Wi-Fi Connection Guide
High Definition Video Camera
Model No. HC-X920/HC-X920M
HC-V720/HC-V720M HC-V520/HC-V520M
VQC9464
It is required to install the “Image App” on your smartphone/tablet to connect this unit.
1
[Android ™]: Select “Google Play™ Store”.[iOS]: Select “App Store SM ”.
2Enter “Image App” into the search box.3
Select “Image App” and install it.
Install the “Image App” on your smartphone/tablet Confirm the Wi-Fi ® connection method Connect to Wi-Fi
Step.1tablet screen
Install the “Image App” on your smartphone/tablet
An environment that can connect to the network is required.
Step.2
Confirm the Wi-Fi ® connection method
Confirm the wireless access point and smartphone used.
When connecting to a wireless access point (wireless LAN router)
When connecting to a smartphone
1Check if the wireless access point is compatible with IEEE802.11b/g/n.
≥Proceed to step 2 once the compatibility is confirmed.
2
Check if the wireless access point is compatible with WPS*.
Compatible with WPS:
Proceed to A  [Easy Connection (WPS)] of Step.3
Not compatible with WPS:
Proceed to B  [Manual Connection] of Step.3
*WPS is an abbreviation for Wi-Fi Protected Setup™.Proceed to C  [Direct Connection] of Step.3
≥Android and Google Play are trademarks or registered trademarks of Google Inc.≥App Store is a service mark of Apple Inc.
≥“Wi-Fi”, “Wi-Fi Protected Setup”, “WPA” and “WPA2” are marks or registered marks of the Wi-Fi Alliance.≥
QR Code is a registered trademark of DENSO WAVE INCORPORATED.
A  [Easy Connection (WPS)]
1Press the Wi-Fi button on this unit to setup the Wi-Fi.
2Touch a Blank row to register a new wireless network.
3Touch [Easy Connection (WPS)].
4Press the WPS button on the wireless access point.
≥When the connection is complete, a message is displayed on this unit.
5
Touch [Link to Cell] and start up the smartphone application “Image App”.
≥When the connection is complete, images from this unit are displayed on the smartphone screen.
B  [Manual Connection]
≥Please refer to the operating instruction of the device in use for details about the setting and display of the wireless access point.
1Press the Wi-Fi button on this unit to setup the Wi-Fi.
2
Touch a Blank row to register a new wireless network.
3Touch [Manual Connection].4
Touch [Search for wireless network].
≥For more details about [Manual Setting], please refer to the owner’s manual (PDF format) of this unit.
5Touch the wireless access point to connect.6
Touch [ENTER].
≥If an Encryption key (Password) is not set on your router, the connection is complete and a message is displayed.
7
(When there is an Encryption key (Password))Touch [INPUT], then enter the Encryption key (Password) of the wireless access point.
≥For details on how to enter characters, refer to the owner’s manual (PDF format).
≥When the entry is complete, touch [Enter].
8(When there is an Encryption key (Password))Touch [NEXT].
≥A message is displayed when the connection is complete.
9
Touch [Link to Cell] and start up the smartphone application “Image App”.
≥When the connection is complete, images from this unit are displayed on the smartphone screen.
C  [Direct Connection]
1Press the Wi-Fi button on this unit to setup the Wi-Fi.
2Touch [Change connection type].3
Touch [QR code].
≥The QR code is displayed on this unit screen.
4Start up the smartphone application “Image App”.5
Scan QR code displayed on this unit with the smartphone.
≥When using an iOS device, the profile install screen will be displayed on the smartphone. After installing, close the displayed screen by pressing the Home button and start up “Image App” again.
≥When the connection is complete, images from this unit are displayed on the smartphone screen.
This function can be used with the NFC compatible device with Android (OS version 2.3.3 or later).  (Except for some models)
NFC is an abbreviation for Near Field Communication.
≥When this unit and the smartphone are connected to the same wireless access point, the result is a wireless access point connection. All others are direct connections.
1Start up the smartphone application “Image App”.2
Touch the smartphone on displayed on the smartphone screen.
≥Proceed with the connection by following the smartphone screen instructions.
≥When the connection is complete, images from this unit are displayed on the smartphone screen.
≥The NFC function cannot be used on the smartphone when a message to touch the NFC mark of the device is not displayed. Try other connection methods.
The setting screen for the wireless access point is displayed when the Wi-Fi button is pressed for the first time.
When connecting to a wireless access point (wireless LAN router)
[Wi-Fi Setup] # [Wireless Settings][Wi-Fi Setup] # [Wireless Settings]
A [Delete]B
[ENTER]
A [Delete]B
[ENTER]
When connecting to a smartphone
[Wi-Fi Setup] # [Direct Connection]
Connect with using NFC
HC-V720/HC-V720M/HC-V520/HC-V520M

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。