Do More Nighthawk X6
WiFi Network Name and Password
The preassigned WiFi network name (SSID) and password (network key) are unique to your router, like a serial number. Because the router automatically uses WiFi security, you don’t need to set it up. The WiFi settings are on the label on the router.
We recommend that you use the preassigned WiFi settings because you can check the label if you forget them. You can also log in to the router to change these settings. If you do so, write down the new WiFi settings and store them in a safe place.
You can write the WiFi settings from the label on your router in this space for easy reference. If you change the WiFi settings, write the new settings here for easy reference and store this booklet in a safe place.
WiFi network name (SSID):
Network key (password):
Join the WiFi Network
You can either use Wi-Fi Protected Setup (WPS) or select your router’s WiFi network and type its pa
ssword.
Join the WiFi Network Using WPS
For help with the WPS button on your computer or WiFi device, check the instructions or online help that came with that computer or device. Some older equipment cannot use WPS.
¾To join the network using WPS:
1. Press the WPS button on the router for three to five seconds.
The WPS LED on the router blinks.
2. Within two minutes, on your computer or other WiFi device, press its
WPS button or click its onscreen WPS button.
The WPS LED on the router lights solid white when the computer or WiFi device connects to your router.
3. Repeat this process to add other computers or WiFi devices.
Join the WiFi Network Using the Router’s WiFi Settings
Use the router’s WiFi network name and password to connect your computer or WiFi device to the router’s network through WiFi. If you did not change the router’s WiFi network name and password, use the router’s preassigned WiFi network name and password, which are on the label on the router.
¾To select your network and enter its password:
1. On your computer or other WiFi device, open the WiFi connection
manager that manages your WiFi connections.
The WiFi connection manager scans for WiFi networks in your area. 2. Find and select your router’s WiFi network name (SSID).
The SSID is on the label on the router.
3. Enter the router’s password (or your custom password if you changed
it) and click the Connect button.
The password is on the label on the router.
4. Repeat Step 1 through Step 3 to add other computers or WiFi devices.connect和join的区别
View or Change the Router Settings
After you use the NETGEAR installation assistant to set up the router, you can log in to the router to view or change its settings.
Log In to the Router
¾To log in to the router:
1. Connect a computer or WiFi device to the router.
You can connect using a wired connection or a WiFi connection:
• To connect using a wired connection, use an Ethernet cable (not included) to connect an Ethernet port on your computer to an
Ethernet port on the router.
• To connect using a WiFi connection, find the router’s preassigned WiFi network name and password on the label on the router.
Open the WiFi connection manager on your computer or WiFi
device, find the router’s WiFi network name, and use the router’s
password to connect.
2. Launch a web browser and uterlogin.
A login window opens.
3. Enter admin for the user name and password for the password.
The BASIC Home page displays.

版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系QQ:729038198，我们将在24小时内删除。