整备班皮带工作检查记录表
MAINTENANCE SHIFT CONVEYOR CHECK ROCORD
工作区域
Working Area
检查项目
Items To Be Checked
保养周期
Frequency
检查结果
Result
Yes
No
1# TBM
主机皮带
皮带表层是否有破损
IF THE BELT SURFACE IS DAMAGED
1/
DAILY
橡胶托辊是否有卡死磨损
IDLER WEAR OUT OR JAMMED
1/
DAILY
主皮带下方积渣清理
UNDER-BELT MUCK CLEARING
视情况而定
Depending on
the situation
压力传感器处积渣处理
TENSION SENSOR MUCK CLEARING
1/
DAILY
驱动滚是否正常转动
DRIVE ROLLER RUNNING NORMALLY
1/
DAILY
刮渣板(含自制的)是否调节(2个)
BELT SCRAPER ADJUSTING2 PCS
1/
DAILY
皮带偏移情况是否正常
BELT DEVIATED
1/
DAILY
黄油润滑(黄油嘴: 2个)
GREASING (GREASING POSITIONS: 2)
2/
WEEKLY
scraper2# TRANSFER
传送皮带
皮带表层是否有破损
SURFACE DAMAGE TO THE BELT
1/
DAILY
托辊是否有卡死磨损
IDLER WEAR OUT OR JAMMED
1/
DAILY
托辊支架是否磨损
IDLER BRACKET WEAR OUT
1/
    DAILY
电机风扇的清洁的完成
MOTOR FAN CLEANING
1/
DAILY
移动尾端液压站油位是否正常
MOBIL REAR END HYDRAULIC STATION OIL POSITION NORMAL
1/
    DAILY
移动尾端液压油清洁度是否正常
MOBIL REAR END HYDRAULIC
STATION CLEANING NORMAL
1/
DAILY
溜渣槽护皮、钢板是否磨损
IF THE BELT,STEEL PLATE FOR THE MUCK SHUTE WORN OUT
1/
DAILY
刮渣板(含自制的)是否调整 4个)
BELT SCRAPER ADJUSTING4 PCS
1/
    DAILY
皮带底部石渣是否清理
UNDER-BELT MUCK CLEARING
1/
DAILY
皮带偏移情况是否正常
BELT DEVIATED
1/
DAILY
皮带张紧情况是否正常
BELT TENSION NORMAL
1/
DAILY
黄油润滑(黄油嘴: 14个)
GREASING (GREASING POSITIONS: 14)
1/
WEEKLY
驱动电机黄油润滑(数目:1
DRIVE MOTOR GREASING(POSITION: 1)
1/
THREE MONTH
    3# TUNNEL
    连续皮带
皮带表层是否有破损
SURFACE DAMAGE TO THE BELT
1/
DAILY
U型托辊、回程托辊是否有卡死磨损
U TYPE IDLER AND RETURN IDLER WEAR OUT OR JAMMEDU
1/
DAILY
驱动电机变速箱油位检
DRIVE MOTOR GEAR BOX OIL    POSITION CHECK
1/
    DAILY
皮带架支腿螺栓是否松动脱落
BELT FRAME SUPPORT BOLT        LOOSE OR LOST
1/
DAILY
电机风扇的清洁
DRIVE MOTOR FAN CLEANING
1/
DAILY
黄油润滑(黄油嘴:14
GREASING (GREASING POSITIONS: 14)
1/
WEEKLY
皮带仓黄油润滑(黄油嘴: 36个)
BELT CASSETTE GREASING    POSITIONS: 36
1/
WEEKLY
皮带是否偏移
BELT DEVIATED
1/
DAILY
卷扬机工作状态是否正常
WINCH WORKING PROPERLY
1/
DAILY
卷扬机钢丝绳的是否保养润滑
WINCH STEEL WIRE LUBRICATION
1/
WEEKLY
刮渣板是否调整
BELT SCRAPER ADJUSTING
1/
DAILY
配电柜是否清理
CONTROL CABINET CLEANING
1/
DAILY
驱动电机黄油润滑(数目:
DRIVE MOTOR GREASING(POSITION:4)
1/
THREE MONTH
皮带仓支架滚轮黄油嘴20
BELT CASSETTE BRACKET IDLER GREASING (POSITIONS:20)
1/
WEEKLY
硫化接头的结合情况
CHECK VULCANIZED POSITION ON BELT
1/
DAILY
4# INCLINE
斜皮带
U型托辊、回程托辊是否有卡死磨损
U TYPE IDLER AND RETURN IDLER WEAR OUT OR JAMMEDU
1/
DAILY
电机风扇的清洁
MOTOR FAN CLEANING
1/
DAILY
黄油润滑(黄油嘴:12
GREASINGPOSITIONS12
1/
WEEKLY
顶端防渣板处石渣是否清理
TOP MUCK PROTECTION PLATE CLEARING
1/
DAILY
皮带是否偏移
BELT DEVEATED
1/
DAILY
皮带张紧情况是否正常
BELT TENSTION NORMAL
1/
DAILY
变速箱油位是否正常
GEAR BOX OIL POSITION NORMAL
1/
DAILY
刮渣板(含自制的)是否调整
BELT SCAPER ADJUSTING
1/
DAILY
驱动电机黄油润滑(数目:
DRIVE MOTOR GREASING(POSITION:1)
1/
THREE MONTH
悬挂机构是否正常
SUSPENSITON MECHANISM WORKING PROPERLY
1/
DAILY
5备件清点
SPARE PARTS REQUIRED
备注
REMARKS
Signature: MOR18:            TRC Manager            Supervisor:              Date:
                                                               
 

版权声明:本站内容均来自互联网,仅供演示用,请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198,我们将在24小时内删除。