
● Vibration alarm setting and contacts
Hidden code function in the sleep state , press “o” health once on screen “BELL ON”and enter a state of alert , the alarm will be safe by the shock . Alarm , enter the correct password screen display “open” pull solenoid 6 seconds , alert automatic discharge . If you do not enter the correct password , the alarm stops automat ically after one minute , but the alert does not lift
● Injection function
The press “#” health wake up the computer board , enter the password before the press “*”health once were passwords do not display numbers , open the door automatically return to do not hide the figures .
CALENDAR SETTINGS/REPLACE THE BATTERY
● Calendar settings
(1) When power is first , year、month、day and time for the 00-01-01 and 00-00,respectively.
(2) In sleep mode , press the “*” health , the display flashes the yesr ,month , day 00-01-01 .
(3) Respectively , enter the year , month , day , week , hour , minute after the backlight corresponding to the number of lights 5 seconds and then automatically switch to sleep time is displayed.
(4) If the operation is interrupted for 6 seconds , the system automatically switches to sleep in the original time.
● Replace the battery
  The computer board using four 1.5v alkaline battery , when battery capacity is less than 20% , open the door when the screen display “Lo-BATTE” , said under-voltage , battery label be reduced, , to temind you to replace the battery.
EMERGENCY OPEN / PASSWORDS RESET
● Emergency open
A、 When electricity shortage ,  plug the . external power supply in socket , open the door correctly and change the battery .
B、 If the electronic password system is broken down or passwoeds are forgot , open the cover of emergency lock and use the key to open the emergency lock turn on the main lock and twirl the hand shank to open the door .
● Passwords reset
If forget the passwords , open the door with the emergency key , press the am button behind the door system restore factory settings .

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。