2
IMPORTANT SAFEGUARDS
1. Read all instructions.
2. This appliance is not intended for use
by persons with reduced physical,
sensory, or mental capabilities, or lack of
experience and knowledge, unless they
are closely supervised and instructed
concerning use of the appliance by a
person responsible for their safety.
3. This appliance shall not be used by
children. Keep the appliance and its cord
out of reach of children.scraper
4. Close supervision is necessary when any
appliance is used near children. Children
should be supervised to ensure that they
do not play with the appliance.
5. T o protect against risk of electrical shock,
do not put cord, plug, base, or motor in
water or other liquid.
6. T urn the appliance OFF (); then unplug
from the outlet when not in use, before
assembling or disassembling parts, and
before cleaning. T o unplug, grasp the
plug and pull from the outlet. Never pull
from the power cord.
7. Avoid contact with moving parts.
8. Do not operate any appliance with a
damaged supply cord or plug, or after
the appliance malfunctions or has been
dropped or damaged in any manner.
Supply cord replacement and repairs
must be conducted by the manufacturer,
its service agent, or similarly qualified
persons in order to avoid a hazard. Call
the provided customer service number
for information on examination, repair, or
adjustment
9. The use of attachments, including
canning jars, not recommended or sold
by the appliance manufacturer may
cause a risk of injury to persons.
10. Do not use outdoors.
11. Do not let cord hang over edge of
table or counter or touch hot surfaces,
including stove.
12. Do not place on or near a hot gas or
electric burner, or in a heated oven.
13. Keep hands and utensils, other than the
tamper provided, out of container while
blending to reduce the risk of severe
injury to persons or damage to the
blender. The cover must remain in place
when using the tamper through the
cover opening.  A scraper may be used
but must be used only when the blender
is not running.
14. Blades are sharp; handle carefully—
especially when emptying or cleaning
the blender jar.
15. Do not use a broken, chipped, or
cracked blender jar.
16. Do not use broken, cracked, or loose
cutting blade assembly.
17. Always operate blender with Lid in place.
Remove emulsion cup only for adding
ingredients or to insert the tamper.
Issue Code(s):
Request #:
Title:
Scale:1:1
Color Key:
Colors represented are for reference only.
See appropriate color standards for color match.
Color Name      Color Description & No.
Operation Warning / Agency Bran
Revision Description:
Graphics Approval Form
Document #:
Revision Date:
REFERENCE INFORMATION (DO NOT PRINT)
4421 Waterfront Drive
Glen Allen, V A 230601/22/2019
DOC9593
PRODUCTION RELEASE.
Lid Instruction Caution, single col See Product Definition Specification for color/application process.
18. When blending hot liquids, remove
emulsion cup and close any edge
cover opening intended for pouring. T o
prevent possible burns: Do not exceed
1000-ml level. Hot liquids may push off
Lid during blending; therefore, with the
protection of an oven mitt or thick towel,
place one hand on top of the Lid, keep
exposed skin away from the Lid, and
start blending at lowest speed.
19. Ensure cutter assembly is tight and
secure to jar. Injury can result if moving
blades accidentally become exposed.
20. Do not leave blender unattended while it
is operating.
21. Check that the appliance is OFF ()
before plugging cord into wall outlet. T o
disconnect cord, switch to OFF (). Then
remove plug from wall outlet. T o unplug,
grasp the plug and pull from the outlet.
Never pull from the power cord.
22. Do not use appliance for other than
intended purpose.
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:
3
Other Consumer Safety Information
This product is intended for household use only.
The length of the cord used on this appliance was selected to reduce the hazards of becoming tangled in or tripping over a longer cord. If a longer cord is necessary, an approved extension cord may be used. The electrical rating of the extension cord must be equal to or greater than the rating of the appliance. The extension cord must be a grounding-type, 3-wire cord. Care must be taken to arrange the extension cord so that it will not drape over the countertop or tabletop where it can be pulled on by children or accidentally tripped over.If the cutting blade assembly locks and will not move, it will damage the motor. Do not use. Call customer service number for information.Do not place blender jar in the freezer filled with food or liquid. This can result in damage to the cutting blade assembly, jar, blender, and possibly result in personal injury.When using a new blender, the motor will sometimes give off a burning smell. This is not a sign of a problem. However, if you are concerned about the motor smell or have a question, please call us via our customer service number at 400-852-2655.
SAVE THESE INSTRUCTIONS
NOTE: This machine is equipped with motor overload protection. If the motor stops during operation due to overheating, unplug and allow it to cool down for approximately 15 minutes. Plug machine back in to resume normal operation.
23. CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer , or connected to a circuit that is regularly switched on and off by the utility.24. Be careful if hot liquid is poured into the blender container as it can be ejected out of the appliance due to a sudden steaming. 25. In manual mode do not exceed normal operating cycle of 2 minutes on and 1 minute OFF . In smoothie and soy milk mode, allow appliance to cool for 2 minutes between each cycle. In hot soup mode, allow appliance to cool for 10 minutes between each cycle.
RESET/OFF (Power) (I/Circuit Breaker (on side of Base)Blender Base
Lid
Emulsion Cup
Tamper START/STOP  (Cutting  Blade Assembly
PULSE  ) Button
Program Buttons (4)
Variable Speed Dial Jar Pad
Speed Indicator Lights
5RESET/OFF (I/) (Power) Switch/Circuit Breaker: The RESET/OFF (I /) (Power) Switch is located on the right-hand side of the Blender Base. This switch controls power to the Blender . This switch is also a circuit breaker that, if tripped, must be turned off and back on to reset.
Control Panel Emulsion Cup: The Emulsion Cup helps create dressings and sauces that require slowly adding liquid ingredients into the Blender Jar while the Blender is in operation.
Lid: The Lid is easy to put on, take off, and clean. Always use the Lid and the Emulsion Cup when the machine is in operation.
Blender Jar: Volume measures are clearly marked.
T amper: The T amper helps mix thick or frozen recipes that cannot be processed with regular blending. It prevents air pockets from forming and is a handy tool when making nut butters or frozen desserts.
Automatic Overload Protection: This machine is equipped with motor overload protection. If the motor stops during operation due to overheating, unplug and allow it to cool down for approximately 15 minutes. Plug machine back in to resume normal operation.
PULSE () Button: Press and hold down the PULSE () Button to blend at the speed setting shown on the VARIABLE SPEED DIAL in MANUAL mode.
Variable Speed Dial: The Variable Speed Dial can be adjusted to the desired speed when blending in Manual mode. The Speed Indicator Light(s) will illuminate to show the selected speed.
Program Buttons: There are four program settings: HOT SOUP  (), SMOOTHIE (),SOY MILK (), and WHOLE JUICE (). Select the desired program by pressing the button for that program. The Speed Indicator Light(s) will illuminate to show the programmed speeds.
START/STOP () Button: The START/STOP () Button is used to begin or end the MANUAL mode or to stop a program before the cycle ends.

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。